WELCOME MAINT AND REPAIR TO CHAJJA, BALCONY, PARAPET INCLUDING ROOF TREATMENT OF OFFICER MD ACCN AT TAWI VIHAR DHAR ROAD UNDER GE (ARMY) DHAR ROAD

Amount

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above the ground level) in cement concrete

Taking down cement plaster of any description incl racking out joints hacking for keys, scrubbing down with water complete all as specified

M&L 15 mm thick cement plaster on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement

M&L for 15 mm thick in patches rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L 10mm thick rendering on concrete surface of ceiling in CM 1:3 finished the surface even and smooth w/o using extra cement

Extra over rendring or plastering for work in isolated widths or in widths not forming part of geneal plastring such as in bends sunk panels cornnices, skirting, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges all miters and stopped ends etc all as specified and dierected by Engr -In Charge

Preparing new plastered surfaces of walls and applying 2 to 3 mm thick wall care putty over two coats of oil bound distumper over a coat of primer complete all as specified and directed.

Preparing new surfaces applying three coats of white wash on wall complete all as specified.

All as per item Srl No 8 above but on ceiling

Preparing new plastered surfaces of walls and applying two coats of Cement base paint, over a coat of alkali resistant priming paint complete all as specified

M&L for two coat of exterior emulsion paint (Weather Coat) on new plastered surface over a coat of primer case on any type and any height wall/ roof boarder, drops, fins, chajja / roof facia, column etc, including preparation of surfaces complete all as specified.

Complete removal of existing treatment and preparation of surfaces, of any description, complete all as specified.

Preparing of old treated surfaces of wall and applying one coats of distempering oil emulsion (OBD), Note :- Rate including required / nessary wall care putty for close of nails hole and patches n.exc 1 sqm complete all as specified.

Preparing old/ new surfaces applying two coats of white wash on ceiling surfaces complete all as specified.

M&L for applying one coat of synthetic enamel paint on old painted wooden surface exc 10cm width or girth all as specified incl preparation of surfaces

All as per item Srl No 15 above but on steel surfaces

M&L for applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surface complete all as specified exc 10 cm width or girth on new wooden surface

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface incl preparation of surface over 10cm width or girth complete all as specified

M&L apply one coat of white wash on walls incl cornices all as specified incl preparation of old surfaces

M&L for 50 mm thick in Plain cement concrete type C1 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

Dismantling of floor hearth o wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for Glazed ceramic coloured tiles Wall concept glossy 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10mm thick rendering in CM (1:4) on fair face of brick work as in dado/vertical surface even and fair complete all as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick in floors (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.09 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match included 15mm thick in CM (1:4) for laying floor finishes complete all as specified

M&L for vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10mm thick rendering in CM (1:4) on brick or concrete surfaces of finished rough to receive wall tiles complete all as specified.

M&L for vitrified ceramic HD polish /double charge tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.36sqm Not exc 1.00 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 15 mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified.

M&L for vitrified ceramic HD polish /double charge tiles tiles 10mm thick (square/rectangular)polished, area of each tiles exc 0.36sqm and n.exc 1.00 sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10mm thick rendering in CM (1:4) on brick or concrete surfaces of finished rough to receive wall tiles complete all as specified.

M&L for 25mm thick cement concrete type (1:2:4) type B-0 12.5mm gde agg as in flooring complete all as specified

Taking down chowkats with shutters w/o taking of shutters from the frames n. exc 1.50 Sqm

All as per item Srl No 29 above but exc 1.50 Sqm and n exc 4.00 Sqm

Taking downs shutter not exc 1 Sqm each

Taking downs shutter exc 1 Sqm & n exc 2 Sqm each

S/F factory made Factory made, 35mm thick 2nd class hard wood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side sflush shutters 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F factory made 35mm thick 2nd class hard wood glazed/skeleton shutter open rebated and prepared to received glass, gauge etc with mullions (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part I

S&F continuous (piano) hinges mild steel, bright finish or electro glvanised 30mm width of flaps(when open).

S&F 100mm long Hasp and staple mild steel wire type stove enameled black, including bolt to hinge plate and fixed with screws.

Mild steel framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works conforming to Fe-290 Gde E-165

Hacking out old broken glass panes size quality or description from metal frames incl punching or drilling out old glazing pins/ spring clips and providing and fixing new etc

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified

All as per item Srl No 40 but pin headed

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aparture 1.18mm complete all as specified and directed

All as per item Srl No 41 above but fixed in repairs

S&F MS butt hinges medium weight cold rolled mild steel 100mm

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20mm, all as specified .

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, all as specified.

S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20 mm dia, all as specified and directed

S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 15 mm dia, all as specified and directed

S&F in repair Waste coupling, 32mm dia, of CP brass (half or full threaded) .complete all as specified.

S&F in Repair PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified.

S&F in repair mirror cabinetPTMT of 400x500 mm with magnatic locking arrengment fixed with and incl wooden plug with CP brass screw model no Prayage

S&F in repair corner glass shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum wight 300 grms) complete all as specified.

S&F in repair/ new magnetic catcher suitable for kitchen cabinet shutter complete all as specified and directed

S&F PVC (SWR) of 110 mm bore pipes single socketed, in any length with rubber ring joints in walls fixed with hooks and clamps incl taking down old unsv pipes including all fittings complete all as specified and directed.

S&F PVC (SWR) bend suitable for 110mm extrenal dia complete all as specified and directed

S&F PVC (SWR) junction single (single T) equal or unequal of 110mm dia complete all as specified and directed

S&F PVC (SWR) of 75 mm bore pipes single socketed, in any length with rubber ring joints in walls fixed with hooks and clamps incl taking down old unsv pipes including all fittings complete all as specified and directed.

S&F PVC (SWR) bend suitable for 75mm extrenal dia complete all as specified and directed

S&F PVC (SWR) junction single (single T) equal or unequal of 75mm dia complete all as specified and directed

S&F PVC (SWR) of 75 mm bore bends or 'T' any radius provided with access door completed all as specified and directed

S&F PVC (SWR) of 110 mm bore bends or 'T' any radius provided with access door completed all as specified and directed

S&F in repair PVC Water tank cover (threded) for any Ltrs capacity

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm dia of outlet all as specified.

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire gauged shutter fixed as shwon in drg consisting with two nos pintol hinges 75mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, deovitailed or welded each panels complete with necessary cleats and stopers all as specified as directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, fixed type suitable to fix half portion wire cloth and half portion glass with suitable MS beading or flat or oil putty complete.

Providing Kitchen cabinet / cup board shutter in required size at site made out of 18mm thick MDF made out of 18mm thick one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions.

S&F Aluminium handles cast type, anodised, 100 mm size complete all as specifed .

S&F in repair Aluminium handles cast type, anodised, 100 mm size complete all as specifed .

S&F Aluminium handles cast type, anodised, 150 mm size complete all as specifed .

S&F in repair Aluminium handles cast type, anodised, 150 mm size complete all as specifed .

S&F aluminium alloy butt hinges 100mm long with galvanised mild steel hinge pin type C 21.

S&F 100 mm Alumininum tower bolt for cupboard,shutters and fixed with screws all as specifed and directed.

S&F for factory made solid panel PVC door shutter of 30mm thick consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site etc complete all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M/s Square Tube, supplying and fixing in opening as per specification and drawing.

S&F 250mm long Aluminium alloy, anodized sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded section or cast aluminium alloy and fixed etc.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match including moulding chamfered edges and driling holes to the gas pipes with shade of granite. complete all as directed.

S&F in repair grating square 100mm size of PTMT complete (Min wt 100gms) with hole/with out holes. All as specifed and directed.

S&F Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including dusmantling the old tank all as specified .

S&F Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including dusmantling the old tank all as specified .

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore(Min Wt 20mm- 210 gms)

S&F in repair Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in 20mm PTMT Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete

S&F in 25mm PTMT Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified as directed

S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m),(e) M&L for PCC 1:7 :12 for fillin of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX. lAFARGE, TEXA, STP, BENGAL AQUAFLUX.

Dismantling wall ceiling and boards, (fibere pulp, insulation etc.0 or insulation boards abdy thickness including cover fitllets.

Providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottoam tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners manufacturers instructions complete. MAKE: VINYL TOUCH of LaGyp (LAFARGE) or equivalent in GYPROC (SAINT GOBBAIN).

Fixing only False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottoam tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners manufacturers instructions complete. MAKE: VINYL TOUCH of LaGyp (LAFARGE) or equivalent in GYPROC (SAINT GOBBAIN).

S&Fin repair stainless steel plate racks of size 750mm x 900 x 250mm and thickness of SS strip of n.exc 05mm fixed on wall etc complete all as specified.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,incl sink coupling, 40 mm waste fitting overall size 1040x510mm bowl size 510x405x203 mm complete all as specified and as directed.Make Nirali or equalent make.

S&F for sink mixter with regular spout wall mountated with connectings legs & wall flanges and including all necessary fittings Make Jaquar Cat Part No -CON 319KN/Cera or Equivqlent in repair make complete all as specified.

S&F in repair 15 mm dia bore fancy type chromium plated bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. Make ESS ESS/Jaquar or equivalent .

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. Make Jaquar Cat Part No -CAN-1131N /Cera or Equivqlent make complete all as specified.

S&F wall mixturer with provision for overhead shower with 115 mmlong bend pipe on upper side,connecting legs & wallflanges. Make Jaquar Cat Part No -CON 273KNUPR /Cera or Equivqlent make complete all as specified.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.Make Jaquar Cat Part No -CAN 1111SM /Cera or Equivqlent make complete all as specified.

S&F chromium plated towel rings fixed with screws etc complete all as specified .Make Jaquar Cat Part No -ACN 1121N /Cera or Equivqlent make complete all as specified.

S&F corner glass shelf 200 mm(brass brackets) Make Jaquar Cat Part No -ACN 1173 /Cera or Equivqlent make complete all as specified.

S&F in repair brass chromium plated shower rose 200 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed Make : ESS ESS cat part No- RF 202 for shower and Cat Part SA-105 for shower Arms/Kohler or Equalent make.

S&F in repair 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed. Make Jaquar Cat Part No -CON - 059KN/Cera or Equalent make.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply complete all as specified. Make Prayag Cat part No BCT-04/Polytuf or equalent make.

S&F in repair wash hand basin table top of size 425x340x175 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. Make Jaquar cat part No - CNS-WHT-903/Kohler or equalent make.

S&F Brass CP centre hole mixer without pop up waste system 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.Make Jaquar Cat Part No - CON-167KNV/Cera or equalent make.

M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 360x680x765mm, strap 220 mm cistern with cistren fittings for 755SS, 755SN and necessary fittings complete all as specified . Make Jaquar Cat Part No- CNS-WHT-755SS/Kohler/Equalent Make.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. Make Cera Cat Part No Calina S 3010102/Hindware or Equalent make.

S&F in repair (Plastic Polymer Cistern) valve less, with top button double action type flushing cistern of capacity 10 ltrs , low level white inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type incl provision of 32mm PVC flush pipe of required length and making connections complete incl taking down old one by dismantling the existing unserviceable cistern of any description Make: Prayag Cat Part No 504/ parryware or equivalent.

S&F stainless steel peg set of six suitable size of length complete etc Make Prayag Cat No BEA 30/ Equalent make.

S&F toilet paper holder of stainless steel fixed to wall with CP brass screw all as specified.Make Jaquar Cat Part No AKP 35753PS/ESS ESS or Equalent make.

S&F chromime plated, cast copper alloy jet spray with 1 mtr PVC type (for European seat) complete all as specified. Make Cera Jaquar/ESS or equalent.

M&L for 25mm dia Decorative/ fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC/steel conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.

M&L for providind RCC nominal mix 1:2:4 incl necessary formwork and providing plaster of 1:3 and two coats of finishes over a coat of primer for RCC projected portion as in drawts, facia, fins etc incl demolition of existing and providing TMT bars if reqd all as specified and directed. ( Note Length of drawts,fins,facia shallbe measured inrespect of any thickness and heigth)

M&L for repair of RCC slab,coloumn,beam by removing of old portion of concrete and cleaning/brushing and removing of loose concrete/ applying required cement slurry @ 3.5 Kg/Sqm making goog with concrete 1:1.5/3 and applying 3 mm thickcement mortar 1:4 and finish the surface all as specified and directed.

M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in-Charge

Roof tratetment for non -accessible Roof:- (a) 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl water proofing compound (b) Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm Top surfaces of roof after carrying out treatment as specifed hear-in -above shall be provided with 2 coats of aluminium paint over a coat of primer as per manufacturing,s indstruction complete all as specified and directed. Note:- Rate included this item (a) and (b) except water froofing compund

Taking down old PCC tiles from roof and removing bedding at any position all as specified and directed

Roof tratetment for accessible Roof:- (a) 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl water proofing compound (b) Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm all as specified and directed . Note:- Rate included this item (a) and (b) except water froofing compund

M&L Cement concret coloured tiles with cement and no pigment 30 cmX30 cm x20mm thick machine pressed set jointed and including 15mm screed bedding in CM 1:4 as pointed in neat cement slurry in flooring as cut and poslished all as specified.

Making benching with PCC (1:2:4) type B0 (12.5 mm agg) using WPC along side wall adjoining to roof in concave shape complete all as specified.

S&F in repair 40/50mm dia sink coupling PTMT (half or full threaded) complete all as specified and directed

M&L for 100mm bore galvanized steel water pipe medium grade 0.90m length including demolition of brickwork any description and making good with sub class 'B' bricks built in CM (1:4) and 15mm thick rendring on both side of brick work in CM 1:4 finished fair and even without using extra cement including mixing of water proofing compound complete all as specified.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

NARESH KUMAR KHAJURIA

M/S PEE BEE SALES CORORATION

JINDAL BUILDERS