Construction of Cafeteria cum Public Convenience from Pul Doda to Kishtwar at TRC Kishtwar 2nd time

Amount

Earth work in excavation by manual means in trenches for formation of drain, pipe,cables etc (not exceeding 1.5 mtr in width) and for shafts,wells casspits and the like not exceeding 10 sqm on plan, depth up to 1.5 m including disoal of excavated earth up to 1 m from cutting edge disposed earth is to be levelled and neately dressed in all kinds of soil.

Providing and laying in position cement concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 crushed stone aggregate 40 mm nominal size ) including all leand and lift.

Reinforced cement concrete 1:1.5:3 mix (1 cement 1.5 coarse sand 3 crushed graded stone aggregate 20 mm nominal size) including attached Pilasters,buttresses,plinth and string courses, fillets, columns, pillars,piers, abutments, posts ans sturts, ect. up to floor five level excluding cost of centring and shuttering finishing and reinforcemnt incouding all leand and lift.

Providing and laying in position cement concrete excluding the cost of centring and shuttering all work up to plinth level 1:3:6 (1 cement : 3 coarse sand: 6 graded stone 20 mm nominal size) including all lead and lift.

Reinforcement for RCC work including straightening, cutting, bending and binding and placing in position all complete. (TMT bars )

Centering and shuttering including strutting, propping etc and removal of form work in Foundation, footings, slab etc. incuding all llead and lift

Brick work in common burnt clay FPS (non modular bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1cement: 6 cement coarse sand). Including all lead and lift.

Extra brick work in superstructure above plinth level up to floor V level by manual means incuding all lead and lift

Providing and fixing glazed shutter for doors, windows, and clerestory windows using 10 kg per sqmt(4 mm thick) float glass pans, including ISI Marked MS prressed butt hinges bright fininshed of required size with necessary screws 2nd class Kail wood including all lead and lift. 30 mm thick

Providing and fixing 30 mm thick wire gauge shutters using galvinized MS wire gauge of everage width for apearture 1.4 mm in both directions with wire of dia 0.63 mm for door , windows and clerestory windows ISI marked M.S pressed But hinges bright finished butt hinges of required size with necessary screws in 1st class Kail wood including all lead and lift.

Decorative plywood one side decorative veneer and commercial veneer on other face (type 1) conforming to IS 1328 BWR Type) partical board 12 mm thick including all leand and lift.

Structural steel work welded in built up sections , trusses and frame work including cutting ,hoisting , fixing in position and applying a priming coat of approved steel primer all complete including all lead and lift.

Providing and fixing colour coated tile profile 0.5 mm thick sheet for roofing as approved by engineer incharge incuding all lead and lift complete job

Providing and fixing colour coated ready made ridge 600 mm in width 0.5 mm thick as approved by engineer incharge including all leand and lift.

12 mm thick cement plaster 1.6 mix (1: cement :6 coarse sand) including all land and lift.

Providing wood work in frames of fals ciling,partition etc sawn and fixed in position using 2nd class kail wood

Providing and fixing MS grill of required pattern in frames of windows etc with MS flats, square or round bars etc including priming coat with approved steel primer all complete fixed to opennings/wooden frmes with rawl plugs screws etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less then 0.08 percent and confirming to IS 15622 of approval make in all colours and shades laid on 20 mm thick in cement mortor 1:4 (1: cement :4 coarse sand) incuding grouting the joints with white cement and matching pigments etc. complete size of tile 60 cm X60 cm including all leand and lift. (tile used NITCO,ORIENT, KAJARIA or equal make )

Providing and fixing 1st quality ceremic glazed tiles confirming to IS 13753 of miminum thickness 5 mm of approved make like Nitco, orient, sumany, Kajaria or equivalent make in all colours, shades except Begundey bottle green, black, of any size as approved by engineer incharge in skirting, risers of steps and Dados over 12 mm thick bed of cement mortor 1:3 (1:cement :3 coarse sand) and jointing with grey cement slury @ 3.3 kg per sqmm including pointing in white cement mixed with pigament or matching shade complete job.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enimal paint of approved brand and manufacturer to give an even shade two or more coats on new works

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth compele job ilncluding all leand and lift.

Wall painting with plastic emulsion paint of approved brand and manufacture to gien an even shade. Two or more coats on new work.

Providing and fixing 12 mm thick ply board cealing including cost of MS screws etc complete job including all lead and lift.

Providing and fixing of aluminum tower bolts ISI marked anodized (anodic coating not less then grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc complete job (200X10 mm ) including all lead and lift.

Providing and fixing of aluminum sliding door bolts ISI marked anodized (anodic coating not less then grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc complete job (300X16 mm ) including all lead and lift.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1: cement :3 coarse sand :6 graded stone aggreate 20 mm nominal size on 75 mm bed of dry brick blast 40 mm nominal size well rammed, considering and groating with fine sand including finishing the top smooth

Providing and fixing of aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparant or dyed to required colour or shade with necessary scrrews etc. complete (125 mm ) including all lead and lift.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand )R.C.C top slab with 1:2:4 mix (1 cement :2coarse sand :4graded stone agg. 20mm nominal size) foundation concrete 1:4:8 mix (1 cement :4coarse sand :8 graded stone agg. 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone agg.20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal dimenssing total weight of cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg) with F.P.S bricks with class designation 75 & with crushed stone agg. Including all lead & lift

Providing and fixing white vireous china pedestal type water closet (European type W.C pan) with seat & lid C.P brass hinges & rubber buffer, 10litre low level white PVC flusling cistern with manually controld device (handle lever) confirming to IS :7231, with all fittings, C.I/M.S brackets 40mm diameter flush bend with fittings and clamps, over flow avrangements with specials and mosquito proof couplings of approved municipal disigen complete including painting of fittings and brackets, cutting & making good the walls and floors wherever required w.c pan with ISI marked white solid plastic seat & lid. Including all lead & lift

Providing and fixing wash basin with C.I/M.S brackets,15mm C.P brass pillar taps,32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, flat back wash basin size 630x450mm with a single 15mm C.P. brass pillar taps. (Jaquanale) as aproved by Engineer Incharge complete job including all lead and lift.

Providing and fixing wash basin mixer CP brass Jaguar make complete job including all lead and lift.

Providing and fixing white vireous china pedestal for wash basin completely recessed at the back for reception of pipes and fittings including all lead and lift.

Providing and fixing mirror of superior glass (of approved quality)and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board baking. Rectangular shape 453x357mm Including all lead & lift

Providing and fixing toilet paper bolder C.P brass.

providing & fixing white vitreous china flat back or wall corner type lipped front urinal basin of 4300x260X350 mm and 340X410X265 mm sizes respectively with automatic flushing cistern with C.I / M.S bracket standard size of G.I. flush pipe and CP brass spteaders with brass unions and GI clamps complete, including painting of fittings & brackets, cutting & making good the walls & floors whereever required. one urinal with 5 liters P.V.C white automatic flushing cistern of approved quality as approved by engineer incharge complete job including all lead & lift.

Providing and fixing C.P. stop cock (concealed) of standard design of approved make confirming to IS :8931 of 15 mm nominal bore including all lead and lift. Jaguar make

Providing and fixing C.P. bross angle valve for basin mixer and gyser points of approved make confirming to IS :8931 of 15 mm nominal bore including all lead and lift. Jaguar make

Providing & fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810gm. 15mm nominal bore Including all lead & lift. Jaguar make

Providing and fixing of multi jet of stender quality with necessary fitting complete job. Jaguar make

Providing & fixing PVC waste pipe for sink, wash basin including PVC waste fillings complete Including all lead & lift

providing and fixing PVC pipe 4 kg /sqm pressure, suprime /uniplas/phenolex make (B calss) including all lead and lift.

150 mm nominal bore

100mm nominal bore

75 mm nominal bore

Providing and fixing of G.I. pipes complete with G.I. fittings, including cutting and making good the walls including all lead and lift.

15 mm dia medium

20 mm dia medium

25 mm dia medium

Providing and fixing of PVC junction of approved including all lead and lift

150 mm bore

100 mm bore

75 mm bore

Providing and fixing of PVC bend of required degree and design of approved make including all lead and lift.

150 mm bore

100 mm bore

75 mm bore

Providing and fixing G.I. union in G.I. pipes including cutting threading the pipe and making screw etc. complete job (medium)

15 mm dia bore

20 mm dia bore

25 mm dia bore

Providing and placing on terrace (at all floor levels) polytheylen water storage tank ISI 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without gillings and the base support for tank (sintex,electroplst, sar, lotus, or equivalent having valid ISI license). including all leand and lift.

Providing and fixing 600X120X5 mm thick glass shelf with edges round ofsupported on anodished aluminum angle frame with C.P brass brackets and guared rail complete fixed with 40 mm long screws rawl, plugs etc. complete job .

Providing and fixing PTMT towel rings trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall fall with concealed fittings, arrangement of approved quality and colour, weighting not less then 88 grms Jaguar make

Providing and fixing wooden moduled corner bidding of tringular shape to the junction of panelling etc. with iron screws plugs and priming coat at exposed surface etc. complette 50mm X 50 mm (base and hight) in 2nd class kail wood including all leand and lift.

Providing and fixing salem stainless steel AISI 304 ( 18/8) kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fitting and brackets, cutting and making good the walls where ever required : 510X1040 mm bowl depth 178 mm kitchen sink with drain board including all lead and lift.

Providing and fixing ornametal colour coated ready made ewes boarding 300 mm width with 12 mm ply board including all leand and lift.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked MS pressed butt hinges bright finished of required size with necessary screws excluding panelling will be paid for seprately, all complete as per direction of engineer incharge 1st class kail wood (30 mm thick)

nazir ahmad sheikh

m/s Roshan Lal

RIYAZ AHMED MALIK

Sat Pal Parihar

Javeed Iqbal Ahanger

Ravi Kumar Shan

SH. AJIT SINGH PARIHAR