ADDN/ALTN TO PERIMETER SECURITY WALL AT ABH MESS UNDER GE NEW DELHI, DELHI CANTT-10

Amount

Excavating over area not exceeding 1.5 m deep and getting out in any type of soil incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified & directed. (Note - Excavation any type of soil soft/Hard/Disintegrated/Rock carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

Excavating over area exceeding 1.5 m deep but not exceeding 3.0m deep and getting out in any type of soil incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified & directed. (Note - Excavation any type of soil soft/Hard/Disintegrated/Rock carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in any type of soil incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified & directed. (Note - Excavation any type of soil soft/Hard/Disintegrated/Rock carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

Excavating over area not exceeding 1.5 m deep and getting out soft/Disintegrated rock incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified & directed. (Note - Excavation any type of soil soft/Hard/Disintegrated/Rock carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

Excavating over area not exceeding 1.5 m deep and getting out Hard rock incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified & directed. (Note - Excavation any type of soil soft/Hard/Disintegrated/Rock carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

Excavating over area exceeding 1.5 m deep but not exceeding 3.0m deep and getting out soft/Disintegrated rock incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified & directed. (Note - Excavation any type of soil soft/Hard/Disintegrated/Rock carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

Retuning filling, including spreading, leveling, watering and well ramming in layers not exc 25 cm each layers complete all as specified & directed. (Note -Retuning filling carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

Demolition of cement concrete unreinforced of any description and in any position not other wise specifically provided as in drain copings and similar situations incl removing the unserviceable material out side the MOD land complete all as specified & directed.

Demolition of reinforced cement concrete of any description and any position no otherwise specifically ( below or above ground level) including cutting of reinforcement as required to facilitate demoilition incl removing the unserviceable material out side the MOD land complete all as specified & directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, drains, culverts and walls etc but excluding ashlar facings, dressed stone work and pre cast concrete articles, built in cement mortar incl removing the unserviceable material out side the MOD land complete all as specified & directed.

M&L for lean concrete 1:4:8 type D2(using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for 18/20mm thick preformed fillar board and covered both side with S/Steel sheet fixed wall with S/S screw and complete all as specified & directed

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in foundations, including rafts, footings, foundation beams, plinth beems, bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in columns, pillars, piers,posts and struts etc complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in beams, cantilevers, bressummers,lintels etc complete all as specified and directed.

M&L for reinforced cement concrete (Nominal Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, chajja, deck slab and in shelves and the like complete all as specified and directed.

M&L Form work to sides of concrete foundation, footings,bases of columns, raft and raft beams sides ans soffits (if any) of foundation and plinth beams and simmilar work vertical or batter finished rough surface of concrete complete all as specified and directed.

M&L Form work square, rectangular to sides of pillars, posts,sturts, piers,columns and stanchions and simmilar work vertical or batter finished rough surface of concrete complete all as specified and directed.

M&L Form work to sides and soffits of floor or roof beams, beams haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams etc. finished rough surface of concrete complete all as specified and directed.

M&L Form work to soffits of suspended slab such as roof slab floor slab landings and simmilar work flat for fair finished urface complete all as specified and directed.

M&LFormwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. finished rough surface of concrete complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and any positions not other wise provided for.complete all as specified and directed.

S&F for posts and struts/grills in fencing including cutting tops to shape as directed drilling holes, notching for wire, etc, flat iron fillits (for securing wire mesh etc,) including all necessary drilling, bolting or riviting, etc and similar work confirming to Fe-290 Gde -E-165 complete all as specified & directed

S&F framed work such as grills, gratings framed and hung gates, including pintels,hinges,stopes, hand made sliding bolt etc with ends of bars shouldered and/or riveted, welded or forged into spikes framed guard bars, barred doors & walk ways railings frame work of water tank and similar work up to six story bldg including necessary seafty precaution confirming to Fe-290 Gde -E-165 complete all as specified & directed

M&L for premix/readymix plaster 15mm thick on brick surfaces of walls, etc finished even & smooth without using extra cement over a coat of ultratech seal and dry 5 plush as bonding agent including necessary form work safety precuation complete all as specified & directed.

M&L for Washed stone grit plaster makes ornamental designed/shapes as per site required on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings inluding providing grooves as per site requirement with connected materials complete all as specified & directed.

M&L brick work with fly ash bricks as per sample approved by GE of straight or curved on plans exc 6m mean radius built in CM 1:4 complete all as specified.

M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and 3mm thick wall care putty complete all as specified & directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed

All as per Srl item No 30 here-in-before but 6mm to 8 mm dia

All as per Srl item No 30 here-in-before but 5mm dia and over up to and including 10mm dia as in stirrups, spacers and binders.

Supply and laying in position including jointing of reinforced concrete pipes of 600 mm bore pipes, class NP 2, laid and jointed with collars including taking down complete all as specified and directed.

Supply and laying in position including jointing of reinforced concrete pipes of 300 mm bore pipes, class NP 2, laid and jointed with collars including taking down complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, vertical surface of walls etc. complete all as specified & directed

M&L for black or any coloured granite (of any type) work 18-20 mm thick table rubbed and polished as in platform, face lifting of lift area and like , machine cut laid over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting,roundining edges and polishing complete all as specified & directed

All as per Srl item No 36 here-in-before but as in vertical surfaces such as dado/skirting laid over and including renderning premix/readymix plaster 10 mm thick on brick or concrete surfaces of ceiling, chajaas,columns, beams and similar work in CM 1:4 finished even & smooth without using extra cement over a coat of ultratech seal and dry 5 plush as bonding agent jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete.

M&L for Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed urface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, ecess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 laid over and including 15 mm thick screed bed in CM 1:4, including cutting and polishing complete all as specified & directed

All as per item No 38 here-in-before but as in vertical surfaces such as dado/skirting laid over and including renderning 10 mm thick in CM 1:4 jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete.

S&F 110 mm dia PVC (SWR) soil pipe, waste and rain water pipe single socketed in any length with rubber ring jointed, as in securiry wall complete all as specified and directed.

All as per Srl item no 40 here-in-before but 75 mm dia.

M&L for Butch stone cladding of size 150 x 600mm and 15 to 20 mm thick as in vertical surfaces such as dado/skirting laid including premix/readymix plaster 10mm thick on brick or concrete surfaces of walls in CM 1:4 finished even without using extra cement over a coat of ultratech seal (or equivalent from approved list of makes)and dry 5 plush (or equivalent from approved list of makes) as bonding agent complete all as specified and directed. jointed with grey cement slurry and incl pointing in white cement (1:2) with admixture of pigment to match with shade including cutting and polishing complete all as specified and directed.

M&L for laminam slim walls tiles size and coloured/patterns as per sample approved by GE for works on vertical surfaces such as skirting/dados/wall cladding set and jointed with solvent/solution of same manufacturer and pointed in coloured cement to match including premix/readymix plaster 10mm thick on brick or concrete surfaces of walls in CM 1:4 finished even without using extra cement over a coat of ultratech seal (or equivalent from approved list of makes) and dry 5 plush (or equivalent from approved list of makes) as bonding agent complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6.00m mean raduis built in CM 1:4 complete all as specified and directed.

M&L for premix/ready mix plaster 5mm thick on concrete surface of wall, chajjas, roofs, beams, column etc finished even & fair without using extra cement over a coat of ultratech seal and dry 5 plus as bonding agent including necessary form work safety precaution complete all as specified and directed.

Description of Work / Item(s)

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in any type of soil incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified & directed. (Note - Excavation any type of soil soft/Hard/Disintegrated/Rock carried out by only manually without any damages, and no extra cost paid by MES/Govt for repaires of damages any type of existing services)

All as per Srl item No 1 here-in-before but exceeding 1.5m to 3.0m deep.

Retuning filling, including spreading, leveling, watering and well ramming in layers not exc 25 cm each layers complete all as specified & directed.

Demolition of cement concrete unreinforced of any description and in any position not other wise specifically provided as in drain copings and similar situations incl removing the unserviceable material out side the MOD land complete all as specified & directed.

Demolition of reinforced cement concrete of any description and any position no otherwise specifically ( below or above ground level) including cutting of reinforcement as required to facilitate demoilition incl removing the unserviceable material out side the MOD land complete all as specified & directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, drains, culverts and walls etc but excluding ashlar facings, dressed stone work and pre cast concrete articles, built in cement mortar incl removing the unserviceable material out side the MOD land complete all as specified & directed.

M&L for PCC 1:3:6, type C-1 (20 mm agg) as in drain finished even & smooth surface without using extra cement complete all as specified.

M&L pre cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slabs for manholes, drains and such similar works including set in CM 1:6. complete all as specified.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, chajja, deck slab and in shelves and the like complete all as specified and directed.

M&L Form work to soffits of suspended slab such as roof slab, floor slab, landings and simmilar work flat for fair finished urface complete all as specified and directed.

Supply only liquid water proofing compoundcomplete all as specified & directed

Dismantling wrought iron or mild steel work of any description and any positions not other wise provided for.complete all as specified and directed.

Taking down cement plaster of any description on brick, concrete or stone walls, colunns, drains, raking out joints, hacking for key and scrubbing down with water etc to receive new plaster complete all as specified and directed.

M&L for premix/readymix plaster 15mm thick on brick or concrete surfaces of walls, chajja, roofs, beams, colunns etc in CM 1:4 finished even & smooth without using extra cement over a coat of ultratech seal and dry 5 plush as bonding agent including necessary form work seafty precuation up to six storey bldgs complete all as specified & directed.

M&L brick work with sub class 'B' bricks, straight or curved on plasn exc 6.00 m mean radius built in CM 1:4 complete all as specified.

All as per item no 15 here-in-before but except brick.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed

All as per Srl item No 17 here-in-before but 6 to 8 mm dia

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & directed

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggragated) as in plinth courses, string courses, mud stops or roof kerbs, benchning, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified & directed

Description of Work / Item(s)

Amount

Demolition of cement concrete unreinforced of any description and in any position not other wise specifically provided as in drain copings and similar situations incl removing the unserviceable material out side the MOD land complete all as specified & directed.

M&L for 75 mm thick PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in hard standing, paths, floor etc. finished rough surface without using extra cement complete complete all as specified.

Dismantling floor, hearth or wall tiling, interloking , paver block any type or pattern including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L machine pressed pre cast cocrete interlocking decorative paver block PU coated of any size and shape confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment, size and shape of paver as approved complete all as specified and directed.

All as per Item No 04 here-in-before but ecept tiles re-use the serviceable tiles after dismantling on same place.

M&L for chequerd cement concrete tiles 200x200x25mm/300x300x25mm thick of approved colour and design (Square/ rectangular) as in paths, floors etc set and jointed in neat cement slurry with gray cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L laying of fine agregate ( sand) 50 mm thick for laying of interlocking paver vide item No 15 above including watering and consolidation etc complete all as specified.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggragated) as in plinth courses, string courses, mud stops or roof kerbs, benchning, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified & directed at site.

Description of Work / Item(s)

Amount

M&L point wiring with PVC FRLS indualted unsheathed multi-stranded copper conductor of size 2.5 sqmm 1100V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 2.5 sqmm as earth continuity conductor connected to common earth dolly in PVC concealed conduit and its accessories for LED strip light complete all as specified & directed.

S&F strip non integral flexible LED strip light with high brightness for indoor and outdoor application strip type 75 watt 230 volt AC IP 65 protection with driver complete all as specified.

S&F post top lantern LED type 45 watt 230 volt AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete all as specified and directed.

S&F modular switch 16 A SP one way 240 volt complete all as specified and directed.

S&F modular socket 16 A 2/3 pin combination 240 volt complete all as specified and directed.

Phoenix Infra

M/S ANIL KUMAR

M/S Parshant Associates

SANJEEV ENTERPRISES

imran construction company

L G BUILDERS

AMIT ASSOCIATES

M/s R. K. Bhambri

M/S Sunil Steel Works

M/S ANIL KUMAR

imran construction company

M/S Parshant Associates

SANJEEV ENTERPRISES

L G BUILDERS

AMIT ASSOCIATES

M/s R. K. Bhambri

M/S Sunil Steel Works

M/S ANIL KUMAR

AMIT ASSOCIATES

M/s R. K. Bhambri

SANJEEV ENTERPRISES

M/S Parshant Associates

imran construction company

L G BUILDERS

M/S Sunil Steel Works

L G BUILDERS

SANJEEV ENTERPRISES

AMIT ASSOCIATES

imran construction company

M/s R. K. Bhambri

M/S Parshant Associates

M/S ANIL KUMAR

Bidder Name

M/s R. K. Bhambri

AMIT ASSOCIATES

M/S ANIL KUMAR

SANJEEV ENTERPRISES

imran construction company

L G BUILDERS

M/S Sunil Steel Works

M/S Parshant Associates

Phoenix Infra