NIT No GE/ND-66/2024-25

Amount

B&R PORTION: M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Brick work with sub class "B" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6), (up to two story Bldg) complete all as specified and directed.

M&L for Brick work with sub class "B" bricks , straight or curved on in half brick thick wall built in cement mortar (1:4), (up to two story bldgs) complete all as specified and directed.

M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including including 20mm thick screed bed in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounded edges with shade of Udaipur green including dismantling old unsv slab any description complete all as specified and directed.

M&L for vitrified Ceramic tiles, double charged, light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 10mm thick rendering in cement mortar (1:6) including dismantling old unsv floor hearth complete all as specified and directed.

M&L for vitrified ceramic tiles double charged (light shade) 10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/ coloured cement to match the shade of tiles including dismantling old unsv floor hearth complete all as specified and directed.

M&L for Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 including dismantling old unsv floor hearth complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles including dismantling old unsv floor hearth complete all as specified and directed.

M&L for Glazed ceramic tiles of approved colour and design in vertical surfaces 300x450x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4 including dismantling old unsv floor hearth complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan single piece syphonic action , white fixed in repair, including soft close sheet cover of closed pattern with flat bottom complete all as specified and directed. Make: Hindware Cat part No 20121 or equivalent of make as specified in PS.

S & F in repair Vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete. Squatting pan including connection to trap, and incl flushing cistern, anti-siphonage pipe, etc including making good to floor complete complete all as specified and directed.

S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, dual tank , syphonic action type, white with inlet ball valve float and handle complete all as specified and directed.

S&F in repair , brass chromium plated Health Faucet including flexible pipe of 15 mm bore and 1.20M long with and including 15 mm bore complete all as specified and directed. Make: Jaguar Cat Part No ALD-573 or equivalent of make as specified in PS.

S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed. Make: Jaguar Cat No CAN-1151N or equivalent of make as specified in PS.

S & F in repair Vitreous China wash basin with pedestal white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.

S&F as in repair chromium plated shower rose of size 100 x 100 mm square (ABS Chrome plated with rub it cleaning system) with or without swivel joints any type including chromium plated shower arm fixing to steel pipe and union complete all as specified and directed. Make: Jaguar Cat No BSH-1751 or equivalent of make as specified in PS.

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughened glass with CP railing fixed with screws fancy type complete all as specified and directed.

S&F in repairs wash hand basin mixer 15mm dia CP brass fancy type including joints to steel pipe or unions complete all as specified and directed. Make: Jaquar cat part no ORP-10011 BPM or equivalent of make as specified in PS.

S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make: Jaquar Cat Part No FLR5281N, CERA Cat Part No F2008401, Hindware Cat Part No F570022 or equivalent of make as specified in PS.

S&F in repairs bib tap with crutch or butterfly handle, quarter turn screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed. Make: CERA (Cat part no. F1001151), Prayag (Cat Part no. 9106), Somany (Cat part no. 272211150031) or equivalent of make as specified in PS.

S&F in repair fancy type brass chromium plated soap dish, complete all as specified and directed. Make: CERA cat part No F5004106, Prayag Cat Part No BA15, Somany Cat Part No 27213033051 or equivalent of make as specified in PS.

S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. Make: Jaquar Cat Part No FLR 15053PM, CERA Cat Part No F1001201, Hindware Cat Part No F570043 or equivalent of make as specified in PS.

S&F in repairs Good quality Connection pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and directed.

Taking down (Door) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed.

Taking down (Door) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

M & L for Cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in back filling, holdfasts etc, complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge complete all as specified and directed. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge complete all as specified and directed. Note: stainless steel butt hinges shall be paid separately under relevant item

Dismantling wrought iron or mild steel/ iron work of any description (steel window & Grill) complete all as specified and directed.

M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F welded steel wire fabric, n.exc 4 Kg weight per sqm, cut to length bent to shape required and fixing with and including annealed mild steel wire not less than (0.90 mm dia or fixing with galvanised steel staples or welding supplied and fixed complete to wood or steel members complete all as specified and directed.

S&F factory made uPVC any colour fixed glazed window/ventilator made of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherever required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge complete all as specified and directed. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body it single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S &F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming ti IS 1161-1979 grade St-240 complete all as specified and directed.

S &F rolled section as in main cross beam, hip and jack rafters,purlins where connected to common rafters and running rails guids for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed.

M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed.

S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and directed.

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.

S&F in repair 25 mm dia SS curtain rod stainless steel AISI 304 , with fixing of brackets, side knobs of good quality as approved complete all as specified and directed.

S&F 300mm long, stainless steel , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts and sliding bolts complete all as specified and directed.

S&F 150mm long stainless steel barrel tower bolt of extruded section, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring and fixed of 140 mm overall length of cover plate complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore complete all as specified and directed.

Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling with fitting as required complete all as specified and directed.

Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling with fitting as required complete all as specified and directed.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position complete all as specified and directed.

S & F in repairs PPR gate valve, for iron pipe 20 mm bore complete all as specified and directed.

S & F in repairs PPR gate valve, for iron pipe 25 mm bore complete all as specified and directed.

S&F, in repairs, cast iron floor trap with Cockroach Proofing CP grating with or without hole including jointing to waste pipes , fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified and directed.

S&F in repair Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debris from the MOD land complete all as specified and directed.

M&L for cement plaster 15mm thick in CM 1:4 on brick or conc surfaces finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 250gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc complete all as specified and directed. NOTE : Rates for water proofing compound/ polymer deemed to be included in the above rates.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of board and fixing stainless steel screw with flat iron plate of required size with necessary full body threaded star headed counter sunk SS Screws all as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company for wall panelling including dismantling old unsv panelling complete all as specified and directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of board and fixing stainless steel screw with flat iron plate of required size with necessary full body threaded star headed counter sunk SS Screws for board as on roof false ceiling all as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company including dismantling old unsv ceiling complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed .

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats Distempering with, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.

M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position (opening of shutter exc 2.00 m and not exc 3.50 m and area exc 6.00 sqm and n.exc 9.00 sqm) complete all as specified and directed.

S&F in repair steel rolling shutters, thickness of lath 1 mm, with ball bearing including hood cover made out of MS sheet thickness not less than 1mm, anchoring rod and hasp & staple, including mild steel lock plate and handle made out of flat iron 35x5mm, including guide channel and bracket plate made out of MS sheet thickness not less than 3.15mm, roller, spring as suitable size and plate and locking arrangement and including two coat of synthetic enamel paint and one shop coat of primer erected in position where required (in patches or whole), complete push pull or manual type complete all as specified and directed as per SSR part -I 2009.

S&F in repair fancy type stainless steel towel rack size 600mm X 300mm including a pair of brass bracket complete all as specified and directed. Make: CERA cat part no. F5003101, Prayag Cat Part No BA12, Somany Cat Part No 272130330101 or equivalent of make as specified in PS.

S&F 4.00 mm thick figured glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified and directed.

Cutting shrubs, wild growth, plants not exc 30 cm girth grown on permanent structures and removing same from roots and stopping the recurrence by injecting herbicide Glyphosate 4+ solution (04 % concentrate) into plant root to eliminate further growth. Application shall be as per manufacturer instructions. The disturbed area shall be repaired with PCC (1:2:4) Type B0 mix and surface finished even and smooth in cm 1:4 incl applying two coats of matching finish of adjacent area Minimum plant in each block is 10 Numbers complete all as specified and directed.

Dismantling A.C/Fibre sheet corrugated or semi corrugated sheet in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs elegent mirror PVC cabinet without towel rail of size 422 x 622 mm complete all as specified and directed.

M&L for outdoor tile parking tiles size 300 x 300 mm conforming to IS 15622:2017 including 20mm screed bed in CM 1:6 as in flooring over 75mm thick PCC 1:3:6 type C2 ( using 40mm graded aggregates) including old dismantling tiles complete all as specified and directed.

M & L 100mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over 50mm sand cushion including dismantling old unsv paver block complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed.

E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan point controlled by one no, one way 5 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 81.00 above but One three pin socket outlet 5 amps point controlled by one no, one way switch on independent board complete all as specified and directed.

All as per item No 81.00 above but One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.

All as per item No 81.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

S&F in repair modular switch 230/250 volts grade one way SP 6 Amp rating complete all as specified and directed.

S&F in repair modular switch 230/250 volts grade one way SP 16 Amp rating complete all as specified and directed.

S&F in repair modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 pin 6 Amp combined 2 module type complete all as specified and directed.

S&F in repair modular socket out let shuttered type flush mounting type, 230/250 volts grade 2/3 pin 16 Amp combined 2 module type complete all as specified and directed.

S&F in repair Modular AC socket with plug and socket 20 Amp with one MCB single pole, 20 Amps 240 volts complete all as specified and directed.

S&F in repair factory made SPN DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way SPN 220 Volts, with suitable busbar, neutral link & earth link suitable complete all as specified and directed.

S&F in replacment of MCBs, SP 6 to 32 Amps, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs complete all as specified and directed. Note: Make of the MCB should be the same as that of DB

S&F in replacment of MCBs, SPN 40-63 Amps, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs complete all as specified and directed. Note: Make of the MCB should be the same as that of DB

Supply and fixing in repair LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLSH type, 1100 volts grade 2 x 4 sqmm complete drawn in existing conduit along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- New conduit of suitable size with connected fitting will be laid if there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes including making good to disturbed surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S&F in replacement aesthetically designed Wall mounted decorative picture LED light of 6-10 W fixture with opal diffuser to give glare free light complete all as specified and directed.

S&F in replacement aesthetically designed surface mounted round shaped decorative wall/ceiling LED light of 15 W fixture with opal diffuser to give glare free light including suitable LED lamp of 15 W complete all as specified and directed.

S&F in replacement aesthetically designed reccessed mounted 2x2 LED light of 36 W fixture with opal diffuser to give glare free light complete all as specified and directed.

M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 32x6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc including dismantling old unsv earthing any type complete all as specified and directed.

S&F in repair ceiling fan 5 star rating (Opal white) Energy saving BLDC Fan, Remote controlled, economy range high speed having full copper motor & ribbed alluminium blades for higher air delivery, power coating provides longer life complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified and directed. Note: Old unsv item shall be submitted to MES store yard

S&F ceiling fan 5 star rating (Opal white) Energy saving BLDC Fan, Remote controlled, economy range high speed having full copper motor & ribbed alluminium blades for higher air delivery, power coating provides longer life complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arragement to hanging of fan to ceiling with proper hook nut bolts complete all as specified and directed.

S&F in repair submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLSH type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- New conduit of suitable size with connected fitting will be laid if there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes including making good to disturbed surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S&F loadline DB 8 way TPN 120 amp double door made of metalic steel and having provision of 200 amp bus bar to mount tPN of 120 amp as incommer and SP MCB or TP MCB as out comer complete all as specified and directed. Note: rate of MCCB deemed to be included in the quoted rate

Supply, installation, testing and commissioning of Inverter type Split Air-conditioner Hi wall Model of cooling capacity 2.0 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc suitable for working on single phase 230V,50Hz power supply etc. complete in all respect complete all as specified and directed. Make: Bluestar/ Hitachi/ DAIKIN

R S CONSTRUCTION CO. (BID ID -3098822)

Ex Serviceman Enterprises (BID ID -3098701)

BEHAL TRADERS (BID ID -3099533)

sony engineering works (BID ID -3115155)

M/S Sunil Steel Works (BID ID -3115422)

Tanveer Associates (BID ID -3100158)