Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC 212 B 8 PARDEWANPUR LAL BANGLA KANPUR 208007 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208007 | ₹39.0 L Quoted ₹40.5 L | L1 | Accepted-AOC AOC |
| 2 | L2₹41.6 LRejected-Finance MEGHDOOT HOTTEL MALL ROAD RANIKHET UTTARAKHAND | ₹41.6 L | L2 | Rejected-Finance HIGHER THAN L1 BIDDER |
| 3 | L3₹41.7 LRejected-Finance 0 | ₹41.7 L | L3 | Rejected-Finance HIGHER THAN L1 BIDDER |
| 4 | L4₹43.9 LRejected-Finance 11 82 GROUND FLOOR BLOCK 11 KALYAN PURI EAST DELHI DELHI 110091 UDYAM DL 02 0083384 | EAST DELHI | DELHI | 110091 | ₹43.9 L | L4 | Rejected-Finance HIGHER THAN L1 BIDDER |
| Sl No | Description | Qty | Unit | Bharat Sales Corporation L4 | A S ENTERPRISES L3 | santosh electronics L1 | R N KHARWAR & SONS L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays and for rerouting of cables complete all as specified and directed. | 181 | Cum | 120 ₹21,720 | 110 ₹19,910 | 130 ₹23,530 | 109 ₹19,729 |
| 2.00 | Returning filling, including spreading, leveling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed. | 143.8 | Cum | 40 ₹5,752 | 35 ₹5,033 | 60 ₹8,628 | 34 ₹4,889.20 |
| 3.00 | Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. | 51.52 | Cum | 30 ₹1,545.55 | 20 ₹1,030.37 | 50 ₹2,575.91 | 19 ₹978.85 |
| 4.00 | M&L for Sub class ‘B’ bricks old size laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed. | 1.47 | Per thousand nos | 4,000 ₹5,878.26 | 3,000 ₹4,408.70 | 4,000 ₹5,878.26 | 2,999 ₹4,407.23 |
| 5.00 | M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying stretching and testing the cable complete all as specified and directed.
Note:- Punned thickness shall be measured and paid. | 10.65 | Cum | 350 ₹3,726.45 | 475 ₹5,057.32 | 400 ₹4,258.80 | 474 ₹5,046.68 |
| 6.00 | M&L for Boring/ drilling manully of holes under road, pavement, hard standing or by trenchless technology using ultra sounding technique and necessary machine/ tools upto 100 dia complete all as specified and directed. | 12 | RM | 220 ₹2,640 | 295 ₹3,540 | 500 ₹6,000 | 299 ₹3,588 |
| 7.00 | Supply and Lay in replacment cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100V grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed. | 500 | RM | 170 ₹85,000 | 190 ₹95,000 | 150 ₹75,000 | 189 ₹94,500 |
| 8.00 | All as per item No. 07 above but of size 25 Sqmm 3.5 core complete all as specified and directed. | 500 | RM | 190 ₹95,000 | 210 ₹1.1 L | 175 ₹87,500 | 209 ₹1.0 L |
| 9.00 | All as per item No. 07 above but of size 35 Sqmm 3.5 core complete all as specified and directed. | 500 | RM | 245 ₹1.2 L | 240 ₹1.2 L | 195 ₹97,500 | 239 ₹1.2 L |
| 10.00 | All as per item No. 07 above but of size 50 Sqmm 3.5 core complete all as specified and directed. | 530 | RM | 340 ₹1.8 L | 310 ₹1.6 L | 270 ₹1.4 L | 309 ₹1.6 L |
Updated dates
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
9 Jan 2026, 6:00 pmClosed
LT COL VISHAL BHURIA
GE I Kanpur Cariappa Road Cantt Kanpur 208004
REPAIR/MAINT OF LT CABLE DISTRIBUTION NETWORKS AND LT PANELS AND APFC PANELS ALONGWITH ALLIED SERVICES AT COD INSIDE AND OUTSIDE UNDER GE (I) KANPUR
2025_MES_744272_1
GE(I)/KAN/T-89 OF 2025-26
Open Tender
Electrical and Maintenance Works
180 days
KANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I) KANPUR
₹90,000
Yes
7 May 2026
12 Dec 2025
16 Jan 2026
12 Dec 2025
9 Jan 2026
26 Dec 2025
Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays and for rerouting of cables complete all as specified and directed.
Mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spiraly for hooing for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified & directed.
Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for Sub class ‘B’ bricks old size laid dry flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.
Supply and fix, laying flexible 2.5 sqmm 3 core round copper cable for service connection of street lights within a GI pole inculding termination with thimbles complete all as specified and directed.
Supply and Lay in replacment cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100V grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed.
All as per item No. 07 above but of size 25 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 07 above but of size 35 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 07 above but of size 50 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 07 above but of size 70 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 07 above but of size 95 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 07 above but of size 120 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 07 above but of size 185 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 07 above but of size 240 Sqmm 3.5 core complete all as specified and directed.
Supply and fixing of HDPE double wall corrugated (DWC) electric pipes of size 40 mm dia of 6 mtrs length each, manufactured using HDPE polymer having a smooth/plain internal surface & currugated external surface having with greater stiffness withstand soil movement & take higher loads (static & dynamic) incuding connecting rings made of HDPE DWC suitable for 40 mm pipes, to pass through LT cable complete all as specified and directed. Make Astral/ SFMC/ KPT
All as per item No 16 above but of size 50 mm dia complete all as specified and directed.
All as per item No 16 above but of size 63 mm dia complete all as specified and directed.
All as per item No 16 above but of size 75 mm dia complete all as specified and directed.
Supply and laying RCC cable route indicator rectangular in shape providing cured shape on top, dimension not less then 250x150 mm at bottom below GL, 200x150 mm above GL & total height not less than 1250 mm fabricated in cement concrete (1:2:4) coloured yellow & mentioning cable size/ voltage & location in black colour, has to be engraved complete all as specified and directed.
Supply and fixing in replacement of off load change over switch in sheet metal enclosure 4 poles, 200 Amp rated, 440 volts, 50 Hzs, confirming to IEC 60947-3, IS/IEC 60947-3 alongwith extendable handle with making all connection and fixing accessories on surface of wall/panel operating handle etc complete all as specified and directed.
Supply , installation, testing and commissioning of power factor improvement panel of capacity 125 KVAR size of panel 1175 mm x 800 mm x 540 mm, fully type test according to IEC 61921 including interconnection with LT panel with appropriate size of electric cable for Main panel, factory made, weather proof , dust and vermin proof (IP 65) suitable for Humidity: up to 95%,Average daily temperature: +35°C max, Ambient temperature: -5°C to 45°C, 1100 V/660 V grade 3 phase 50 HZ AC supply floor mounted , fabricated out of 14 SWG MS sheet welded on 40 x 40 x 3 mm angle iron frame / base of appropriate size and having four Nos angle iron legs made out of 40 x 40 x 6mm 60 cm long angle iron below frame with front door and back opening having locking arrangement prewired with copper conductor PVC insulated flexible wire size 1.5 sq mm / extension strips and connected with suitable size thimbles , lugs duly painted with grey epoxy powder coating after suitable chemical treatment , legs duly embedded in ground in PCC 1:3:6 of suitable size including locking arrangement suitable for mounting , with required sheet metal enclosures, thimbles , all as specified and directed by Engr-in-Charge and all other electric incoming and outgoing connections with PVC insulated multi stranded flexible copper NYVIN cable of suitable size and PVC flexible conduit medium quality as required , comprising of the following:-
S&F in repair MCCB 3 pole 415V, Adjustable thermal and fixed magnetic type of capacity 250 Amps with breaking capacity 25 KA, complete all as specified and directed. Make:- Havells Cat Part No - IHLLSEB30250 or L&T/K Cat Part No - CM90638OOPO or Indoasian Cat Part No - 840102.
Supply, install, testing and commissioning LT cubical Panel of outdoor type factory made dust/vermin proof made out of CRCA sheet 3.15 mm thick CPRI approved duly powder coated having opening and locking arrangement both in front and rear side(independent door for each item on front side) mounted on 4 Nos angle iron 50x50x6 mm, 60 cm long embedded in PCC 1:3:6 type C2 with aluminium bus bar of rating 1.5 times of incomer MCCB rated capacity, IP 65 protection, provision of holes at the bottom of panel to pass through cable with cable gland for incomming and outgoing cables with lugs and connections, sealed completely to avoid foreign particals entry into the panel,etc required nuts ,bolts and washer incl provision of lugs for cable termination of 16 to 240 sqmm cable in MCCBs 63 to 630 amps & control wiring with suitable size PVC copper conductor cable etc. Including provision of following accessories/eqpt incl cable gland etc and suitable for fixing of under mentioned items:-
Supply and installation, connecting eclectically & commissioning in replacement of LT feeder pillar box outdoor type of suitable size,factory fabricated made out of MS sheet of thickness 3.15 mm front door openable with locking arrangement mounted on angle iron legs made out of angle iron of size 40x40x6mm, 1.5 mtr long, 1.0 mtr above ground level and 0.50 mtr embedded in PCC blocks of suitable size,duly painted with two coats of synthetic enamel paint over and including a coat of red oxide with 300 amps rated aluminium bus bar suitable for 3 phase 4 wire supply system duly drilled holes and making all cable connection with proper thimbles mounted on epoxy based post insulators and one MCCB 200 Amps 4 pole 415 Volt, 35/36 kA of make : Legrand/ Schneider/Havells/L&T complete all as required at site.
All as per item No 98 above but size 16 sqmm complete all as specified and directed.
Supply and fixing acrylic sheet board 5 mm thickness size 1000 mm x 600 mm on which lay out of installation equipment (computerised Sketch) of electric supply. Distribution of Cable detail marked with different colour including all fixing accessories complete all as specified and directed.
Removal of unwanted vegetation/bushes/small plants shrubs around the water/electric supply installations/ inside the valve pit and surface excavation not esceeding 15 cm depth leveling the ground and removing the excavated material to a distance exceeding 50 M complete all as specified and directed. Note - (1) Tools including Cutting, Digging, grass/ bush cutting machine including fuel & oil has to be provided by contractor with mechine operator & labour.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart, one twin core cable flat or circular of size 10 Sqmm stranded conductor complete all as specified and directed. (Make - Havells/Plaza/Finolex/Kalinga)
Supply and fix bus bar chambers 300 mm long iron clad with 4 Nos 200 Amp rated copper strips complete fixed flush wall and making good the disturbed wall surfaces all as a required at site complete all as specified and directed.
Supply and fix bus bar chambers 300 mm long iron clad with 4 Nos 100 Amp rated copper strips complete fixed flush wall and making good the disturbed wall surfaces all as a required at site complete all as specified and directed.
M&L Painting to existing steel four pole structure of 09 mtr height including mild steel work like cross arms, clamps, pipe channel, bracing etc after cleaning and prepration of surfaces painting externally above painting depth with one coat of aluminum paint over and including a coat of aluminum primer including preparation of existing surfaces and marking pole numbers in 15 cm dia with approved colour in circular and making 03 Numbers & 02 Numbers of bands & strips with 30 cm wide fluorescent paint from bottom of pole to 1.5 mtr height of pole complete all as specified and as directed. Note : Cutting of bushes & tree branches upto 3 Mtrs height of pole shall be deemed included in quoted unit rate.
Material & Labour in replacement of copper wire for control circuit in capacitor bank of size 2 core 2.5 sqmm 1100 volts grade complete all as specified
and directed.
Supply and fixing glow sign board (box type) of size 1500 mm x 600 mm x 150 mm cladding PGI sheet 18 gauge fixed on aluminium angle of size 25 mm x 25 mm x 3 mm on top/bottom both side and transparant acrylic both side and transfrant acrylic sheet 3.00 mm thick in front in which writing with arial black and provision of 3 Nos LED fitting 20 watt for illuminate the board suitable fixing/haning arrangement complete all as specified and directed.
Supply and fix of 1 mtr long hot dip galvanized siongle arm standard bracket made up of 40 NB dia GI pipe suitable to mount on pole having top 70 mm A/F complete all as specified and directed.
M&L for repair & welding of LT feeder pillar box / APFC panel front / rear door and locking arrangement with lock & key including minor parts such as hinges, screw, nuts & bolts, gaskets etc including paint patch work making good as per existing colour and complete all as specified and directed.
Dismantling steel poles struts, and supply & erection of 9.00 mtrs high galvanized octagonal pole with bottom 155 mm A/F, top 70mm A/F made up of 3mm thick HT plate along with 250mm x 250mm x 16mm base plate and foundation bolts 04 Nos of M24 X 750 long 'J' type EN 8 grade foundation bolts along with template, galvanised uniformally inside and outside by means of hot dip mothed, steel material grade must be as per BS-EN10025/IS 2026 and having silicon content not more than 0.6% complete all as specified and directed. Note :- Conditions for octagonal poles & its manufacturing (a) Manufacturer must have hot dip galvanisation facility in their plant with minimum 13 mtrs long galvanizing tank. (b) Raw material (steel) grade must be as per BS-En10025/IS 2062 and having silicon content not more than 0.6% & bidder has to submit raw material test certificate from OEM. (c) Manufacturer must have CNC controlled plasma sheet cutting and bending machine & fully automated submerged arc welding machine at OEM for perfect single longitudinal weiding of shaft. (d) Should be of make in india & have to submit registration certificate. (e) Pole manufacturer must have organised factory with ISO 9001, ISO 14001 and ISO 45001 certified. (f) Structural calculation of pole must be as per IS -875 Part-III
Supply and fixing of 1 mtr long hot dip galvanized double arm standard bracket made up of 40 NB dia GI pipe suitable to mount on pole having top 70 mm A/F complete all as specified and directed.
Supply and fix electric stud connector 4 way (RYB&N) with proper colour coding & threaded nobs to tight the cable thimbles, fixed over a hylem sheet or any other elecrically insulated plates with provision of fixing arrangment for MCB SPN 2 way fixed inside GI octoganal pole, including providing good termination to AL cable and copper wire with timbles complete all as specified and directed.
M&L for cement concrete 1:4:8 type C-2 (using 40 mm grade stone aggregates) in foundation, filling and mass concrete including sub base of floors complete all as specified & directed.
Mild steel TMT bars 12 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & directed.
M&L for Reinforced cement concrete nominal mix (using B1 1:2:4 20 mm graded stone aggregates) as in columns, pillars, posts & stuts complete all as specified & directed.
Mild steel TMT bars 8 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spiraly for hooing for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete al
l as specified & directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TenderdocumentsT89.pdf
Tender Documents • 1.00 MB
BOQ_833397.xls
BOQ • 0.88 MB
Download all tender documents and submit your bid