Providing ceramic tile inside the inbuilt cupboards and replacement of damaged cupboard door shutters with PVC integral free foam sheet for the various flats under TTM-II and other locations at Anushaktinagar, Mumbai.

Amount

GENERAL ABSTRACT

PART-A

PART-B

Description of Work / Item(s)

Amount

PART- A

Cement plastering 15 mm thick using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with POP over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s. Anuvi Chemicals, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc including scaffolding, curing and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by EIC.

Repainting of old painted surfaces with two coats of synthetic oil bound distemper (on already prepared surface/ old similar painted surface) of Tractor brand of M/s. Asian/Bison Acrylic Distemper of M/s. Berger/Beauty O B D of M/s. Nerolac/Maxilite Acrylic Distemper of M/s. ICI or other approved quivalent make of approved shade/ colour, with/without one coat of approved cement primer, including covering the furniture etc with tarpaulins or eqivalent covering materials before applying, scaffolding, removal of splashing & droppings from floors, doors & windows, cleaning the surfaces etc. complete all as per specifications and as directed by the Engineer-in-Charge.

a) Two coats of synthetic oil bound distemper over one coat of approved cement primer

Pressure grouting through RCC slab, walls / brick masonry by drilling hole in RCC slab to required depth without causing any damaged to reinforcement, inserting ½” dia PVC pipe in hole securing the hole sides with mortar 1:2, pressure grouting with cement slurry mixed with approved water proofing compound @ 2% by weight of cement to required pressure, continuing the pressure grouting till the flow of cement slurry stops, removing the PVC pipe, sealing the hole with cement mortar 1:1, scaffolding and disposal of debris at disgnated place within DAE premises etc complete all as per specifications, & as directed by Engineer-in-Charge.

Repairs to the structural members concrete surface / concrete finish using acrylic polymer comprising of following operations:- i) Breaking cracked / spalled concrete members along the cracks and transporting & disposing / stacking off the debris as directed by the Engineer-in-Charge. ii) Exposing and cleaning the reinforcement bars thoroughly by light tapping, wire brushing, emery paper & finally by chemicals. iii) Applying protective coat of polymer and cement slurry in the ratio 1:1 by volume to reinforcement bars. NOTE: acrylic polymer liquid required will be paid under item No.3 (a).

a) Building up with polymer modified cermentatious mortar for beams, columns etc. in layers not exceeding 20 mm (proportion cement 50 Kgs. : Silica + 125 Kg. of silica sand : acrylic polymer liquid 10 Ltrs. with necessary bond coats (polymer : cement = 1:1 by volume) for the tack coat and also for subsequent layers using acrylic polymer approved by the department including curing, scaffolding and steel props for supporting structural memberi) Breaking cracked / spalled concrete members along the cracks and disposal of debris at disgnated place within DAE premises etc complete all as per specifications, & as directed by Engineer-in-Charge.

Providing & laying at all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or euqivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including of cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc. and including removing existing flooring / dado and disposing of debris complete all as per specifications, relevent IS code & as directed by the Engineer-in-Charge.

a) In dado with tiles of 300 X 450mm( approx size) similar to combination of Infinity aqua/ red/ Beach and infinity white of Higlihter series of M/s H&R johnson (India) Limited) fixed over 12 mm thick using 1:4 ready mix cement mortar backing , jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado) Breaking cracked / spalled concrete members along the cracks and transporting & disposing / stacking off the debris as directed by the Engineer-in-Charge..

Supplying & fixing 18 mm thick PVC integral free foam sheet in form of flush finish cupboard shelves/frames for fixing of cupboard shutters, manufactured by M/s. Jain Irrigation Systems Ltd. (Excel sheet) of approved colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including using same material batten patti of 18 mm thick for fixing of shelves with SS Screw, required for all fixing arrangement etc. , all edges to be smooth finish with mixture of PVC powder & solvent etc including removing the old damaged wooden shelves/shutter and transporting to Deptt. stores etc. complete all as per specification,drawings and as directed by the Engineer in Charge. Note:- 1) The entire shelves shall be jointless shutter.

For Cupboard Shelves of approx size of 1200 mm x 750 mm

Supplying & fixing 18 mm thick PVC integral free foam sheet in form of flush finish for double leaf cuboard shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) of approved colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides all edges to be smooth finish with mixture of PVC powder & solvent etc. including dismantling the existing plywood/ A.C sheet shutters/MS shutters/removing the old damaged wooden shelves/shutter and transporting to Deptt. stores etc. complete all as per specification,drawings and as directed by the Engineer- in- Charge.

18 mm thick double leaf cupboard shutter including necessary rebate.

Cupboard frame of 36*75mm size(using 2*18mm thk PVC excel sheet) with suitable rebate and fixed using SS screws and suitble approved adhesives.

Supplying & fixing heavy duty stainless steel superior quality fittings, fixtures and fastenings along with necessary SS screws, bolts, nuts, washers, etc. as per approved samples. complete all as per specifications and as directed by Engineer- in- Charge.

a) Heavy duty SS 304 Piano hinges 19 mm x 20 Gauge.

Supplying & fixing matt finished, anodised aluminium heavy quality fittings, fixtures and fastenings of approved quality, along with CP brass screws, bolts and other accessories as per approved samples etc. complete all as per specifications and as directed by Engineer- in- Charge.

a) Tower bolt 150 mm long with 10 mm dia. barrel.

b) Bow Handle 100 mm long 10 mm dia. Solid.

c) Heavy duty Harsp stable 150 mm long(For locking arrengement)

d) Magnetic catch

Removing & Refixing of existing cupboard door shutter with frame including fixing of necessary arrangement like nailing, screwing etc.inclusive Reparing/ change of any broken wooden batton with existing matching, filling with putty and painting of two coats synthetic enamel paint of approved make including all the fixing arrangement as specification & as directed by EIC

Supplying, fabricating and fixing in position at all floors anodized Aluminium of approved sections with size and wights as directed (including wastages if any)for fixing the partition Shelves of Cupboard confirming to relevant IS specifications with all approved all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing support and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC.

Providing and fixing in position at all floors, levels/ heights 18mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length/ height of approved shade, finished sizes as directed including machine cut/ hand cut, final cleaning, moulding and polishing of all exposed edges, in line, level, plumb and fixing the stone with ready mix cement mortar 1:3, 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, providing 75mm long SS screw minimum @600mm c/c including removing existing door frame/window frame, shutter & fittings etc. and depositing the same at dept. store etc. complete all as per specifications, drawings & as directed by the Engineer- in- Charge.

a) Baroda Green marble

Description of Work / Item(s)

Amount

PART- B Rebate Items

Rebate for taking away old dismantled materials.

a) Old wooden frames, old plywood sheet of various sizes.

b) old plywood sheet of various size

Om Enterprises

AMBIKA ENTERPRISE

M/s SRV Construction Co.

ANUBHAV ENGINEERING COMPANY

ANS Constructions.com

Om Enterprises

AMBIKA ENTERPRISE

M/s SRV Construction Co.

ANUBHAV ENGINEERING COMPANY

ANS Constructions.com

M/s SRV Construction Co.

ANUBHAV ENGINEERING COMPANY

Three Star Construction CO.

AMBIKA ENTERPRISE

Om Enterprises