Attending repairs to 2 Nos 50 T dump barges belongs to Port department at Kalpeni.

Amount

SHEDULE – 1 (50 T DUMP BARGE – I) Cutting and removing the complete damaged/rusted portion of deck plate, towing post etc., of 50 T dump barge belongs to Port department by gas cutting and making the structure surface perfectly in level to facilitate fabrication of new steel structural & MS Plate without any deviating in original alignment and design, stacking the cut and removed steel materials within the lead of 50 mtr as directed by EIC, including cost of all labour charges, cost of minor tools, cost of all materials required, transportation charges of all materials to work site etc., complete.

Fabrication, errection and assembling of steel structural by cutting / removing as well as by addition to the structure to strengthen existing structures with various size of MS plates, Angles and other steel structures by using are welding with 4 mm / 3.15 mm advani orelikon over coated electrodes and gas welding as per the direction of EIC, including running expenses of welding gen set, cost of all labour charges, minor tools, cost of electrodes gas cylinders, transportation charges of all materials to work site, cost of steel structural and plates etc., complete.

Chipping, Scrapping and cleaning the old steel surface with chipping hammer, scrapper etc., and cleaning with wire brush and cotton waste etc., as directed by the engineer in charge including cost of all labour charge, brush, cotton waste, minor tools etc., complete.

Painting the cleaned surface of the crafts with one coat of approved marine quality primer paint / marine quality epoxy primer and painting two coats of marine quality enamel colour paints over the primer coat as directed by the Engineer in charge including cost of all labour charge, cost of primer paint, SE Paint, thinner, painting brush, minor tools etc., complete.

Supply and fixing of anodes of Zinc alloy ( IS code 8062 (Part IV) -1979 of size 3.5" x 1.5''x 12'' with four legs in a zigzag manner over the outer submerged surface of Mooring buoy to have cathodic protection to the mooring buoy against the corrosion . The rate is inclusive the cost of anodes, labour charges and consumable items required for its fitment etc complete.

Providing all Old truck tyre as fender in the side of a-Frame fitted Dumb barge with G.I Chain & D Shackle etc., as directed by the Engineer in charge, including cost of all labour charges cost of materials like, old truck tyre G.I Chain & D shakle etc.

SHEDULE – 2 (50 T DUMP BARGE – II) Chipping, Scrapping and cleaning the old steel surface with chipping hammer, scrapper etc., and cleaning with wire brush and cotton waste etc., as directed by the engineer in charge including cost of all labour charge, painting brush, cotton waste, minor tools etc., complete.

Painting the cleaned surface of the crafts with one coat of approved marine quality primer paint / marine quality epoxy primer and painting two coats of marine quality enamel colour paints over the primer coat as directed by the Engineer in charge including cost of all labour charge, cost of primer paint, SE paint, thinner, painting brush, minor tools etc., complete.

Supply and fixing of anodes of Zinc alloy ( IS code 8062 (Part IV) -1979 of size 3.5" x 1.5''x 12'' with four legs in a zigzag manner over the outer submerged surface of Mooring buoy to have cathodic protection to the mooring buoy against the corrosion . The rate is inclusive the cost of anodes, labour charges and consumable items required for its fitment etc complete.( Port Blair data)

Providing all Old truck tyre as a fender in the side of a-Frame fitted Dumb barge with G.I Chain & D Shackle etc., as directed by the Engineer in charge, including cost of all labour charges cost of materials like, old truck tyre G.I Chain & D shakle etc.

KALAVI CONTRACTOR (BID ID -3041126)