SPECIAL REPAIR TO ROAD AND ROAD FURNITURE SURFACE AND SURFACE TREATMENT OF MAIN APPROACH ROAD WITH LIGHTING SYSTEM TECHNICAL AREA AT DMSRDE KANPUR UNDER GE (I) RND KANPUR

Amount

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc., complete all as specified and directed.

M & L for applying evenly a priming/ tack coat with bituminous primer @ 5 Kg/ 10 Sqm using paving bitumen VG-10 complete all as specified and directed.

M & L for bituminous premix asphaltic semi dense asphaltic concrete 30mm consolidated thickness with 5.5% (min.) binder content of VG-30 by weight of total mix, prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity laid by mechanical paver, rolled and compacted to required camber and gradient complete all as specified and directed.

M&L for providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity complete as per specifications and directions of Engineer-in-Charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material outside of MoD land complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete, sub base, floor complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in roof kerbs or mud stop, round or chamfered edge, copping etc complete all as specified and directed.

M&L for 80mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. Complete all as specified and directed.

S&F 100 x 100 x 25 mm road stud/cat eye made of aluminium moulded two No's reflectors in red / yellow / white fixed on two sides for maximum retro reflection of approved make complete all as specified and directed. (Make : DARK EYE/APEX / ALCOLITE / AVERY DENNISON).

Supply and fix post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed complete all as specified and directed. (Make : DARK EYE / ALCOLITE / AVERY DENNISON).

M&L for 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. complete all as specified and directed.

M&L for repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm (bitumen of grade VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete all as specified and directed.

M&L for applying one or more coat Painting with synthetic enamel paint on old concrete / kerb stone surfaces of approved brand and manufacture of required colour to give an even shade complete all as specified and directed.

Supply and Erection of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) including Cement Concrete Type-C2 1:3:6 (Using 40 mm graded stone aggregate in foundation including excavation, returning filling in and removal of surplus soil etc complete all as specified and directed.

Supply and fixing LED street light fitting 120 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in replacement of LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core complete all as specified and directed.

Excavation in trenches in soft/loose soil. n. exc 1.5m wide and not exc. 1.5m in depth, for foundation etc. or shafts, well, cesspits manholes, pier holes, cable trenches, etc, n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

Supplying and filling in plinth with sand under floors including well ramming, consolidating and dressing for cable cushioning complete all as specified and as directed. Note:- Punned thickness shall be measured for payment.

M&L for sub class 'B' bricks old size laid dry flat over the cable abutting each other complete all as specified and directed.

M&L for GI tubing "light grade" 40mm dia complete with GI fittings for cable protection complete all as specified and directed.

S&F junction box of size 350mmx250mmx138mm made out of poly carbonate IP-65 protection with poly Ethelene gasket and glow wire tested at 90 degree Celsius as per IEC 60695-2-11 and thermoplastic gland of suitable size fixed on poles with galvanised clamps of F1. 40x5mm made to shape fixed with nut bolts washers etc. Product No. GSMB 3425 of make sintex or equivalent of KDM/RMW complete all as specified and directed with following fitments. (a) Aluminium bus bar 3 pole of 100 Amps capacity fixed on porcelain insulators and insulated with colour sleeves (04 Nos) and connect suitable for 10 Sqmm to 25 Sqmm cable. (b) MCB SP 10 KA of 'C' series capacity 6 Amps -01 Nos (c) Neutral Link-01 No.

Supply, laying , connecting and testing of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm drawing through pole for connection of street light complete all as specified and directed.

SHYAMA CONSTRUCTION COMPANY

BHARAT ASSOCIATES PVT LTD

Z N Enterprises

M/s R.V. Constructions

GUPTA ENGINEERING WORKS