PROVN OF PREFAB SHELTER FOR OFFICE ACCN AT GE (P) AF LEH

Amount

PART-I B/R WORKS Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and not exceeding 10Sqm on plan and getting out in any type of soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.

Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Excavation over area not exceeding 1.5m deep and getting out in any type of soil , complete all as specified and directed.

Spreading and levelling in layers n exc. 25 cm thick each using available soil from excavation, complete all as specified and directed.

Material and labour, Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

Use and waste of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished, complete all as specified and directed.

Use and waste of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, complete all as specified and directed.

Use and waste of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete, square, complete all as specified and directed.

Use and waste of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) or flat, rough finished, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 10m dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, and mass concrete, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in columns, pillars, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, pre-cast cement concrete block masonry with soild blocks type B1, 1:2:4 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Material and labour, hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

Material and labour, 100mm thick cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, 100mm thick cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in floor/path surface finished even and fair, complete all as specified and directed.

Material and labour, Forming construction joint 30mm deepX 10mm wide filled with sealing compound grade A, complete all as specified and directed.

Supply & Fixing for HDF based laminated wooden flooring of planks of size 1.20mx 0.198x 8mm thick non glue laminated flooring including 0.60mm PE poly moisture foam as in underlay barrier of over lapping 20 cm fix them with adhesive tape,boarding fixing floating manner based tongue and groove interlocking arrangement complete all as specified and directed. Note;- Colour and design as approved by GE

Material and labour,for machine pressed precast concrete interlocking paver block any shape and size confirming to IS: 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment fixed over and including 50mm thick sand cushioning , complete all as specified and directed.

Material and labour, first quality non-skid coloured ceramic tiles 7 - 8mm thick, size 400mmx400mm, in floors etc. set and jointed in neat cement slurry @ 3kg/sqm over and including 20mm thick screed bed/bedding layer in cement mortar (1:4), and pointed in white cement mixed with pigment or coloured cement to match, complete all as specified and directed.

Material and labour, rendering 15mm thick plaster in cement mortar (1:4), on block masonry/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, rendering 15mm thick plaster in cement mortar (1:4), on block masonry surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt , complete all as specified and directed.

Material and labour,preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed

Supply and fix, GI tubing 15mm bore medium grade with necessary GI fittings and fixed complete to wall, or laid under floors, or fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc, complete all as specified and directed.

Supply and fix, GI tubing 20 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc or laid in floors complete all as specified and directed.

Supply and fixing, Vitreous China wash down water closet pan (pedestal pattern) white(excluding fixing bolts,) incl 10 ltrs capacity, PVC valveless, symphonic type flushing cistern, Iow level, white, with inlet, ball valve, float and handie including brackets and provision of Flush or high density or PVC ,32mm dia for low level cistern pipe of polythene complete all as specified and directed.

Supply and fixing, vitreous china urinals, flat back type, size of 465 X 355 X 265 mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement morter 1:2, securing urinal to plug with and including 60 mm long brass screws pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed

Supply and fixing, Vitreous china wash basin, white,fiat back, size 630 X 450 mm including brackets with cutting and pinning in ends of brackets or erecting stand including PVC waste pipe 32 mm dia,complete all as specified and directed.

Supply and fix, fancy type Pillar tap, cast copper alloy, chromium plated, with capstan head, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm dia bore, complete all as specified and directed.

Supply & fix, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, complete all as specified and directed.

Supply and fix, bib taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, complete all as specified and directed.

Supply and fix, stop valves, fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore iron pipe or for brass ferrulee complete all as specified and directed.

Supply and fix, brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges with and including screws complete all as specified and directed.

Supply and fix, Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Supply and fix, Gun Metal gate valve with iron wheel head, screwed both ends for 25mm dia bore pipe, including cutting of pipes and insertion of union, (ISI marked & of specfied make), including taking down old and removal, complete all as specified and directed.

Supply and fix, Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx420mm with bowl size 410mmx330mmx160mm, with and including PVC waste pipe and CP waste coupling 32 mm, complete all as specified directed.

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500litres capacity ‘triple layered’, white colour with screwable lid, hoisted and fixed in position including inlet, outlet and drain pipe with plug, ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete all as specified and directed.

Design , supply , fabrication and erection of PEB steel structure of size as shown on drawings considering and including the following details/ requirements :- a). Size of PEB including Toilets will be as shown on drawings. b). Indicative structural details of PEB including toilets are mentioned in indicative drawing uploaded with the tender. (In this regard pls refer Particular Specification). Foundation shall be designed by the tenderer and quoted rate is deemed to include the same (Design Cost). All the items i.e. structural steel work, bolts, base plate, connections, and erection are deemed to be included in the quoted rate for this item. Quoted rate is also deemed to include necessary vetting of PEB Structure duly signed and stamped from any IIT/NIT of the structural drawing prepared by the tenderer. c). Wall- S&F Sandwich puff panel 80 mm manufactured in Continues Production Line using prepainted galvanised sheet of approved colour density: 40 kg. Outer and inner sheet thickness: 0.50mm colour coating Rmp Yield Strength: 240 Mpa Coating Mass: 120 GSM width 1.12m. d). False Ceiling– S&F sandwich puff panel 40 mm manufactured in continuous Production Line using pre-painted galvanized sheet of approved colour of density 40 kg. Top and bottom sheet thickness : 0.40mm colour coating Rmp Yield Strength : 240 Mpa Coating Mass : 120 GSM Width : 1.12m complete all as specified. e). Details of powder coated aluminum doors, windows and ventilators will be provided (S&F) as per TD drawing and as specified. Toilet doors (frame and shutter) will be of PVC all as specified. f). Roofing- Supplying and fixing of roof will be constitution of Metallic color coated profiled galvanisedsheets 0.6mm thick duly secured using and further sealed with silicone rubber for further added water protection for extra safety from leakage. g). Aluminum Frame with Sheeting for Verandah Covering:Supply and fix anodized aluminum section of weight not less than 0.753 Kg per m medium weight and 3mm thick polycarbonate sheet with height of 8 feet in front verandah.

Material and labour, 150mm salt glazed stone ware (drain pipe) laid in trenches and jointed in cement mortar 1:2, complete all as specified & directed.

Material and labour, concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) type C-2, size of pipe 150mm dia bore, complete all as specified and directed.

Material and labour, Plain Cement Concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

Material and labour, walling of random rubble stone masonry built in cement mortar 1:4 brought upto course, well bonded, bedded and solidly hearted , complete all as specified and directed.

Material and labour, pre-cast cement concrete block masonry with soild blocks type C-1, 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Material and labour, pre-cast cement concrete block masonry with soild blocks type C-1, 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 as in honey-combing complete all as specified and directed.

Supply and fix,Conventional LLDPE septic tank for 25 users designed to carry sewage and sullage water, including earth work in any type of soil, PCC !:3:6 in foundation, Vent shaft, and necessary fixing arrangement complete all as specified and directed.

Material and labour, plain cement concrete (1:2:4 ) type B-2 using 40mm graded crushed / broken stone aggregate as in filling, complete all as specified and directed.

Material and labour,loose filling of broken stone boulder gauge exc 80mm but not exceeding 150mm as in soakage well/pit complete all as specified and directed.

Material and labour, Cast iron work FG 150, , unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles iron work complete all as specified and directed.

Supply & Fixing, aluminum anodized section powder coated of approved colour as in frame work such as doors/window frame or /ventilator, partition etc including jointing cleats, steel screws, dash fasteners, rawl plug and fixing in position with screws in wall or floor etc complete all as specified and directed. (Note:sheet glass and PVC Sheet shall be measured and paid separately under respective items)

Suppy & Fixing 9 mm thick veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on both faces; fixed with screws/ beading to aluminum frame work, colour as approved by Engineer in Charge complete all as specified and directed.

Supply & Fixing, 6 mm thick sheet glass ordinary quality, fixed with aluminum beading/clips, rubber gaskets etc, as in partition in (square/rectangular) exceeding 0.50 Sqm in each pane complete all as specified and directed.

PART-II E/M WORKS Material and labour, point wiring complete with two single core multi stranded Copper conductor size 1.5Sqmm (nominal area) FRLS PVC insulated unsheathed 1100volts grade colour code cable, drawn in and including non metalic rigid PVC casing capping of suitable size including all standard fittings such as Tee junction, bends etc, casing capping fixed on wall & fixed on ceiling including M.S. sunken boxes of suitable size made of 1.6mm thick sheet duly epoxy painted with anti-corrosive treatment, for housing switches, sockets etc, PVC cover sheet 3mm thick (Make : Hylam, Plaza, Havells, Kalinga) including one 1.5Sqmm size (nominal area) multi stranded copper conductor FRLS PVC insulated unsheathed colour code cable for earth continuity, for one light/exhaust fan/bell point or fan point (through regulator), controlled by one switch, complete all as specified and directed.

All as per Serial item No. 60 here-in-before but for 5 amp socket outlet on the same board.

All as per Serial item No. 60 here-in-before but for 5 amp independent socket outlet.

All as per Serial item No. 60 here-in-before but for 15 amp independent socket outlet using 2.5 sqmm single core wire.

Supply and fixing, switch piano, flush type, single pole, one way, 5Amps, complete all as specified and as directed.

Supply and fixing, switch piano, flush type, single pole, one way, 15Amps, complete all as specified and as directed.

Supply and fix, socket outlet, flush type, multipurpose 5 pin (2 in 1), 5Amps, 240volts, complete all as specified and as directed.

Supply and fix, socket outlet, flush type, multipurpose 6 pin (multipin), 5Amps & 15Amps, 240volts, complete all as specified and as directed.

Supply and fixing, bell push ,flush type,single pole 5 amps , complete all as specified and as directed.

Supply and fixing, bell multi music type , complete all as specified and as directed.

Supply and fix, ceiling rose Bakelite white/black coloured of size 25x50mm two to three terminals, complete all as specified and as directed.

S&F for Holder insulated body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

S&F surface /wall mounted LED batten luminaire with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver of capacity LEDs 20 watt 6000K(4 ft) ,IP-65 diffused type with energy saving ,enviormental friendly,long life with three core flexible copper conductor cable of suitable size complete all as per specified and directed Make: Havells Cat Part No LHEXACP7IN1J020 or equivalent in Bajaj/ Wipro/ Cropmton/ Philips.

Material & Labour for LED filament lamp of capacity 7.5 watt, 230 volts, 50Hz decorative surface mounting dome shaped pendant in black finish complete all as specified and directed. Make :Havells CAT Part No. LHFHDPE1TN1K020 or equivalent approved in Bajaj, CG, Wipro

Supply & fixing for 7 watt LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink complete all as directed by Engr-In-charge. Make: Havells Cat part No LHLDEUEEMC8R007 or equivalent in Crompton/ Bajaj/ Philips/ Wipro.

Supply & fixing for Ultra Modern recess mounting luminaire suitable for armstrong/grid/pop ceiling with separate electronic driver and high brightness SMD LEDs of capacity 34 Watt 6000 K ,of size 600mmx600mm with three core flexible copper conductor cable of suitable size complete all as directed by Engr-In-charge.

Supply & fixing for LED light fittings with energy saving new generation of cap 10 watt LED IP-65 Bulkhead luminaires including LED driver holder connecting up to with three core flexible copper conductor cable of suitable size complete all as directed by Engr-In-charge.

S&F for exhaust fan, 300mm sweep with louvers MS body, heavy duty, AC single phase, 230 volts including connection with 0.5 sqmm copper conductor flexible wire & pipe from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting including cutting chases/ wall for making hole suitable for fan, complete all as specified & directed. Make:- Havells (Turbo Force SP) or equivalent of make Orient/ CG / Khaitan

Supply and fix, MCB, SP, 6-32Amps, 240volts, 10KA, 'C' series, complete all as specified and directed.

Supply and fix, MCB, SPN, 32Amps, 240 volts, 10KA, 'C' series, complete all as specified and directed.

Supply and fixing, sheet metal enclosure MCB distribution board. triple pole & neutral 415 volts ,4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link/earth flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification , complete all as specified and as directed

Supply and fixing sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link/earth flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as directed

Supply and fixing triple pole with neutral (TPN) of 415 volts 10 kA "C" curve MCB TPN of cap 63 Amps 415 volts complete all as directed

Material & labour, Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3 Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.

Supply and laying / fixing , GI pipe light grade 50mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, complete all as specified and directed. Note (s) : (i) MS clamps, nuts, bolts etc where required shall be measured and paid separately. (ii) Cutting road etc. shall be measured and paid separately.

Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

M & L for random rubble stone masonry in cement mortar 1:6 as in valve pit of internal size 0.60mx0.60mx0.6m with 50mm thick coping with PCC M-15 type B-0 using 12.5mm grade crushed stone aggregate including excavation and earth work and disposal of surplus soil to a distance not exceeding 50 mtr and depositing all as directed, plastering internal walls with 15mm thick cement mortar 1:6 and flush pointing externally in the same mortar as the work proceeds including 3.15mm thick MS sheet cover with handle & locking arrangement and angle iron frame of size 40x40x6mm including painting with two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed.

Supply and fix, GI tubing 25 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc or laid in floors complete all as specified and directed.

Supply and fix, GI tubing 20 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc or laid in floors complete all as specified and directed.

Supply and fix, Gun Metal gate valve with iron wheel head, screwed both ends for 25mm dia bore pipe, including cutting of pipes and insertion of union, (ISI marked & of specfied make), including taking down old and removal, complete all as specified and directed.

Supply and fix, Gun Metal gate valve with iron wheel head, screwed both ends for 20mm dia bore pipe, including cutting of pipes and insertion of union, (ISI marked & of specfied make), including taking down old and removal, complete all as specified and directed.

Material & labour, for Cutting/screwing of existing steel water tubing for addition screw on pipe to from connector of size 25/32mm dia complete all as specified and directed

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 50Sqmm 3.5core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s): Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately.

Material and labour, sub main wiring with two single core 6Sqmm (nominal area) PVC insulated and unsheathed cables with stranded copper conductor FRLS, drawn in and including non metallic rigid PVC conduit medium duty with all standard accessories including one run of continuous PVC insulated stranded copper conductor FRLS cable 6Sqmm (nominal area) for earth continuity, complete all as specified and directed. Note(s) :- 2runs of 6Sqmm main cable + 01 run of 6Sqmm for earth cable and conduit shall be measured as one unit/one Running Metre.

MS INFRATECH