Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC BHAVANI KRUPA GANDHI CHOWK PULGAON 442302 | WARDHA | MAHARASHTRA | 442302 | L1 | Accepted-AOC Being lowest and quoted rates are reasonable | |
| 2 | L2₹26.6 L+₹1.2 L (4.76%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹27.6 L+₹2.2 L (8.69%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹28.6 L+₹3.2 L (12.7%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹30.5 L+₹5.1 L (20.0%)Rejected-Finance BHAWANI KRUPA GANDHI CHOWK PULGAON | PULGAON | WARDHA | MAHARASHTRA | L5 | Rejected-Finance Being other than lowest |
| Sl No | Description | Qty | Unit | M/s Prakash Agencies L4 | ALI AKBAR MANNAN BOHRA L2 | HUSAIN KHUZEMA BOHRA L3 | M/S JAI BHAWANI CONSTRUCTIONS L5 | M/S.Chourasia Construction Company L9 | M/s Dara Constructions, Pulgaon L1 | M/s VILAS RATAN MENDHE L8 | Arnav Enterprises L6 | I P Constructions L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S & F in repairs 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs etc fixed with 'L' or 'J' or cranked hooks bolt all as specified and directed by EIC. | 60 | Sqm | 300 ₹18,000 | 292 ₹17,520 Lowest | 300 ₹18,000 | 401 ₹24,060 | 491 ₹29,460 | 340 ₹20,400 | 425 ₹25,500 | 500 ₹30,000 | 400 ₹24,000 |
| 2.00 | All as per above item No 01 here-in-before but fixing only (except sheets) | 20 | Sqm | 150 ₹3,000 | 52 ₹1,040 | 53 ₹1,060 | 151 ₹3,020 | 141 ₹2,820 | 42 ₹840 Lowest | 140 ₹2,800 | 145 ₹2,900 | 50 ₹1,000 |
| 3.00 | S & F in repairs 0.63 mm thick Plain, galvanised, mild steel sheeting with zinc coating @ 275 grams per sqm in ridges all as per site requirement | 50 | Sqm | 750 ₹37,500 | 752 ₹37,600 | 900 ₹45,000 | 768 ₹38,400 | 961 ₹48,050 | 692 ₹34,600 Lowest | 950 ₹47,500 | 800 ₹40,000 | 800 ₹40,000 |
| 4.00 | All as per item No 03 but fixing only (except sheeting) all as per site requirement & directed by EIC | 25 | Sqm | 550 ₹13,750 | 52 ₹1,300 Lowest | 100 ₹2,500 | 178 ₹4,450 | 151 ₹3,775 | 100 ₹2,500 | 200 ₹5,000 | 160 ₹4,000 | 100 ₹2,500 |
| 5.00 | S & F in repairs 1 mm thick Plain, galvanised, mild steel sheeting with zinc coating @ 275 grams per sqm in valley gutter with 150 mm lap joint water proof as directed cut to size and bent to shape turning up and down including stopped end punching holes and making with head screws to support with bitumen washers and finally finished with self adhesive aluminium coated waterproof flashing tape all as specified. | 25 | Sqm | 650 ₹16,250 Lowest | 801 ₹20,025 | 1,386 ₹34,650 | 1,068 ₹26,700 | 1,411 ₹35,275 | 1,078 ₹26,950 | 1,450 ₹36,250 | 980 ₹24,500 | 1,170 ₹29,250 |
| 6.00 | All as per item No 05 but fixing only (except sheeting) all as per site requirement & directed by EIC. | 25 | Sqm | 500 ₹12,500 | 72 ₹1,800 Lowest | 100 ₹2,500 | 178 ₹4,450 | 161 ₹4,025 | 100 ₹2,500 | 200 ₹5,000 | 175 ₹4,375 | 100 ₹2,500 |
| 7.00 | M&L in cleaning Valley gutter to avoid water blockage and making joints good for lap jointing with self adhesive aluminium coated waterproof flashing tape complete all as specified. | 50 | RM | 150 ₹7,500 | 52 ₹2,600 | 100 ₹5,000 | 25 ₹1,250 | 31 ₹1,550 | 24 ₹1,200 | 20 ₹1,000 Lowest | 20 ₹1,000 Lowest | 100 ₹5,000 |
| 8.00 | S & F in repairs wrought iron or mild steel work as in MS wind ties of specified size for AC Sheet roofing including all necessary drilling,bolting or riveting etc and similar work coinforming to Fe-290 Gde E-165 all as specified and directed by EIC. | 300 | Kg | 150 ₹45,000 | 100 ₹30,000 | 100 ₹30,000 | 103 ₹30,900 | 141 ₹42,300 | 96 ₹28,800 Lowest | 130 ₹39,000 | 100 ₹30,000 | 130 ₹39,000 |
| 9.00 | Fixing in repairs only MS wind ties after fixing of AC sheet all as specified and directed by EIC. | 100 | Kg | 100 ₹10,000 | 21 ₹2,100 | 21 ₹2,100 | 23 ₹2,300 | 31 ₹3,100 | 15 ₹1,500 Lowest | 20 ₹2,000 | 20 ₹2,000 | 20 ₹2,000 |
| 10.00 | M & L for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces or rusted old surfaces in wind ties, cladding sheet etc exc 10cm width or girth including preparation of new or rusted steel surfaces all as specified and directed by EIC. | 2,800 | Sqm | 70 ₹1,96,000 | 50 ₹1,40,000 Lowest | 53 ₹1,48,400 | 101 ₹2,82,800 | 91 ₹2,54,800 | 51 ₹1,42,800 | 70 ₹1,96,000 | 80 ₹2,24,000 | 90 ₹2,52,000 |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
15 Jun 2026, 6:00 pmClosed
GE PULGAON
GE PULGAON CAD PULGAON 442303
REPAIR /REPLACEMENT OF AC SHEET AND GALVALUME SHEET AND OTHER CONNECTED B/R WORKS INSIDE SUB DEPOT AREA AT CAD PULGAON
2026_MES_767575_1
8377/E8
Open Tender
Civil Works
Item Rate
270 days
GE PULGAON
As per Tender documents
8 documents required · 8 mandatory
₹500
GE PULGAON
₹70,000
Yes
18 Jul 2026
25 May 2026
17 Jun 2026
25 May 2026
15 Jun 2026
8 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S & F in repairs 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs etc fixed with 'L' or 'J' or cranked hooks bolt all as specified and directed by EIC. | 60 | Sqm | - | - |
| 2 | All as per above item No 01 here-in-before but fixing only (except sheets) | 20 | Sqm | - | - |
| 3 | S & F in repairs 0.63 mm thick Plain, galvanised, mild steel sheeting with zinc coating @ 275 grams per sqm in ridges all as per site requirement | 50 | Sqm | - | - |
| 4 | All as per item No 03 but fixing only (except sheeting) all as per site requirement & directed by EIC | 25 | Sqm | - | - |
| 5 | S & F in repairs 1 mm thick Plain, galvanised, mild steel sheeting with zinc coating @ 275 grams per sqm in valley gutter with 150 mm lap joint water proof as directed cut to size and bent to shape turning up and down including stopped end punching holes and making with head screws to support with bitumen washers and finally finished with self adhesive aluminium coated waterproof flashing tape all as specified. | 25 | Sqm | - | - |
| 6 | All as per item No 05 but fixing only (except sheeting) all as per site requirement & directed by EIC. | 25 | Sqm | - | - |
| 7 | M&L in cleaning Valley gutter to avoid water blockage and making joints good for lap jointing with self adhesive aluminium coated waterproof flashing tape complete all as specified. | 50 | RM | - | - |
| 8 | S & F in repairs wrought iron or mild steel work as in MS wind ties of specified size for AC Sheet roofing including all necessary drilling,bolting or riveting etc and similar work coinforming to Fe-290 Gde E-165 all as specified and directed by EIC. | 300 | Kg | - | - |
| 9 | Fixing in repairs only MS wind ties after fixing of AC sheet all as specified and directed by EIC. | 100 | Kg | - | - |
| 10 | M & L for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces or rusted old surfaces in wind ties, cladding sheet etc exc 10cm width or girth including preparation of new or rusted steel surfaces all as specified and directed by EIC. | 2,800 | Sqm | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
BOQ_859622.xls
BOQ • 0.31 MB
Tenderdocus8377.pdf
Tender Documents • 0.92 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .