Const of Balance works (Interior Furniture, Decoration,Fascade ,Facilities for person with disabilities, Porches,Courtyard skylights,OWC machine etc) for Metropolitant Magistrate court building (stilt plus 17) stories on cts no 372 at Mazgaon Mumbai

Amount

Partition and Panelling

Item No 1 Full Ht. Solid Partition: Providing and fixing Full height partition of minimum 65 mm thick made by using aluminium frame with 50x50 mm vertical members eqully spaced at 600c/c fixed with 4 mm thick veneer fixed on 12mm thick bison board, front band with 1mm thick laminate fixed on 19mm marine plywood, and 6mm thick clear glass fixed with necessary fixtures and fastenings as shown in the Drawing No.SF-MC-ID-104 etc all complete as per insructions of engineer in charge.with guarantee of 10 years.

Item No 2 Full Ht. Glass Partition: Providing & Fixing of SONIC make STL 25 i.e. Single glazed modular system consists of Aluminium section of 25*25*2.5 mm thick. All sections duly anodised up to 20‐25 microns with 6063‐T6 grade and required accessories i.e. glass to glass aluminium I sections, T section & 90‐degree sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 25 mm wide with 10mm toughen glass & insertion of Thermoplastic gasket to adhere the glass firm & airtight. The sound reduction Value is from 32 to 35 Db.with guarantee of 10 years.

Item No 3 Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell as per the choice of the Architect of size 600x600mm, 600x1200mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel Impalers supplied by Armstrong Ceiling Solutions and construction adhesives as per the instructions laid down by the manufacturer. with guarantee of 10 years. INSTALLATION: In order to fix the panels to the wall, the Impalers shall be fixed to the wall surface using self tapping screws. 3 nos. in case of 600x600mm, 4 nos in case of 600x1200mm in wall panel Impalers to be used for the installation purpose. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Armstrong Optra wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.

Item No 4 Full Ht.Screen ‐ Providing and fixing full height laser cut design of trinaguar slats made in 19 mm thick marine plywood of the requisite manufacturer Viz Anchor/Century/Kenwood/Greenlam/Duro/ Jet or equivalent generally Confirming to IS 303/ IS710-1980 fixed in 38mm x 50 mm C.C.T.W. wooden border and 19mm thick horizontal and vertical wooden members both finished in melamine polish, all complete as per insructions of engineer in charge.Laser Cut As per Drawing No.SF-MC-ID-112.

Item No 5 Half Ht. Solid Partition:Half height partition upto 1.5 m (5' ) ht. and minimum 65 mm thk made by using 50x50 mm vertical members eqully spaced aluminium frame at 600 c/c fixed with 12mm thick plywood on either side finished with approved 4 mm thick veneer ( color and finish as per specifications) etc all complete. as per insructions of engineer in charge.As per Drawing No.SF-MC-ID-105.with guarantee of 10 years.

Item No 7 Wallpaper:Providing and pesting wall paper of Marshalls or similar make on existing surface of walls/ partition by preparing the surface in smooth and level including pesting the wall paper of approved colour/ shade and design in proper cutting shade by using required adhesive to pesting the paper etc. complete.

Item No 8 Veneer Panelling: Providing and fixing 8'x4', 4mm thick walnut or oak veneer panelling on walls of approved make on plywood backing made out of 50*25mm thick C.C.T.W. frame work of size 600*600mm centre or as per site condition covered by 12mm thick BWP710 grade marine plywood of the requisite manufacturer Viz Anchor/Century/ Kenwood/ Greenlam/Duro/ Jet or equivalent generally Confirming to IS 303/ IS710-1980 finished with anti termite treatment etc complete as per Architects Drawings and Instructions of Egineer Incharge.with guarantee of 10 years.

Item No 9 Sky Light:Providing and fixing sky light in R.C.C. roof including frame made of M.S. angle 50 x 50 x 6 mm with hold fast, sheet glass 5 mm thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting etc. complete as per instructions of engineer in charge.

Item No 10 GFRC Panel:GFRC Panel embossed with indian emblem 15 mm thk Birla white or similar make wall panelling made out of 50*25mm thick C.C.T.W. frame work of size 600*600mm centre or as per site condition covered by 6mm thick marine plywood of the requisite manufacturer Viz Anchor/Century/Kenwood/Duro/ Jet or equivalent generally Confirming to IS 303/ IS710-1980 finished with 4 mm thick veneer approved Colour and in Pattern and including melamine polishing & design anti termite treatment etc complete as per Architects Drawings and Instructions of Egineer Incharge.with guarantee of 10 years.

Item No 11. Jail Bars: Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc complete.

Item No 12.Blinds:Supplying and Fixing of Hunter Douglas FR rated Duette Architella Opaque Honeycomb inside honeycomb shades with GreenGuard (R) Gold rating, fabric is Mircoshield protected which is antimicrobial fabric agent. The fire protection rating is NFPA 701 having 3 air pockets for maximum energy effeciency. Duette fabric with high tear strength constructed out of Anti static, resilent, colour fast & Sanitized Treated 100% spun bonded non-woven polyester fiber & precision manufacture to form a hexagonally shaped duette pleat with cellular construction.Headrail and bottomrail constructed of aluminum alloy 6063-T6 internally and externally fit with color coordinated components required for specified performance and designed for smooth, quiet, trouble-free operation. The headrail shall measure 50.4mm*47.6mm*1.27mm thick constructed of aluminum alloy 6063. Internally fit with components required for specified performance designed for smooth, quiet, trouble-free operation. Finish to be standard Powder coated white finish with a thickness of 60-80 microns. The bottom rail measuring 47.6mm*29mm*1.2mm thick constructed of aluminum alloy 6063-T6 with standard powder coated white finish with a thickness of 60-80 microns. Fabric shall be constructed from spun-bonded polyester fibre, precision manufactured to form a hexagonally shaped, dual pleat, cellular construction. All cords & cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats operate independent of each other providing superior pleat retention & structure strength. Fabrics meet all requirements of NFPA 701 small scale flammability testing for commercial installation applications. The PET lining inside makes it a opaque fabric. Installation brackets shall be of high tension spring steel suitable for overhead & wall mounting & for use in conjunction with extension bracket. Extension bracket shall be press-formed from 19x3.2mm mild steel finished in clear passivated Zinc plate. Polyster Cord shall be 0.9mm in diameter & of woven hollow core construction. Rail slat insert shall be of 25mm wide, 0.175 or 0.2mm thick crowned aluminum slat. It should have EasyRise mechanism lifting system, with our EasyRise continuous cord loop you can raise, adjust and lower shades by simply pulling on the cord. This EasyRise mechanism white engineering plastic rotary clutch mechanism provides ease of operation when continuous cord loop is activated and holds shade in place unless force is applied. White color braided polyester 2.794mm continuous cord loop provides uniform cord length with polycarbonate cord tensioner for additional safety. White nylon-covered polyester 2.45mm wide * 0.17mm thick lift tape allows for easy operation of heavy shades. Located on either side on individual shade unit as per architect’s request. End cap shall be molded acrylic color matched to the head & bottom rails. Cord equiliser shall be injection moulded from impact modified acrylic with a high flexural modules etc.all complete as per directions of Engineer-in-charge. (Without Motorised)

Item No 13.Curtains: Providing and fixing curtains of D'Décor or Sarom orequivalent make ‐ atleast 350 gsm, fabric upto of required size all commplete as per instructions of engineer in charge.

Item No 14.Supplying and Fixing Hunter Douglas PowerView AC Silent Motor with noise level of 39dB operating on Pebble Remote for better ergonomics having 6 channels for multiple shades operation. It comes with a Built In Dry contact input pot on the motor head for low voltage automation convenience. The remote and motor operate on a frequency which is 2.4 Ghz used for regular civil operation. Motor embedded with advanced features and technology of voice enabled control when used along with Hunter Douglas Hub and WiFi Nominal Torque (Nm): 3 ,Output Speed: 30 rpm ,Limit switch turns: 160 revolutions ,Mains Voltage: 230V / 50Hz, Power Consumption: 90 W ,Nominal Current Consumption (A): 0.39 ,Operating Mode: 4 Min,Degree of Protection: IP 44,incuding Remote Controll etc.

Item No 15.Mirror: Providing and fixing 6mm extra clear mirror of Saint Gobain/ Asahi or equivalent make on 12mm marine ply of Greenlam/Century or eqivalent make backing fixed with invisible studs of reputable brand with approval of engineer in charge.all commplete

Item No 16.1 Blackboard: Providing and fixing blackboard at required locations as per instructions of engineer incharge etc complete.

Item No 16.2 Soft Board: Providing and fixing on site notice board made out of 6 mm marine ply of the requisite manufacture generally confirming to I.S.310/I.S.710-1980 backing and 12 mm thick soft board covered with tapestry/up to Rs. 200 per meter including necessary lipping (BTC), moulding, hardware, polishing etc. and Anti-termite treatment to plywood and woodwork with ten years guarantee bond etc. including all leads & lifts etc. complete as per Architect Drawing and instructions of Engineer in Charge.

Item No 16.3 White Board: Supplying and fixing of white magnetic board mounted in frame size 8' x 4' as per requirement.

Item No 17.Glass sliding door:Providing & Fixing of SONIC make Stile Door System width 45 X 75 mm with 6063‐ T6/20‐25 Microns Anodized Aluminium Sections having door profile sizes of 105 x 30mm, with 10 mm Toughened Glass including Assa Abloy make sliding door channel, SS Lever Handle with Mortice Lock Set, and all other accessories complete.

Item No 18.Collapsible Gate: Providing and fixing Mild steel collapsible shutter gate with powder coating finish with lock mechanism ‐ side opening etc all commplete as per detailed drawing and specifications.

Item No 19.Rug: Providing and supplying 100% Wool/Viscose Flat Weave Machine Made Rug of proper design and approved brand as per instructions of engineer In charge.

Item No 20.SheraBoard: Providing and fixing Sherboard planks 6" wide on ceiling with all necessary aluminium framing and fitting etc complete as per instructions of engineer Incharge

Item No 21.Etched Glass:Etching on 12mm toughened glass as per design and as requirement..As per instructions of engineer incharge.

Modular and built in furniture

Item No 22.Staff Chair:Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam 50mm thick having density 50kg/m³ with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine. The seat and back shall be arrested together with 50‐ 60µ thick powder coated HR steel spine and the armrest shall be used injection moulded polypropylene fixed armrest completely joint with seat. For seating duraility the chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class‐3 gas‐lift to suit them using the lever under the seat. The gas‐lift mechanism should be tested as per ANSI/BIFMA X5.1‐2011 standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1‐2011 standard tested to perform 98,000 cycles with 250lbs load. HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Geeken Seating, Nilkamal or similar make with guarantee of 10 years etc complete.(The seat size shall be 480±10 mm(D) X 470±10 mm(W) and back size shall be 450±10 mm(W) X 470±10 mm(H) from seat. Overall height shall be = 890±10 mm, overall depth = 570±10 mm, overall width = 610±10 mm..)

Item No 23.Reception Desk:Providing & fixing Reception Desk of required size in the reception lobby with all necssary materials and fittings as shown in the drawing (As per dwg SF‐MC‐ID‐102) etc complete. Mode of Measurement- Measurement of table top

Item No 24.Token Counter Table:Supplying & Placing Modular table of size 750Wx1430Lx750H in completely knock down conditions with an overall to be assembled at site. The worktop shall be 43 mm thick having the combination of 19mm marine ply of Greenlam, Century or Anchor make as top and 25mm thk marine ply as base top. The top shall have approved laminate and shade as well as deco paint. The profile shall be in rectangle shape with round front and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding and base top shall be in half round post forming with grooves. The top shall be supported on 75mm Peg mounted over side storage unit at one end and fixed pedestal unit at another end. The table shall be clad with 19mm thick modesty panel which provide structural support for the table having round profile in middle section and linear on both left and right with appropriate PVC edge banding connected with both end on side unit and fixed drawer with 25mm round spacer. The table shall have side unit for storage purpose made up of Pre‐laminated 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make with top 25mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The side storage unit shall be mounted on 75mm Peg.The manufacturer shall have quality and safety assurance like ISO‐9001:2015, ISO‐14001:2015 and ISO‐18001:2007 certification.

Item No 25.Canteen Table:Supplying & placing cafe table with an overall size 900mm x 900mm x 750mm. The top of the table shall be made up of 20mm thick granite rock. The top profile shall be in square shape and the edges shall be in round shape. The top shall be supported on 11mm thick ply‐board having size 750mm X 750mm and SS 202 grade pipe frame having cross‐section area 40mm X 20mm with 1.6mm thick in X shape. The table under structure shall be made up of SS grade 202 base pole leg having Dia. 63.5mm. The base shall be in X shape with SS pipe frame having cross‐section area 40mm X 40mm. There shall be leveler shoe provided with metal insert at the base to avoid scratches on the floor. The manufacturer shall have quality and safety assurance like ISO‐ 9001:2015, ISO‐14001:2015 and ISO‐18001:2007, BIFMA membership and AIOTA certification.

Item No 26.Canteen Chair:Supplying & Placing Cafe Chair. The seat size shall be 390±10 mm(D)X440±10 mm(W) and back size shall be 440±10 mm(W)X385±10 mm(Ht) from seat. Overall height shall be = 815±10 mm, overall depth = 445±10 mm.. The seat and back shall be made of moulded polypropylene shell of 5mm thick. The seat & back shall be bend in L‐type shape. The frame structure shall be supported by four legs made up of MS CRCA chrome plated round pipe of Dia 20mm with 1.5mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Geeken Seating, Nilkamal or similar make with guarantee of 10 years.

Item No 27.Serving Counter::Providing & fixing serving counter of size 1100Wx6460Lx750H in the canteen with all necssary materials and fittings as shown in the drawing etc all complete.(As per dwg SF‐MC‐ID‐113)

Item No 28.Pantry Counter:Providing & fixing pantry counter of size 600Wx5500Lx850H in the canteen with all necssary materials and fittings as shown in the drawing etc complete. (As per dwg SF‐MC‐ID‐115)

Item No 29.Inward/Outward Table:Providing and fixing table to be factory made n 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make with post form edges as per reference design..etc all complete.

Item No 30.Visitor Chair:Providing and supplying visitor chair with ergonomic design for user comfort. The seat size shall be 450±10 mm(D) X 440±10 mm(W) and back size shall be 415±10 mm(W) X 405±10 mm(H) from seat. Overall height shall be = 835±10 mm.The seat shall be made of 9mm thick hot pressed plywood upholstered with high resilience polyurethane foam 25mm thick having density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of double layered moulded hot pressed plywood (6+9)mm thick upholstered with high resilience polyurethane foam 19mm thick having density 23kg/m³ with leatherite tapestry 0.8mm thick and 300 GSM. The seat and back shall be arrested together with MS/CRCA pipe frame and the armrest shall be used polypropylene arm mounted on pipe frame completely joint with seat and back. The frame structure shall be supported by four legs made up of MS/CRCA chrome plated round pipe of Dia. 25.4mm with 1.6mm thick. There shall be co‐polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 450±10 mm(D) X 440±10 mm(W) and back size shall be 415±10 mm(W) X 405±10 mm(H) from seat. Overall height shall be = 835±10 mm. HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Geeken Seating, Nilkamal or similar make with guarantee of 10 years...etc all complete.

Item No 31.Pigeon Hole Rack 1:Providing and fixing in position baggaging rack of size 300Wx3070Lx2100H model name Pigeon hole having side, top, bottom and shelf panel made up of 19mm thick Pre‐laminated marine ply of Century or Anchor make (BWP710 grade) and back panel made up of 19mm thick Pre‐laminated marine ply and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The compartment size shall be approx. 275mm X 275mm. The manufacturer shall have quality and safety assurance like ISO‐9001:2015, ISO‐14001:2015 and ISO‐18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw‐withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. .etc all complete as per instructions of engineer in charge.

Item No 32.Pigeon Hole Rack 2:Providing and fixing in position baggaging rack of size 300Wx3295Lx2100H of model name Pigeon hole having side, top, bottom and shelf panel made up of 19mm thick Pre‐laminated marine ply of Century or Anchor make (BWP710 grade) and back panel made up of 19mm thick Pre‐laminated marine ply and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The compartment size shall be approx. 275mm X 275mm. The manufact. shall have quality and safety assurance like ISO‐9001:2015, ISO‐14001:2015 and ISO‐18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw‐withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380..etc all complete as per instructions of engineer in charge.

Item No 33.Staff Table:Providing & fixing factory made staff tables of various sizes with all necssary materials and fittings as shown in the drawing ..etc all complete as per instructions of engineer in charge.(As per dwg SF‐MC‐ID‐116)

33.1) 750Wx1550Lx750H

33.2) 750Wx1760Lx750H

33.3) 750Wx2510Lx750H

33.4) 750Wx1500Lx750H

33.5) 750Wx2000Lx750H

33.7) 750Wx2630LX750H

33.8) 750Wx1680LX750H

33.9) 750Wx1185LX750H

33.1) 750Wx1600LX750H

33.11) 750Wx2100LX750H

33.12) 750Wx1205LX750H

33.13) 750Wx2610LX750H

33.14) 750Wx2290LX750H

33.15) 600Wx1200LX750H

33.16) Main Table ‐750Wx1700Lx750H Side Credenza ‐300Wx900Lx750H

33.17) 750Wx1200LX750H

33.18) 750Wx1365Lx750H

33.19) 750Wx1250Lx750H

33.2) 750Wx1270Lx750H

33.21) Main Table 750Wx1400Lx750H Side Credenza ‐450Wx900Lx750H

33.22) 750Wx1540Lx750H

33.23) Main Table ‐ 600Wx1350Lx750H Side Table ‐450Wx1185Lx750H

33.24) 600Wx1500LX750H

33.25) 600Wx1230LX750H

33.26)750Wx1665LX750H

33.27) 750Wx1725LX750H

Item No 34.Printer Table:providing and fixing table to be factory made n 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make as per reference drawing and design..etc all complete as per instructions of engineer in charge.

34.1)750Wx750LX750H

34.2)950Wx750LX750H

Item No 35.Executive Table:Supplying & Placing Modular table in completely knock down conditions with an overall to be assembled at site. The worktop shall be 43 mm thick having the combination of 19mm marine ply of Greenlam, Century or Anchor or equivalent make as top and 25mm thk marine ply as base top. The top shall have approved laminate and shade as well as deco paint. The profile shall be in rectangle shape with round front and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding and base top shall be in half round post forming with grooves. The top shall be supported on 75mm Peg mounted over side storage unit at one end and fixed pedestal unit at another end. The table shall be clad with 19mm thick modesty panel which provide structural support for the table having round profile in middle section and linear on both left and right with appropriate PVC edge banding connected with both end on side unit and fixed drawer with 25mm round spacer. The table shall have side unit for storage purpose made up of Pre‐laminated 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make with top 25mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 2 drawer and 1 shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The side storage unit shall be mounted on 75mm Peg. A pedestal shall be provided with an overall size 500mm X 750mm X 640mm. The pedestal shall be made up of Pre‐laminated 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make. Pedestal side, back, facia shall be 18mm thick, top 25mm and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted on 75mm Peg. The manufacturer shall have quality and safety assurance like ISO‐ 9001:2015, ISO‐14001:2015 and ISO‐18001:2007 certification...etc all complete as per instructions of engineer in charge.

Item No 35.1.Main table 1 ‐ 750Wx1500Lx750H Side credenza ‐450Wx1140Lx750H

35.2)Table 2 ‐ 750Wx1300Lx750H

35.3)Table 3 ‐ 750Wx1650Lx750H

35.4)Table 3 ‐ 750Wx1500Lx750H

35.5) Main table 4 ‐750Wx1700Lx750H S credenza ‐450Wx1200Lx750H

35.6) Main Table 5 ‐ 750Wx1800Lx750H S Table ‐450Wx900Lx750H

36.1)670Wx5640Lx750H

36.2)670Wx5690Lx750H

36.3) 600Wx4500Lx750H

36.4) 600Wx2220Lx750H

36.5) 620Wx3740Lx750H

36.6)620Wx3280Lx750H

36.7)620Wx3515Lx750H

36.8)620Wx3685Lx750H

36.9)600Wx2610Lx750H

36.1)620Wx4000Lx750H

36.11)620Wx3165Lx750H

36.12)620Wx3365Lx750H

36.13)620Wx4895Lx750H

36.14)615Wx5440Lx750H

36.15)615Wx3240Lx750H

36.16)450Wx800Lx750H

36.17) 70Wx3075Lx750H

36.18) 620Wx3740Lx750H

36.19)620Wx6120Lx750H

36.20) 375Wx6120Lx750H

36.21) 620Wx3200Lx750H

36.22)620Wx3280Lx750H

36.23) 600Wx3000Lx750H

36.24)600Wx3350Lx750H

36.25) 620Wx3740Lx750H

36.26)620Wx3280Lx750H

36.27)620Wx3515Lx750H

36.28)620Wx4000Lx750H

36.29)620Wx3165Lx750H

36.3)620Wx3365Lx750H

36.31) 620Wx3645Lx750H

36.32) 480Wx5400Lx750H

36.33)450Wx3600Lx750H

36.34) 600Wx2400Lx750H

Item No 37.Cupboard:Storage cabinet of size 400Wx900Lx1750H of primary material 20 ‐ 22 gauge steel sheets with 6mm thk. toughened glass front of Saint Gobain or similar make with lock mechanism and internal shelving provided not less than 400mm clear as per reference design with adjustable shelving etc all complete as per instructions of engineer incharge.

Item No 38.Open Racks:Providing, placing and installing a closed slotted angle rack with an overall size 900mm (W) X 450mm (D) X 1800mm (H). The panel shall have 5 nos. of adjustable shelves made up of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. CRCA slotted angle shall be supplied with 2mm thick having size 40mm X 40mm. All steel components shall be 40‐60µ thick (DFT) powder coated after 7 tank pre‐treatment process flow. Corner plate (gussets) and fasteners shall be provided for complete assembly.etc all complete as per instructions of engineer incharge.

38.1.)450D x Total Length 78,640 x 2100H

38.2)450D x Total Length 68,670 x 2100H

Item No 39.1)Compactors:Providing and placing mechanically assisted drive mechanism Mobile compactor of size 450 X 450 Module ‐ 4 module x 5 rows x 2100H . The structure shall be made out of 0.8 thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. Each unit have 5 loading levels formed by 4 nos. of adjustable shelves. Body units are bolted to undercarriage. Compactor height from ground should be 2185 mm (2020 body + 165 undercarriage). The body including shelves shall be given antirust surface treatment & powder coated with epoxy polyester powder. It involves an 7 step treatment, Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. It shall have max. load bearing capacity of 60 Kg uniformly distributed per shelf. Shelves shall be mounted on support brackets & shelf level can be adjusted. The Undercarriage shall be welded frame made of HR sheet minimum 2.5 mm thick suitably fabricated to take the loads based on configuration. A Centralized locking arrangement shall be provided through Locking Stiffener mounted onto back of Single Last unit so that it gets locked on channels when all the units are brought together. This arrangement occupies a space of 100 mm. Each Drive type units have Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. End stoppers are provided at the end of channels to prevent derailment. The nuts & bolts are galvanized / Zn Plated. Movement of units shall be achieved mechanically through a Drive wheel and ‘Sprocket‐Chain‐Tensioner’ arrangement mounted rigidly onto body side. etc all complete.

Item No 39.2)Locker:Overall size of Personal Locker Unit with add on units shall be of dimensions 380mm(W) X 450mm(D) X 1800mm(H) having 4 locker unit. Stackability shall have add ‐ on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have cam lock with lock lever plus option. Material shall be CRCA 0.8 mm thickness. Shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum. Finish shall be epoxy polyester powder coated to the thickness of 50 microns. Handle/Label holder shall be aesthetically appealing Snap fit ABS plastic handle. Ventilation shall be attractive punched pattern for ventilation etc all complete as per reference design and instructions of engineer in charge.( Size 500Dx400Wx1800H)

Item No 40)Stenographer's Table:Providing & fixing factory made tables with all necssary materials and fittings as shown in the drawing ..etc complete.(As per dwg SF‐MC‐ID‐103)

40.1)750Wx2060Lx750H

40.2)750Wx1200Lx750H

40.3)Main Table ‐ 750Wx1650Lx750H Side Credenza ‐ 450Wx880Lx750H

Item No 41.Stenographer's Chair:Task intensive swivel chair of size 700Wx700Dx900H w 400‐500 seat height with armrest & swivel mechanism with adjustable back height. Seat and backrest made of mouldedpolyurethane foam with PVC base and arms of HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Nilkamal or similar make with guarantee of 10 years.. etc all complete

Item No 42.Bar Room Table:Table made of seasoned sheesham wood finished with melamine polish with 75x75mm legs and binders & top in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. Veneer in approved color with PU finish as per reference design and instructions of engineer in charge etc all complete.

42.1)900Wx2500Lx750H

42.2)750Wx1200Lx750H

42.3)1200Wx8850Lx750H

42.4) 900Wx2675Lx750H

42.5)900Wx2700Lx750H

42.6)900Wx6100Lx750H

Item No 43.Library Rack:Providing and supplying metal book case with an overall size The book case shall be supplied with 4 nos. of individual compartments. Top, back & side panels shall be made of 0.8mm and rest 1mm high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. Each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. Each door shall have plastic side end caps as handle which is easy to grip. Each compartment has a storage shelf having Uniformly Distributed Load Capacity of each shelf is 40 Kg maximum. The finish is Epoxy Polyester Powder coated to the thickness of 40‐60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.etc all complete as per instructions of engineer incharge .

43.1)350Wx900Lx1800H

43.2)350Wx750Lx1800H

Item No 44.Library Reading Table:Reading Table of size 750Lx500Wx1800H of Steel Construction of 304 grade in mirror finish with Gas Spring & Squeeze Lever and Stepless Height Settings provided with Heavy‐Duty Casters and locking mechanism.etc all complete as per instructions of engineer incharge .

Item No 45.Librarian's Desk:Stainless Steel Table of 1650Lx750Wx750H of Grade 304 with mirror finish with wheels and front modesty panel as per design.etc all complete as per instructions of engineer incharge .

Item No 46.De‐stress Room Table:Table made in 19mm thk. Marine plywood BWP710 grade of Century or Anchor make; finished in 1mm thk. Laminate of Greenlam or similar make in approved color. Size as per plan.etc all complete as per instructions of engineer incharge .

46.1)600Wx600Lx750H

46.2)600Wx2770Lx750H

46.3)600Wx3600Lx750H

Item No 47.Patient Bed:Patient Bed ‐ Supplying and installing bed of size 1000Wx2100Wx600H. Backrest Section Adjustable Up to 900 mm Manual Operating System: Removable head & foot panels. Aluminium railing with pushdown Button. Legs Fitted With PVC Shoes. Two section perforated Top. Saline arrangement with Four Location. 100mm foam mattress with Rexine cover suitable for Bed. Urine bag hook. Finish Pretested in 7 Tank Hot Process & Powder Coated of Welcraft India, HOF India or similar make.etc as per instructions of engineer incharge .

Item No 48.Doctor Table:Stainless Steel Table of size 1500LX750DX750H and Grade 304 with mirror finish with wheels and front modesty panel as per design and instructions of engineer in charge.

Item No 49)Patient Bedside Cabinet: Providing bed side cabinet of size 400Wx400Lx800L. One drawer at upper side. CRC sheet cabinet. One box at bottom. One S.S. top at upper side. S.S. railing at three sides. 50mm dia. castors. Finish Pretested in 7 Tank Hot Process & Powder Coated of Welcraft India, HOF India or similar make

Item No 50.Sterile cabinet ‐ Providing and fixing sterile bed of size 450WX650LX1575H. Three side glasses. Five glass shelves. Lock system. Made from CRC sheet & CRC Pipe. Finish Pretested in 7 Tank Hot Process & Powder Coated of Welcraft India, HOF India or similar make

Item No 51.Records Store:Providing, supplying and placing steel almirah in perfectly upright and straight position. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. Door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 40‐60µ.

51.1)550Wx900Lx2000H

51.2)550Wx750Lx2000H

52.1.)350Wx1200Lx600H

52.2)350Wx1650Lx600H

52.3)350Wx1500Lx600H

52.4)350Wx1270Lx600H

52.5)350Wx1250Lx600H

52.6)350Wx1540Lx600H

52.7)350Wx6600Lx600H

52.8)350Wx9330Lx600H

52.9)350Wx6120Lx600H

52.1)350Wx6120Lx600H

52.11)350Wx5500Lx600H

52.12)350Wx4015Lx600H

53.Judge's Office ‐ Table: Providing and fixing Table with side credenza 1800Wx2100Dx750H, Back Unit 1800WX500DX750H.Table to be factory made n 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make with post form edges as per reference design.

54.Judge's Office ‐Chair: supplying the chair of seat size shall be 520±10 mm(D) X 530±10 mm(W) and back size shall be 530±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1160±10 mm, overall depth = 705±10 mm & overall width = 675±10 mm.Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply‐board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and cushion base leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class‐3 gas‐lift to suit them using the lever under the seat. The gas‐lift mechanism should be tested as per ANSI/BIFMA X5.1‐ 2011 standards. The Pedestal should have five legged metal insert CRCA covered with natural wood having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1‐2011 tested to perform 98,000 cycles with 250lbs load. HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Nilkamal, Geeken Seating or similar make with guarantee of 10 years.

55.Judge's Office Sofa (Two seater):Supplying and placing a two seater sofa of size 1500Lx750Dx800H ‐ 450 seat height, that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The armrest shall be flap with soft cushion on both side for aesthetically appealing as well as side comfort. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have MS powder coated frame having thickness 8mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing.

56.Judge's Office Sofa (Single seater):Supplying and placing a single seater sofa of size 900Lx750Wx800H ‐ 450 seat height. It shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The armrest shall be flap with soft cushion on both side for aesthetically appealing as well as side comfort. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have MS powder coated frame having thickness 8mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing.

57.Judge's Office ‐ Coffee Table( Rectangular): Providing rectangular Coffee table of size 900Lx600Wx500H with top in 6mm clear toughened glass of Saint Gobain or similar make and base in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. App. Veneer. & 50x100mm legs in seasoned sheesham wood both finished in melamine polish.

58.Judge's Office ‐ Coffee Table( Circular): Providing Circular Coffee table of size 600 Dia x 500H with top in 6mm clear toughened glass of Saint Gobain or similar make and base in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. App. Veneer. & 50x50mm legs & edge frame in seasoned sheesham wood both finished in melamine polish.

59.Judge's Office ‐ Cupboard: Providing Storage cabinet of size 1500Lx600DX1800H, made in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. veneer in approved color.Shutters with aluminium frame made in 6mm thk. clear toughened glass of Saint Gobain or similar make with lock mechanism. Internal shelves to have a clear height of not less than 350mm.

60.Courtroom ‐ Judge's Table:Providing and fixing Table of size1200Wx2400Lx750H with all necssary materials and fittings as shown in the drawing ..etc complete.(As per dwg SF‐MC‐ID‐106-107)

61.1.Courtroom ‐ Steno Table:Providing and fixing Table of size 600Wx1200Lx700H with all necssary materials and fittings as shown in the drawing ..etc complete.(As per dwg SF‐MC‐ID‐106-107)

61.2.Courtroom ‐ Lawyer's Table: Providing and fixing Table of size 750Wx2400Lx800H with all necssary materials and fittings as shown in the drawing ..etc complete.(As per dwg SF‐MC‐ID‐106-107)

62.Courtroom ‐ Storage Cupboard: Providing and fixing Storage cabinet of size 415WX600LX2400H and made of 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. App. Veneer with shelves having clear height of atleast 350mm with openable shutter part solid upto 750mm and part glass made of 8mm ribbed glass of Saint Gobain or similar make. Cabinet to be provided with lock & key mechanism and 304 grade SS handle & to have 75mm high skirting finished in 4mm thk. app. veneer.As per reference design& as per approval of engineer in charge.etc all complete.

63.Courtroom ‐ Window Side Storage:Providing and fixing storage units of various sizes with all necssary materials and fittings as shown in the drawing and instructions of engineer in charge.etc complete.(As per dwg SF‐MC‐ID‐106-107)

63.1)620Wx5540Lx1000H

63.2)620Wx2125Lx1000H

63.3)620Wx3225Lx1000H

63.4)620Wx3280Lx1000H

63.5)620Wx1840Lx1000H

63.6)620Wx2275Lx1000H

63.7)620Wx5240Lx1000H

63.8)620Wx2590Lx1000H

63.9)620Wx1740Lx1000H

64.Courtroom ‐ Criminal Bench:Providing and fixing Mild Steel bench with wooden powder coating as per reference design , drawing and instructions of engineer in charge.etc complete.

64.1)450Wx3000Lx900H w 450 seat height

64.2)450Wx2100Lx900H w 450 seat height

64.3)450Wx2600Lx900H w 450 seat height

64.4)450Wx2450Lx900H w 450 seat height

64.5)450Wx1800Lx900H w 450 seat height

65)Courtroom ‐ Criminal Dias Railing:Providing and fixing criminal dias railing as per design & drawing and instructions of engineer in charge.etc complete.

65.1)3050LX900HX15thk.

65.2)2775LX900HX15thk.

65.3)1740LX900HX15thk.

65.4)2360Lx900Hx15thk

66.Courtroom ‐ Judge's Chair:Supplying and placing chair of size750WX750DX1200H & 450 seat height and made of seasoned sheesham wood finished with melamine polish. Chair to be provided with armrest, seat & backrest to be cushioned & upholestered with faux leather fabric. Legs to be of 75x75mm with carving, 50mm wide & 20mm thk armrest at 600mm height with carving on backrest as per design & as per approval of engineer in charge.etc all complete.

67.Courtroom ‐ Public Seating: Providing and supplying 3 seater bench of Overall length not exceeding 1800mm (handrest‐ handrest), clear seat width not less than 450mm depth & width & not exceeding 650mm out‐to‐out, bottom to seat level 400‐450mm with arms at 600mm. Overall height 800‐ 900mm. with stainless steel structure of 304 grade with arms for each seat. Seat & backrest made of 8mm thk. bent ply or aluminium sheet with wooden powder coating. As per reference design& as per approval of engineer in charge.etc all complete.

68.Courtroom ‐ Witness Box:Providing and fixing court room witness box of size 1100Wx1200Lx1100H, as per design & drawing and instructions of engineer in charge.etc complete.As per dwg SF‐MC‐ID‐106‐107.

69.Pubic Waiting Bench:Supplying and placing three seater bench the individual seat size shall be 380±10 mm(D) X 520±10 mm(W), seat height = 420±10 mm, overall width = 1820±10 mm, overall depth = 680±10 mm & overall height = 800±10 mm.Bench shall be constructed from metal frame. The seat and back shall be made of high quality cold rolled MS sheet of 1.2m thick, pressed and welded to form the shape. The seat and back shall be electrostatically coated with 40‐60µ thick epoxy powder and then cured under heat to allow it to form a skin. The seat and back shall have round perforated sheet i.e. 4.5mm Dia. hole. The seat shall be supported on 2.5mm thick CRCA powder coated hinge which is mounted over MS pipe beam having cross‐section area 80mm X 40mm with 2mm thick. The armrest shall be made up of MS chrome plated sheet 1mm thick and armrest should be provided between each seat. The base or leg shall be made of 1mm thick CRCA chrome plated sheet. There shall be leveler shoe provided with metal insert at the bottom to avoid scratches on the floor.As per reference design& as per approval of engineer in charge.etc all complete.

70.Pantry Counter Storage::Providing,placing and fixingpantry counter storage as per design & drawing and instructions of engineer in charge.etc complete.As per dwg SF‐MC‐ID‐115

70.1)600Wx1500Lx900H

70.2)600Wx1430Lx900H

70.3)600Wx2000Lx900H

71.Pantry Storage Cupboard:Storage cabinet of size 600Wx1430Lx1800H and made in 19mm thk. Marine plywood BWP710 Grade of Century/ Anchor or equivalent make, finished in 4mm thk.app.laminate with internal shelving (5 divisions).As per reference design& as per approval of engineer in charge.etc all complete.

72.Pantry Overhead Store:Providing,placing and fixing pantry overhead store as per design & drawing and instructions of engineer in charge.etc complete.As per dwg SF‐MC‐ID‐115.

72.1)600Wx1500Lx900H

72.2)600Wx1430Lx900H

72.3)600Wx2000Lx900H

73.Full Ht. Storage: Providing and fixing Storage cabinet of size 600Wx2225Lx2400H and made in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor or equivalent make, finished in 4mm thk.app.laminate with internal shelving (5 divisions) as per design and instructions of engineer incharge.

81.Side Table (Common): Providing and placing Table of size required size made of seasoned sheesham wood finished with melamine polish with 75x75mm legs and binders & top in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. Veneer in approved color with PU finish as per reference design & as per approval of engineer in charge.etc complete.

81.1)450Wx450Lx500H

81.2)600Wx600Lx500H

82)Coffee Table (Common):Supplying and fixing Center tables of size 600Wx1000Lx500H with top in 6mm clear toughened glass of Saint Gobain or similar make and base in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. App. Veneer. & 50x50mm legs & edge frame in seasoned sheesham wood both finished in melamine polish.As per reference design & as per approval of engineer in charge.etc complete.

82.1)600Wx1000Lx500H

82.2)600Wx1600Lx500H

83)Meeting table: supplying and placing Table of size 1000Wx2500Lx750H and made of seasoned sheesham wood finished with melamine polish with 75x75mm legs and binders & top in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor or similar make, finished in 4mm thk. Veneer in approved color with PU finish as per reference design & as per approval of engineer in charge.etc complete.

84.Meeting Chair: Supplying & placing chair of size 650Wx650Dx900H w 450 ‐500 seat height and made of sheesham wood finished with melamine polish with cushioned seat and backrest upholstered in fabric of app. Rs 800/m of HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Nilkamal or similar make with guarantee of 10 years.As per design & as per approval of engineer in charge.etc all complete.

85.VC table: Providing and fixing Computer Table of size 600Wx1400Lx750H and made in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk.app.veneer as per reference design & as per approval of engineer in charge.etc complete.

86.Sofa ( Single seater)Judge's Dormitory:Supplying and placing a single seater sofa of size 750Dx1500Lx800H w 450 seat height and that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The armrest shall be flap with soft cushion on both side for aesthetically appealing as well as side comfort. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have MS powder coated frame having thickness 8mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing.etc. As per design & as per approval of engineer in charge.etc all complete.

87.Sofa ( Two seater)Judge's Dormitory: Supplying and placing a two seater sofa of size 750Wx900Lx800H w 450 seat height that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The armrest shall be flap with soft cushion on both side for aesthetically appealing as well as side comfort. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have MS powder coated frame having thickness 8mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing..etc As per design & as per approval of engineer in charge.etc all complete.

88.Coffee Table ‐ Judge's Dormitory: Supplying and placing Center tables of size 600Wx1200Lx500H with top in 6mm clear toughened glass of Saint Gobain or similar make and base in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. App. Veneer. & 50x50mm legs & edge frame in seasoned sheesham wood both finished in melamine polish..etc all complete.

89.Side Table ‐ Judge's Dormitory:Supplying and placing Side tables of size 4500Wx450Lx500H with top in 6mm clear toughened glass of Saint Gobain or similar make and base in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. App. Veneer. & 50x50mm legs & edge frame in seasoned sheesham wood both finished in melamine polish..etc As per design & as per approval of engineer in charge.etc all complete.

90.Dining Table ‐ Judge's Dormitory:Supplying and placing Dining table of size 900Wx2500Lx750H with wooden frame in melamine polish with white Italian marble countertop as per reference design & as per approval of engineer in charge.etc all complete.

91.TV Unit ‐ Judge's Dormitory:Supplying,placing & fixing TV Unit of size 500Wx1800Lx400H with rubberwood construct & tempered glass top in beige finish as per design & as per approval of engineer in charge.etcall complete.

92.Dining Chair ‐ Judge's Dormitory:Supplying,placing Solid wood dining chair of size 450W x 500D x 900H w 450 seat height in melamine polish with polyurethane upholstery in beige finish as per reference design of HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Nilkamal or similar make with guarantee of 10 years...etc all complete.

93.Bed ‐ Judge's Dormitory: Supplying,placing & fixing Bed of size 2100Lx900Wx400 H w headboard 2100L x 600H from bed and made in seasoned sheesham wood finished in melamine polish with 50mm dia tapering legs & 50mmx150mm edge band finished in 4mm thk. veneer of app. color with bed height 400mm.Headboard of size 2100L x 600W to be made in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make with foam‐filled 3"thk. plain padding & upholstered in fabric of app. Rs 800/m..etc all complete.

94.Wardrobe ‐ Judge's Dormitory: Providing & fixing Wardobe of various sizes to be made of 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make, finished in app. 4mm thk. Veneer from outside & 1mm thk. Greenlam or similar make laminate on the inside with 75mm high skirting.As per design & as per approval of engineer in charge.etc all complete.

94.1)600Wx1670Lx2400H

94.2)600Wx1565Lx2400H

94.3)600Wx1690Lx2400H

94.4)600Wx1800Lx2400H

94.5)600Wx1500Lx2400H

94.6)600Wx1615Lx2400H

95.Study Table ‐Providing & fixing Judge's Dormitory:Study table of size 330Dx880Lx880H Folded In ‐ 500Dx880Lx880H Folded Out made of Solid Sheesham Wood finished in melamine polish with folding mechanism as per reference design & as per approval of engineer in charge.etc all complete.

96.Study Chair ‐ Judge's Dormitory:Supplying and placing Study chair of size 500x500x800H w 450 seat height and made of solid rubber wood in melamine polish with foam cushioning and fabric upholstery of app. Rs 800/m as per design of HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Nilkamal or similar make with guarantee of 10 years ...as per reference design& as per approval of engineer in charge.etc all complete.

97.Night table ‐ Judge's Dormitory:Supplying and placing Nightstand of size 450Wx850Lx400H to be made in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor or similar make finished in 4mm thk. app. veneer in PU finish with 50mm skirting & 100mm deep drawers amd top in 6mm clear toughened glass of Saint Gobain or similar make..As per reference design& as per approval of engineer in charge.etc all complete.

98.Coffee Machine Table: Providing & fixing Console of size 600Wx1600Lx750H to be made in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make finished in 4mm thk. app. veneer in PU finish as per reference image& as per approval of engineer in charge.etc all complete.

99.Judge's Dormitory Pantry Counter Storage:Providing & fixing factory made pantry counter storage of required size with all necssary materials and fittings as shown in the drawing .As per reference image& as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐115

99.1)600Wx6685Lx900H

99.2)600Wx2000Lx900H

100.Judge's Dormitory Pantry Overhead Storage:Providing & fixing factory made pantry overhead storage of required size with all necssary materials and fittings as shown in the drawing .As per reference image& as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐115

100.1)300Wx6685Lx850H

100.2)300Wx2000Lx850H

102.Judge's Suite ‐ Night Table:Providing & fixing Night table of size 450Wx900Lx450H with 2 drawers to be made in 19mm thk. Marine plywood BWP710 Grade of Century or Anchor make finished on exterior in app shade of duco paint & internally in 1mm. Thk. White laminate of Greenlam or similar make.As per reference image& as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐110 T0 111

103.Judge's Suite ‐ Tv Uni: Supplying,placing & fixing TV Unit of size 450Wx1800Lx450H with rubberwood construct & tempered glass top in beige finish as per design & as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐111

104.Judge's Suite ‐ Dressing Table : Providing & fixing dressing table of size 600Wx2240Lx750H as per design & as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐111

105.Judge's Suite ‐ Wardrobe : Providing & fixingwardrobe of size 600Wx2600Lx3000H as per design & as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐112

106.Judge's Suite Pantry Counter: :Providing & fixing factory made pantry counter of size 600Wx2550Lx900H with all necssary materials and fittings as shown in the drawing .As per reference image& as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐112

107.Conference Room Table:Supplying & Placing conference table of required size Modular Unit in completely knock down conditions . The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The worktop shall be made up of 25mm thk. marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. Veneer & app. Shade of duco.The connecting top shall be made up of 25mm thick marine plywood BWP710 Grade of Century or Anchor make, finished in 4mm thk. Veneer & app. Shade of duco.The table top profile shall be in rectangle shape. Edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of the ply and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on 19mm thk. marine ply as specified. The end wall of the table on the side shall be topped by gable end. It should be 25mm thick marine ply and profile profile shall be in linear shape. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre‐laminated marine plywith appropriate PVC edge banding connected with both end. There shall be buffers provided at the bottom to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The manufacturer shall have quality and safety assurance like ISO‐9001:2015, ISO‐14001:2015 and ISO‐18001:2007, BIFMA membership and AIOTA certification. .As per reference image& as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐109 B (Mode Of Measurement- Area of table top)

108.Conference Room Speaker Table : Providing & fixing factory made Conference room speaker table of size 600Wx1800Lx750H made in 19mm thk. marine plywood BWP710 Grade of Century or Anchor or equivalent make, finished in 4mm thk. Veneer & app. Shade of duco.. .As per reference image& as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐109 B

109.Conference Room Credenza:Providing & fixing credenza of required size as per design & as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐109

109.1)600Wx7250Lx450H

109.2)600Wx5030Lx450H

110.MDB Cabinet : Providing & fixing MDB cabinet of of ize 600Wx2545Lx2400H as per reference design & as per approval of engineer in charge.etc all complete.As per dwg SF‐MC‐ID‐109

111.Stackable Chairs: Providing and placing Stackable chair of overall size 450WX750DX850H without arms with metal legs and leatherette upholstery of HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Nilkamal or similar make with guarantee of 10 years. as per reference image & as per approval of engineer in charge.etc all complete.

112.Muddemal Personel table: Providing and placing Table of size Main Table ‐ 750Wx1800Lx750H Side Table ‐450Wx900Lx750H Back Credenza‐ 300Wx1800Lx750H to be factory made n 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make with post form edges as per reference design.

113.Judge's Suite ‐ Dressing Chair:Providing and placing solid Wood Chair as per design with melamine polish of HOF furniture, Godrej, Featherlite, Exclusive, Arihant, Chairs & More, Nilkamal or similar make with guarantee of 10 years as per reference image & as per approval of engineer in charge.etc all complete.

114.CCTV Table:Providing and placing Table of size 750Wx1150Lx750H to be factory made n 19mm thk. marine ply BWP710 Grade of Century, Anchor, Greenlam or similar make with post form edges as per reference design & as per approval of engineer in charge.etc all complete.

115.Baby Crib:Providing and placing Crib in CP teak wood, duco painted of size800Wx1450Lx900H as per reference design & as per approval of engineer in charge.etc all complete.

Flooring

116.Aluminium Entrance Mat:C/S Pedismart recessed or surface mounted, either in a ramped frame or to butt level with a surrounding carpet. Carpet, vinyl or abrasive tread infills can be specified individually or in combination, along with our unique open or closed vinyl spline, which either allows waste to drop through or be retained in channels between the rails. With either option C/S PedismartTM rolls up for easy under‐cleaning.Aluminium ASTB221,Alloy 6063,plastisized PVC with relative density between 1.28 to 1.51 with hardness 86 to 88, Carpet 100% nylon & weight 688 grams/M2.

117.Sleek concrete ‐ Floor:Providing and fixing sleek concrete Kalinga stone artificial marble flooring of 18 mm thickness on floor in cement slurry including necessary grouting, as per reference design and drawing etc all etc complete as per instructions of engineer in charge

118.Raw concrete ‐ Walls:Dry Stone Cladding comprising of 12 mm thick Raw concreteKalinga stone artificial marble (shade approved by architect) fixed using undercut anchors of approved make to hold the Stonewith 10mm wide Closed joints with silicone sealant as joint filler,note that silicone compatibility is to be checked with the specified stone. If required, appropriate Primer/Sealer to be used prior to silicone application as per approved shop drawing and structural adequacy.The anchoring / bracing of the stone cladding to the RCC slab / beams / columns shall be done with non- corrosive brackets of approved design/ epoxy finish and including providing teflon shims of various thickness to adjust the beam level / line variations fixed with SS dash fasteners Hilti / Wurth make of min. 10mm dia. and depth of 50-80mm in the concrete and to withstand the dead load of the stone cladding as well as stresses due to wind pressure etc. Providing, drilling, hole cleaning & fixing ETA-approved A4 stainless steel Hilti HSU-R stone undercut anchor having CABR seismic 1:1 report. The required HSU ADT/MDT portable drilling machine, HSU CDB drill bit, and HSU IG check gauge to create the right undercut should strictly be adhered to as per manufacturer’s recommendation. Multiple pull-out tests must be conducted on installed HSU-R anchor (on stone panel) to determine anchor’s resistance, following which the required number of anchors per stone panel must be calculated. The HSU ST-G setting tool must be used to set the anchor. A suitable Aluminium/MS frame shall be manufactured and fixed to concrete using stainless steel Hilti HST3-R M10×90mm stud anchor and to brick/masonry using Hilti anchor HRD HR(2) M10×100mm (Depth & dia shall be decided based on the load requirement).Stone undercut anchor must have a red embedment mark to verify correct installation. The entire application shall be done as per the manufacturer’s specifications. Including Aluminium/MS frame and12mm thick Stone Cladding crema marfil Kalinga stone artificial marble etc complete

119.Crema Marfil ‐ Dry Stone Cladding comprising of 12 mm thick crema marfil Kalinga stone artificial marble (shade approved by architect) fixed using undercut anchors of approved make to hold the Stonewith 10mm wide Closed joints with silicone sealant as joint filler,note that silicone compatibility is to be checked with the specified stone. If required, appropriate Primer/Sealer to be used prior to silicone application as per approved shop drawing and structural adequacy.The anchoring / bracing of the stone cladding to the RCC slab / beams / columns shall be done with non- corrosive brackets of approved design/ epoxy finish and including providing teflon shims of various thickness to adjust the beam level / line variations fixed with SS dash fasteners Hilti / Wurth make of min. 10mm dia. and depth of 50-80mm in the concrete and to withstand the dead load of the stone cladding as well as stresses due to wind pressure etc. Providing, drilling, hole cleaning & fixing ETA-approved A4 stainless steel Hilti HSU-R stone undercut anchor having CABR seismic 1:1 report. The required HSU ADT/MDT portable drilling machine, HSU CDB drill bit, and HSU IG check gauge to create the right undercut should strictly be adhered to as per manufacturer’s recommendation. Multiple pull-out tests must be conducted on installed HSU-R anchor (on stone panel) to determine anchor’s resistance, following which the required number of anchors per stone panel must be calculated. The HSU ST-G setting tool must be used to set the anchor. A suitable Aluminium/MS frame shall be manufactured and fixed to concrete using stainless steel Hilti HST3-R M10×90mm stud anchor and to brick/masonry using Hilti anchor HRD HR(2) M10×100mm (Depth & dia shall be decided based on the load requirement).Stone undercut anchor must have a red embedment mark to verify correct installation. The entire application shall be done as per the manufacturer’s specifications. Including Aluminium/MS frame and12mm thick Stone Cladding crema marfil Kalinga stone artificial marble etc complete

120.Classic Beige ‐ Leather finish:Providing and fixing Classic Beige Kalinga stone quartz dry wall cladding of 15 mm thickness including necessary aluminium framework of minimum size 1.5" x 2", grouting, etc complete.Dry Stone Cladding comprising of Classic Beige Kalinga stone quartz dry wall cladding of 15 mm thickness (shade approved by architect) fixed using undercut anchors of approved make to hold the Stonewith 10mm wide Closed joints with silicone sealant as joint filler,note that silicone compatibility is to be checked with the specified stone. If required, appropriate Primer/Sealer to be used prior to silicone application as per approved shop drawing and structural adequacy.The anchoring / bracing of the stone cladding to the RCC slab / beams / columns shall be done with non- corrosive brackets of approved design/ epoxy finish and including providing teflon shims of various thickness to adjust the beam level / line variations fixed with SS dash fasteners Hilti / Wurth make of min. 10mm dia. and depth of 50-80mm in the concrete and to withstand the dead load of the stone cladding as well as stresses due to wind pressure etc. Providing, drilling, hole cleaning & fixing ETA-approved A4 stainless steel Hilti HSU-R stone undercut anchor having CABR seismic 1:1 report. The required HSU ADT/MDT portable drilling machine, HSU CDB drill bit, and HSU IG check gauge to create the right undercut should strictly be adhered to as per manufacturer’s recommendation. Multiple pull-out tests must be conducted on installed HSU-R anchor (on stone panel) to determine anchor’s resistance, following which the required number of anchors per stone panel must be calculated. The HSU ST-G setting tool must be used to set the anchor. A suitable Aluminium/MS frame shall be manufactured and fixed to concrete using stainless steel Hilti HST3-R M10×90mm stud anchor and to brick/masonry using Hilti anchor HRD HR(2) M10×100mm (Depth & dia shall be decided based on the load requirement).Stone undercut anchor must have a red embedment mark to verify correct installation. The entire application shall be done as per the manufacturer’s specifications. Including Aluminium/MS frame and12mm thick Stone Cladding crema marfil Kalinga stone artificial marble etc complete

121.Emperador Scuro ‐ Border: Providing and fixing Emperador Scuro Kalinga stone artificial marble flooring of 18 mm thickness on floor in cement slurry including necessary grouting,as per reference design and drawing etc all complete as per instructions of engineer in charge

122.Colosseo ‐ Walls:Providing and fixing colosseo terrazzo collection Kalinga stone artificial marble of 12 mm thickness for dado work in cement slurry including necessary grouting, as per reference design and drawing etc all complete as per instructions of engineer in charge

123.Imperiale ‐ Floor:Providing and fixing Imperiale Terrazzo Collection Kalinga stone artificial marble flooring of 18 mm thickness on floor in cement slurry including necessary grouting, as per reference design and drawing etc all complete as per instructions of engineer in charge

124.Carpet Tile:Providing and fixing Tufted low level loop pile carpet tile Primary backing Polyester from CCIL Teressa or similar as per reference design and drawing etc all complete as per instructions of engineer in charge

Sugamya Bharat Items

125.Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete of make Hindware(Matrix series 70002)/ Cera or equivalent as per the direction of Engineer-In-charge.

126.Providing and fixing ISI marked double swing flush door shutters conforming to IS :2202 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel L- hinges with necessary screws Fittings & Fixtures per leaf SS kick plates on both sides of the door of 300mm height Heavy Duty satin finish butt SS Hinges (100mm x 75mm x 3mm in size) -4 nos. SS finished lever handle with mortise lock- 1 no. Floor spring-1 No. 100mm x 100mm safety glass at the specified location

127.Providing and applying blue and white coloured thermoplastic road marking paints for marking a 3ft x 3 ft universal accessibility symbol within the parking bay as per the drawings and up to the satisfaction of the engineer in charge.

128.Acrylic tactile audio map :Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorial building layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge

129.Directional signage :Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6" x 9" designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge.

130.Floor Directories Providing and fixing acrylic multilingual Braille (raised dots)ADA compliant modular floor directories system on all floors of size1.5' x 2' , showing the floor plan and the list of rooms on that floor, to be installed on each floor near the staircase, designed as per standards and having 4mm thick blue acrylic base plate with Upper Case San Serif words and symbols made of white acrylic non glare cut out letters of height 20mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each directory to be fixed as per manufacturers specifications on the wall at the approved location at a height of 1200mm from FFL and as per the directions by the engineer in charge.

131.Providing an ADA compliant Disability Service Desk having a lowered portion (800mm from FFL) and leg space of 450 mm, having the approved design and of the approved make as per manufacturers specifications

132.Providing and fixing SS-304 studs having 35mm dia. of the approved brand and make inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using the necessary adhesive including finishing work up to the satisfaction of the engineer in charge complete.

133.Providing and fixing SS-304 strips of size 280mm x 35mm of the approved brand and make inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using the necessary adhesive including finishing work up to the satisfaction of the engineer in charge complete.

134.Providing and fixing Braille indicators for handrails of the approved design and make having Braille dots raised 0.5mm above base plate, to be installed at the specified locations as per the directions of the engineer in charge

135.Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92 kg / r. metre

136.ADA compliant modular Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying "YOU ARE HERE" of 15mm height letters in red with white background, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters no less than 3/4" in height. The size of the board shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be oriented to the position of the viewer as per the direction of the site engineer

137.Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system

138.Supplying and installing of in position the signages " FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive vinyle painted foam board of 3' x 4'.Product to be ADA compliant and modular system.

139.Providing an emergency evacuation chair of the approved design, weight and loading capacity

140.Providing and fixing the reader of the approved brand and make as per the manufacturers specifications and as per the directions of the engineer in charge

141.Providing and fixing the transmitter of the approved brand and make on each floor as per the manufacturers specifications and as per the directions of the engineer in charge

142.Providing and fixing SS Braille buttons in the elevator of the approved brand and make to be installed using the specified adhesive and as per the instructions given by the manufacturer

143.Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand as per the direction of engineer in charge

144.Providing a folding wheelchair of Pioneer Surgicals Brand, model no. PS 809/ equivalent make as per the directions of the engineer in charge.

145.Design, supply, fabrication and fixing of SS, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2mm thick SS non glare base plate and Grade 2/ Grade 1 Braille (raised dots)to be etched/ engraved and be raised 0.5mm above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per accessibility standards and up to the satisfaction of the engineer in charge.

146.Design, supply, fabrication and fixing of SS, non glare multilingual Braille (raised dots) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building. Having 1.2mm thick SS non glare blue coloured base plate with the 'Universal Accessibility Symbol' and Upper case Sans Serif words of height 15mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 15mm in white colour. Grade 2/ Grade 1 Braille to be etched/ engraved and be raised 0.5mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge.

147.Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment)of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge

148.Providing and laying in place 300mm x 300mm x 9.8mm vitrified tactile warning and directional tiles of the approved brand, make and colour inside the buildings at in all corridors and lobbies, level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer including zarri making wherever required and finishing including grouting the joints with white cement with matching pigments etc. up to the satisfaction of the engineer in charge complete.

149.Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) signboards of size 6"x 9" for room titles, designed as per the drawings issued and having 4mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate.Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL and as per the directions by the engineer in charge.

150.Providing and fixing in place 300mm x 300mm x 3mm polyurethane stick on tactile directional tiles and warning tiles having beveled edges and of the approved brand, make and colour and conforming to ISO 23599: 2012 inside the building on all floors in corridors, lobbies , level differences as per accessibility standards and to be installed as per the installation instructions given by the manufacturer using butyl rubber adhesive and the hardware specified by the manufacturer, as per the direction of the engineer in charge complete.

151.Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make.

152.Providing and Fixing Accessible Wayfinding and navigation signage systems - Providing and fixing in location as diected by Engineer in Charge, accessible modular wayfinding and navigational signage system comprising of ADA and Harmonised Guidelines compliant sigange and wayfinding elements, in multilingual, tactile and braille format. Sigange systems to be designed for entire building / complex under consideration

Ceiling

153.Gypsum Ceiling with/without cove-Gyproc-Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards, screwed/ fixed to the under structure of suspended G.I Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50mm maximum centre to centre distance of 600mm perimeter channel and intermediate channels at maximum centre to centre distance of 1200mm galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necesssary scews. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermadiate channel should be fixed to strap hangers for additional support to prevent strapping at every 1200mm item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs and including labour, material etc. complete.

154.Providing and Fixing Suspended Metal Ceilings manufactured by Armstrong Ceilings in Hook-on system (R-H 200) with Rectangular panels made out of 1.0mm thick Aluminium in width of approx. 300mm, length ranging from 1100mm to 2400mm.General Specifications:Entire system to be designed suitable for Green Building Application for Interior applications, and concealed Grid, Butt joint panels.Panel Specifications:The R-H 200 rectangular Hook-On panels to be made of Aluminium (Grade A3003), minimum thickness 1.0 mm, and recycled content of 25%. The panel Length varies between 1100mm to 2400mm, panel Width of approx. 300mm, with Square Edge having 3mmx8mm black foam gasket, on one long and one short side.The panel surface to be powder coated (post coat) to 60-80µ on visible side after mechanical production, low gloss (degree of gloss approx. 20%). Scrubbable, architectural-quality, electrostatically applied polyester powder coat paint applied to entire panel after forming (post coat). Panel coated on both sides for exterior application.The color to be approved Wood Grain finish (Polyester for Interior). The panels to be perforated in Micro-perforations (Rd1518) having 1.5mm dia. round holes diagonal 45° perforations, 18% open area, having non-woven black fabric acoustical Inlay of Soundtex Fleece. The Sound absorption would be 0.7NRC.The panels to be Fully Accessible, with system height of 98mm, and would require a plenum height of a minimum 450mm clear space from bare ceiling / rigid structure. Suspension System Specifications:Primary Runners would be GI U-Profile of 30mm(H) x 3746mm(L) x 20mm(W) x 1.5mm(T), roll formed slotted profile.Secondary Runners would be GI J-Bar of 44.7mm(H) x 3000mm(L) x 30mm(W) x 1mm(T), roll formed ribbed profile Accessories would include J-Bar Hangers, U-Profile Splice (GI), J-Bar Splice (GI), Universal Wall Anchor (GI), Plug-in Clip (spring steel), Pressure Spring (St. Steel), Clamping Bracket (GI).Wall Molding would include 19mmx19mm GI L-wall angle, post-coated to approved Wood Grain finish.Suspension would be M6 GI threaded rod (2000mm L) / 2.5mm GI hanger wire (2000mm L). Installation Specifications: Primary and secondary runners Installation: U-Profiles, spaced at 1200mm, to be suspended from ceiling using clamping brackets and threaded rods OR hanger wires. Hanger wires must be wrapped tightly with 3 full wraps. The J-Bars (directional) shall intersect the U-profile at 90° at every module dictated by the panel length. The J-Bar is connected to the U-profile with a J-Bar hanger and secured to the matching square U-Profile slots using plug-in clips. Self-tapping screws to be used when square U-Profile slots do not match the hangers. The U-profiles and J-Bars be fastened to two adjacent walls using the wall anchor and bolts. U-Profiles and J-bars to be at a maximum distance of 450mm (max.) to a perimeter wall or outside edge of a floating module. To join two pieces of continuous U-profiles and J-Bars, a U-Profile splice and J-Bar splice to be used respectively. Panel Installation:Full size metalworks R-H 200 panels (directional) to be hooked on to the J-Bars (in accordance with the shop drawings) along the short side (typical). Field-cut Panels:Perimeter panels that require field cutting to fit on a wall trim option must have a minimum of 12mm edge resting on the horizontal surface of the wall moldings. Wall Moldings:19x19 wall angle to be fastened to the perimeter using screws, at every 450mm to 600mm L.The system used together should carry a 30 year warranty.

155.Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Ultima+ Microlook 90 Edge Tiles With Armstrong Silhouette 15mm Exposed Grid.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ≥85%, Thermal Conductivity k = 0.045 - 0.048 W/mK, Colour White, Fire Performance BS 476 Class 0/Class 1 in module size of 600 x 600 x 19mm with Durabrite scrim on the face of the tile, suitable for Green Building application, with Recycled content of 36%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 7.90 Kgs/M2 (as per standard installation layout mentioned below) & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 30 year warranty. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum pull strength of 110 kgs. (Adjustable hook clips of 0.7mm thick, galvanized spring steel can also be used for installation purpose as an additional accessory. The adjustable clip also consists of a 4 mm aquiline wire to be used with the main runner).

156.Hexagonal/Round Ceiling-Providing and fixing hexagonal and round shapes of size1200x1200mm Armstrong SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panels with Humidity Resistance RH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by the Architect / Engineer in charge (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef / Lagoon). Armstrong or equivalent make and necessary metal work of Armstrong or equivalent make as per requirement and Drawings of the architect etc commplete as per instructions of engineer in charge.

157.Providing & Fixing true horizontal level suspended ceiling comprising of Armstrong AL Clip-in with double pip self-leveling feature and special tabs to allow removal of tile to enable plenum access with plain visual consisting of 600x600mm clip in tiles of Aluminium in 0.7 mm thickness with bevel edge in White colour. The tile shall be powder coated to White color having powder coat thickness ranging from 60-80 microns. The tiles would have Fire Performance of Class 0/Class 1 as per BS476 Part 6 & 7 standard in module size of 600x600mm.Installation: : To comprise 3000mm long ‘C’ channels spaced at 1200mm centers securely fixed to the structural soffit using threaded rod (Approved make/Third Party Supply) connecting C- channel hanger at 1200mm C/C and anchor fastener (Approved make/Third Party Supply). The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector for splicing two pieces of C-channels. 4000mm DP-12 Main carriers (spring tee bars) shall be spaced at 600mm centers in a direction perpendicular to the C-channels and shall be secured at every intersection with C channel using a DP-12 hanger. Use DP-12 connector to splice two pieces of DP-12 main carriers. Tiles should be clipped in between two DP-12 carriers (spring tee bars) from below. This is a downward installation. Security clip to be installed to ensure the panels are positively engaged with DP12 channel. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.Perimeter trims to be of Armstrong wall angles of size 3000x19x32mm in white color secured to walls at 450mm maximum centers. Cut tiles to be secured to the wall angles using a spring clamp. as per requirement and Drawings of the architect etc commplete as per instructions of engineer in charge.

Railing

158.Clearline Glass Railing System: Providing and fixingToughened extra clear glass 12 mm thk saint gobain or similar make, 50 mm dis stainless steel rod of Ozone or similar make, stainless steel bottom rail of 150 x 50 mm of Ozone or similar make including all necessary fittings etc all complete as per drawing and instructions of engineer incharge.

FAÇADE WORK

159.1)Semi unitised curtain wall Glazing system

159.2)Vision Glass : 23MM THK. DGU GLASS (6MM HS +12MM AIR GAP+5MM TOUGNED ) including of Landing on site, Wastage and Breakage of the Glass.etc Glass of saint gobain SKN 454

159.3)Spandrel Glass : 6MM THK. SGU GLASS including of Landing on site, Wastage and Breakage of the Glass.etc Glass of saint gobain SKN 454

159.4)Providing and fixing the spandrel Insulation with the Glass wool insulation of 50mm thick 48 kg/m3 density slab with side factory laminated 50 gsm black/grey veil of 0.5 mm, firmly held on the GI tray of 1.2 mm thickness and colour matching as per arch. requirement in line with the Tender Drawing.The assembly is kept atleast 50mm away from the glass surface. Insulation shall be retained by aluminium clips, aluminium straps, galvanized steel straps, pins with retaining disks or integral pockets within the unit frames. Maximum spacing of clips and straps shall be 400mm c/c. Adhesive attachment of insulation is not permitted. Provide sufficient insulation support to prevent sagging Insulation shall be fixed on the tray with clips.

159.5)Providing and fixing the fire stop for 2 hour Fire rating with smoke seal at all floor slab levels required as per local fire authority. 100mm thickness & 100 Kg/m3 density of Rockwool slab with 1.2mm GI flashing to hold the assembly shall be fixed in compressed form between the gap of Building RCC and The floor closure shall be provided continuously at floor level with 1mm thk GI flashing fixed with fire rated Anchors of Hilti make. Closing gap between transom and building line with minimum of 10mm gap filled with smoke seal in tumescent and fire stop acrylic spray system with 50% movement capability (UL tested as per ASTM E 2307 standards) assembly around the entire building periphery between the RCC structure and curtain wall at floor level comprising of G.I clips @ 300mm c/c along with rockwool of 100Kg/m³ density & minimum 100 mm thick compressed and sandwiched between the Spandrel Back pan & RCC) held in a 1.2mm thk. GI tray and covered by a top lid of 1mm thk. GI flashing to be fixed using XP/ XC Gas nails and GX3 tool or equivalent and sealed over perimeter firestop Acrylic spray to provide minimum 2 hrs of Fire, smoke leakage and movement Rating when tested as per ASTM E 2307 standards .Approved Make: Hilti (CFS SP WB FIRESTOP ACRYLIC SPRAY SEALANT) Approved Make:Roxul Rockwool-Safe n Silent Pro 380

159.6) Design, Fabrication, Installation, Protection, Cleaning and Handover of Side Hung Window.Side hung window shall include aluminium sub-frame around the perimeter with openable casement sashes fixed with SS friction stay, restrictor and handle with lockset. Use hardware of Giesse / Alualpha Make only. Giesse / Alualpha Make "L" Type Restrictor will allow opening of sash upto specified angle.Complete with interface details, sealants and brackets screws and necessary SS anchors. Alum. finish Internal / external : High Performance powder coat comply with AAMA 2604 with 15 years min warranty. . (The quote rate shall also only Include Window Hardware and Accessories).Glass area covered in item a.2.

159.7) Providing and fixing Vertical Fin of size 100mmx100mm and thickness as per Structural Calculation as per the drawings, duly held on Al. bracket fixed rigidly to the Aluminium members with necessary fasteners in SS 316. The capping shall be made out of extruded Aluminium Alloy 6063 T6 grade & all Profiles directly exposed to UV rays have to be in PVDF finish with minimum 35 micron confirming to AAMA 2605 – 2 and Internally visible surfaces to be in SDF finish confirming to AAMA 2604, shade shall be as per Client's and Architect's requirement

159.8)Providing and fixing Horizontal Fin of size 100mmx300mm and thickness as per Structural Calculation as per the drawings, duly held on Al. bracket fixed rigidly to the Aluminium members with necessary fasteners in SS 316. The capping shall be made out of extruded Aluminium Alloy 6063 T6 grade & all Profiles directly exposed to UV rays have to be in PVDF finish with minimum 35 micron confirming to AAMA 2605 – 2 and Internally visible surfaces to be in SDF finish confirming to AAMA 2604, shade shall be as per Client's and Architect's requirement

WALL TYPE 2 - ENTRANCE GLAZING

160)The Aluminium Frame Double Leaf / Single Leaf Door shall comprise of 3- sided aluminium outer frame with a sub / shutter frame on the perimeter of the door of Jindal / Bhoruka make as per the approved Tender drawings with S.S 304 hardwares of Alualfa/Giesse/Kinlong make. The glass shall be 23mm Thk DGU glass as per design parameters and approved shade. Rate shall include fixing of the main frames to the masonry surface/curtain wall with necessary clamps, fastening straps, nuts, bolts, washers and other fastening material. Provide exterior perimeter sealants of approved make where the glazing abuts other adjacent materials such as concrete shear walls. The contractor must design the system as per the prevalent site conditions and building elevation profiles. Quote rate for complete system. (The quote rate shall also only Include Window Hardware and Accessories).Glass area covered in item b.1

WALL TYPE 3 - : STONE CLADDING

161.Dry Stone Cladding comprising of 18-20 mm thick stone (shade approved by architect) fixed using undercut anchors of approved make to hold the Stonewith 10mm wide Closed joints with silicone sealant as joint filler,note that silicone compatibility is to be checked with the specified stone. If required, appropriate Primer/Sealer to be used prior to silicone application as per approved shop drawing and structural adequacy.The anchoring / bracing of the stone cladding to the RCC slab / beams / columns shall be done with non- corrosive brackets of approved design/ epoxy finish and including providing teflon shims of various thickness to adjust the beam level / line variations fixed with SS dash fasteners Hilti / Wurth make of min. 10mm dia. and depth of 50-80mm in the concrete and to withstand the dead load of the stone cladding as well as stresses due to wind pressure etc. Providing, drilling, hole cleaning & fixing ETA-approved A4 stainless steel Hilti HSU-R stone undercut anchor having CABR seismic 1:1 report. The required HSU ADT/MDT portable drilling machine, HSU CDB drill bit, and HSU IG check gauge to create the right undercut should strictly be adhered to as per manufacturer’s recommendation. Multiple pull-out tests must be conducted on installed HSU-R anchor (on stone panel) to determine anchor’s resistance, following which the required number of anchors per stone panel must be calculated. The HSU ST-G setting tool must be used to set the anchor. A suitable Aluminium/MS frame shall be manufactured and fixed to concrete using stainless steel Hilti HST3-R M10×90mm stud anchor and to brick/masonry using Hilti anchor HRD HR(2) M10×100mm (Depth & dia shall be decided based on the load requirement).Stone undercut anchor must have a red embedment mark to verify correct installation. The entire application shall be done as per the manufacturer’s specifications. Including Aluminium/MS frame and Stone Cladding 30mm Thk Granite etc complete

WALL TYPE 4- : GRC CLADDING

162.Design, Fabrication, Installation, Protection, Cleaning and Handover of GRC Cladding (i.e. Glass fiber Reinforced Concrete) is a mixture of cement, fine aggregate, water, chemical admixtures and Alkali resistant Glass fibers former to make a mould Cake is then put through a time / temperature regime to cure the size.The Supplier shall provide standard mentioned in the GRC Manual . The product finish shall be pre-fabricated in the factory. The design shall accommodate SS 316 grade fasteners and anchor bolts of approved make, teflon/ nylon separators to prevent bi-metallic contacts, all in complete required to perform as per drawing in conjunction with BOQ. Quote rate for complete system including GRC as mentioned.

WALL TYPE 5- : MS Grill

163.Design, Fabrication, Installation, Protection, Cleaning and Handover of Mild Steel Grill of shape as per Architect's / Client's Approval.The MS Grill shall be installed behind the facade as shown in the Tender Drawings and secured on all sides to the RCC Structure with approved hardware. The member sizes shall be as per the Tender Drawings. The Mild Steel used for the Grill shall have Powder Coated finish.

WALL TYPE 5- : ACP Canopy

164.Design, Engineer, Furnish, Fabricate,package, deliver (to jobsite) and Install: 4mmThk. Aluminium Composite Panel (ACP) Cladding supported on Horizontal and vertical aluminium framing members shall be bolted to the welded MS brackets. Framing members and brackets shall be supported (Welded) from the built up MS structure as indicated in the Tender drawings.ACP sheet panel tray shall be fixed mechanically with aluminium cleat and rivets.The vertical and horizontal groove joints shall be sealed with weather silicone of approved make.The 4mm thk ACP consists of 0.5mm outer skin of Aluminium with Lumiflon based fluorocarbon paint or kynar 500 based PVDF paint confirming to AAMA 2605 + 3mm FR Grade mineral core material (FR Grade Class B as per EN 13501) + 0.5 mm aluminium skin with service coat. include primary seal of 1.5 mm thick G.I. Sheet with water proofing membrane. The fastening materials like Anchors, Nuts, Bolts, Rivets, washers, clamps, straps etc required for fixing the framing members to the Structure/ masonry wall/ RCC surface shall be of stainless steel 316 grade and corrosion resistant.

Organic waste Composting System

165.Providing & fixing organic waste composting system of 325kg/ day capacity of EcoComposter ECM-30 or equivalent with succesful installation and operations etc all complete. Organic waste composting machine ‘‘ECM-30’ or equivalent having 60 lit container capacity, with All contact parts in SS 304.Main Motor 3 Phase, 415 V AC, 2 HP, 1440 RPM, Foot mounted Chopper Motor 3 Phase, 415 V AC, 1 HP, 2880 RPM, Flange mounted , Gear box reduction ratio 10:1,Arrangement for m/c movement 4” Castor wheels (2 swivelling & 2 fixed) ,Arrangement for material movement Trolley with 3” Castor wheels,Overall Dimensions 1500 x 800 x 1100 (L x W x H in mm), Approximate Net Weight 300 Kg Compost Curing System comprising of the following,: Fabricated rack in M.S. material Size 12’ L * 2’ W * 8’ H, duly Painted / powder coated in Oxford blue / Azure blue shed., Fabricated rack in M.S. material Size 12’ L * 4’ W * 8’ H, duly Painted / powder coated in Oxford blue / Azure blue shed.,Plastic crates with Perforations, size, 540 mm × 360 mm × 300 mm,with. 150 Nos. with green nets.

Water treatment plant

166 )Providing, fixing , installing potable water treatment plant of 9000 lph capacity by reverse osmosis process.. As per detailed specifications and design provided and as per instructions of engineer in charge..with all things completed till starting the operation.

Miscellenious Items

167)Documentary or Project Film (Duration 3 to 7 minutes) on regular basis for public works department, Government Of Maharashtra Project of works costing, specification and description as below.

167.1)Script and Visulaization :- Preparation of script and visulization based on the brief given by the deptt., making necessry modification / changes based on the comments and finalization.

167.2)Shooting :- Carrying out shooting HDV format for a shift of upto 8 hours per day at project location in Maharashtra inclusive of the camera set up, standard lights (2 nos. sun gun), Lapel mic, other cables and accessories, cameraman, camera attendent, director etc. and inclusive of travelling charges for shooting unit from mumbai to the project location and back.

167.3)3) Post Production :- a) Editing :- Editing of shooting rushes for production of a film of 3 to 7 minutes duration inclusive of editing studio, editor, miscellenous expensive etc. b) Graphics, Animations, Titles and Supers :- Creation of standard graphics and animations based on the soft copies of the drawing given by the deptt., titles and super as per the requirement of script etc. c) Voice Over (English) :- Recording of Voice Over (English) for the film with professional VO Artist at a Digital Audio Studio. d) Background Music :- Providing appropriate background music for the films as per the requirement. e) Mixing and Mastering :- Final mixing of the Voice Over with Music for the preparation of the mixed master of the film in required format. f) Creative charges :- Charges for directional and creative inputs. g) Compressed Version :- Charges for preparation of compressed version of the film for Propagation through web sites and social media inclusive of re-rendering and mastering of the film to fit the required size.

167.4)Providing and installing Nylon net for protection from Birds entry in Entrance Lobby.

168)Providing & fixing modular Kitchen having the Equipments mentioned in the chart (ANEXURE Below given List ) attached with numbers and specifications including all necssary fittings as shown in the drawing etc complete.

SR. NO. DESCRIPTION

INDIAN KITCHEN

PW)POT WASH AREA

1.S.S POT STACKING RACK 1200x600x1500

REF.REFRIGERATION AREA

1.4 DOOR VERTICAL CHILLER 1400x800x2000

2.4 DOOR VERTICAL FREEZER 1200x800x2000

3.CHEST FREEZER 1350x700x850

MAIN KITCHEN AREA

1.UTILITY RACK - 3 SHELF 900x450x1800

2.HELPING TABLE WITH 2 U/S 1800x650x850+100

3.HELPING TABLE WITH 2 U/S 1500x650x850+100

4.WALL SHELF 1500x300

5.SPREADER TABLE WITH 2 U/S 600X600X850+100

6.THREE INDIAN BURNER RANGE 1800x600x850+100

7.SINGLE SINK UNIT 600X600X850+100

8.SINGLE STOCK POT RANGE LOW HEIGHT 600x600x600

9.S.S TANDOOR GAS OPERATED 750x750x850+100

10.TANDOOR TABLE 600x750x850+100

11.SINGLE SINK UNIT 600X600X850+100

12.WORK TABLE WITH 2 U/S 600x750x850+100

13.DOSA MACHINE TABLE TOP DIA 400 MM

14.PIZZA OVEN SINGLE 400x400x15

15.IDLY STEAMDER -36 IDLIES CAP 36 IDLIES

16.TWIN FRYER 600x750x850+100

17.S.S EXHAUST HOOD WITHOUT HANGING,DUCTING & SUCTION SYSTEMS 2800x1000x500

18.WORK COUNTER WITH 2 OVER HEAD SHELVES 1400x750x850

19.UNDER COUNTER CHILLER WITH 2 OVER HEAD SHELVES 1800x750x850

FOOD SERVICE AREA

1.WORK COUNTER WITH TRAY SLIDE ATTACHMENT (WITH GN PANS LIDS) 750x700+300x850

2.HOT BAIN MARIE COUNTER WITH TRAY SLIDE ATTACHMENT ( WITH GN PANS LIDS) 1800x700+300x850

3.COLD BAIN MARIE COUNTER WITH TRAY SLIDE ATTACHMENT (WITH GN PANS LIDS) 750x700+300x850

PREPARATION AREA

1.4 DOOR VERTICAL CHILLER 1400x800x2000

2.4 DOOR VERTICAL FREEZER 1200x800x2000

3.WORK TABLE WITH 2 U/S 1500x600x850+100

4.MICROVEN

5.VISI COOLER 700x700x1800

STORE AREA

1.M.S RACK 1200x600x1500

169.Carrying out Std. consistency, fineness Sp. Gravity, setting time, compressive strength. Soundness Test on Cement with a frequency of one bag of 50 Kg. out of the 50 tonnes in Govt. P.W.D. laboratory as per relevant b.i. standards and submitting test results and retesting if required. Including taxes. Overheads and any other allied charges etc. complete (1/587)

170.Carrying out crushing value/ compressive strength water absorption and specific gravity of Stone/rubble (Including all type of natural stones such as kotah/ marble/ granite/ kadappah etc.) in Govt. P.W.D. laboratory as per relevant B.I. standards and submitting test results including taxes. overheads and any other allied charges etc. complete. One Test (15/587)

171.Carrying out Compressive Strength of cement/mortor/micro concrete cubes as per frequency mentioned in I.S.456-2000 in Govt. P.W.D. laboratory as per relevant B.I. standards and submitting test results including taxes. overheads and any other allied charges etc. complete (27/588)

172.Carrying out Moisture content. Density and Compressive Strength Test on Teak wood with frequency of 1 test per each source in Govt. P.W.D. laboratory as per relevant B.I. standards and submitting test results including taxes. overheads and any other allied charges etc. complete (59/590)

173.Carrying out thickness. Determination of density /moisture content/ resistance to dry heat and glue adhesion test on Plywood in Govt. P.W.D. laboratory as per relevant B.I. standards and submitting test results including taxes. overheads and any other allied charges etc. complete. (61,62/590)

174.Carrying out determination of density /moisture content Test on Particle board in Govt. P.W.D. laboratory as per relevant B.I. standards and submitting test results including taxes. overheads and any other allied charges etc. complete.(63/590)

175.Carrying out thickness mass per running meter and powder coating test on Aluminum section in Govt. P.W.D. laboratory as per relevant B.I. standards and submitting test results including taxes. overheads and any other allied charges etc. complete. One Test (64,65/590)

Godrej and Boyce Mfg. Co. Ltd.

SIDDHI CONSTRUCTION

Shubham Civil Projects Pvt. Ltd.

Generic Engineering Construction and Projects Limited

Swati Interiors

Eleganz Interiors Pvt. Ltd.