REPAIRS/ REPLACEMENT OF STREET LIGHT AND OTHER MISC WORK AT ASD, BSD, CSD, DSD, ESD, FSD, CBU AND PERIMETER AREA UNDER GE PULGAON

Dismantling of existing street light fittings, including disconnecting of wiring for all types and wattages of street lights/flood lights from pole or wall.Repairing and replacing unserviceable parts, re-fixing the same on pole/wall after testing, including removal of carbon from line jumpers, tightening of jumpers, and proper alignment of fittings.The work also includes attending defective street lights/security lights/flood lights/LED lights installed on electric poles, complete in all respects, as directed by the Engineer-in-Charge. Note: Spare parts and accessories such as LED drivers and other connected items shall be measured and paid separately under respective supply items. Fixing of these components is deemed to be included in this item.

Supply only LED street light Driver for 45 Watts LED street light fitting as per make given all as specified and directed by EIC.

Supply only LED street light Driver for 60 Watts LED street light fitting/ Flood light as per make given all as specified and directed by EIC.

Supply only LED street light Driver for 100 Watts LED street light fitting/ Flood light as per make given all as specified and directed by EIC.

Supply, installation, testing and commissioning of 45 Watt LED street light fitting for repair/replacement, comprising of pressure die-cast aluminium housing with system efficacy not less than 123 lumens/Watt (minimum 5570 lumens output).The luminaire shall be equipped with high power LEDs (1W to 3W) with modular lens for batwing light distribution (30° x 60°). The fitting shall operate on an input voltage range of 140V AC to 270V AC.The luminaire shall have an embossed brand name and shall be provided with a potted LED driver with minimum 4kV internal and 5kV external surge protection. The driver shall have short circuit, open circuit, over-voltage and under-voltage protection.The fixture shall withstand voltage up to 440V for 8 hours, and shall be IP66 protected, with THD < 10%, Power Factor > 0.9, CRI > 70, and CCT 5700K ± 300K. Driver efficiency shall be minimum 85%.The luminaire shall be tested as per LM-79 from a NABL accredited laboratory.The work includes dismantling of existing unserviceable fittings, and providing & fixing the new fitting with adjustable bracket/house, including all required hardware for proper installation.The complete LED street light fitting shall be covered under a comprehensive on-site warranty of 5 (five) years.Complete in all respects as specified and as directed by the Engineer-in-Charge Cat. Part No.: 423-45-57-SL-NS-GL-NSG Makes: Philips / Wipro / Crompton

Supply, installation, testing and commissioning of 60 Watt LED street light fitting for repair/replacement, comprising of pressure die-cast aluminium housing with system efficacy not less than 110 lumens/Watt (minimum 6670 lumens output).The luminaire shall be equipped with high power LEDs (1W to 3W) with modular lens for batwing light distribution (30° x 60°). The fitting shall operate on an input voltage range of 140V AC to 270V AC.The luminaire shall have an embossed brand name and shall be provided with a potted LED driver with minimum 4kV internal and 5kV external surge protection. The driver shall have short circuit, open circuit, over-voltage and under-voltage protection.The fixture shall withstand voltage up to 440V for 8 hours, and shall be IP66 protected, with THD < 10%, Power Factor > 0.9, CRI > 70, and CCT 5700K ± 300K. Driver efficiency shall be minimum 85%.The luminaire shall be tested as per LM-79 from a NABL accredited laboratory.The work includes dismantling of existing unserviceable fittings, and providing & fixing the new fitting with adjustable bracket/house, including all required hardware for proper installation.The complete LED street light fitting shall be covered under a comprehensive on-site warranty of 5 (five) years from the date of installation.Complete in all respects as specified and as directed by the Engineer-in-Charge .Cat. Part No.: 421-60-57-SL-LM-NSG Makes: Philips / Wipro / Crompton

Supply, installation, testing and commissioning of 100 Watt LED flood light fitting for repair/replacement, suitable for outdoor application, operating on 230V AC supply, with CCT 6000K.The luminaire shall be of pressure die-cast aluminium housing with efficient thermal management and system efficacy not less than 110 lumens/Watt.The fitting shall be equipped with high power LEDs (1W to 3W) with suitable multiple optics distribution. The luminaire shall have an embossed brand name.The luminaire shall be provided with a potted LED driver having minimum 4kV internal and 5kV external surge protection, along with short circuit, open circuit, over-voltage and under-voltage protection.The fitting shall operate in an input voltage range of 140V AC to 270V AC and shall withstand voltage up to 440V for 8 hours.The luminaire shall be IP66 protected, with THD < 10%, Power Factor > 0.9, CRI > 70, CCT 6000K, and driver efficiency minimum 85%.The luminaire shall be tested as per LM-79 from a NABL accredited laboratory. The housing shall be impact and corrosion resistant.The work includes dismantling of existing unserviceable fittings, and providing & fixing the new flood light with adjustable bracket/house, including all required hardware for proper installation.The complete LED flood light fitting shall be covered under a comprehensive on-site warranty of 5 (five) years .Complete in all respects as specified and as directed by the Engineer-in-Charge .Cat. Part No.: CFS-504-100-57-60D-HL-2-GL-NSG Makes: Philips / Wipro / Crompton

Supply and fixing in repair of 1100 Volt grade, 2.5 sq.mm, twin core flat heavy duty cable, PVC insulated and PVC sheathed, with multi-stranded aluminium conductors, having inner PVC sheathing and overall PVC sheath.The cable shall be laid/installed on surface or along pole/wall as required, including necessary clamping, saddles, or suitable fixing arrangement as per site conditions.The work includes disconnection and removal of existing unserviceable cable, and installation of new cable, complete in all respects as specified and as directed by the Engineer-in-Charge . Makes: Polycab / Havells / Plaza or equivalent

Supply and fixing in repair of 1100 Volt grade, 4 sq.mm, twin core flat heavy duty cable, PVC insulated and PVC sheathed, with multi-stranded aluminium conductors, having inner PVC sheathing and overall PVC sheath.The cable shall be laid/installed on surface or along pole/wall as required, including necessary clamping, saddles, or suitable fixing arrangement as per site conditions.The work includes installation in service connections, complete in all respects as specified and as directed by the Engineer-in-Charge .

Supply and fixing in repair of street light bracket made out of 25 mm dia light grade G.I. pipe, 1.2 metre long, bent to required shape.The bracket shall be fixed with two MS clamps or flat iron clamps (20 mm × 3 mm), including nuts, bolts and washers, complete as required.The work includes dismantling and removal of existing unserviceable bracket, and installation of new bracket, complete in all respects as specified and as directed by the Engineer-in-Charge . Note : The bracket and all MS components shall be provided with one coat of red oxide primer and finished with two coats of aluminium (silver) paint.