SPECIAL REPAIR TO WATCH TOWER (PHASE-I) AT AF STN BALIJAN UNDER GE (AF) CHABUA

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth (without using extra lime or ceme complete all as specified and directed

M&L for 20 mm thick rendering in cement mortar on brick work or concrete surfaces , applied in two layers ie. Ist layer of 12 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 8 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement complete all as specified and directed.

S&F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) , with grating and union for discharge pipe Including waste pipe).

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Camouflage pattern) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over n on newly plastered surfaces or old surface including complete removal complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises incl removing the demolished material outside defence land.

M&L two coat of synthetic enamel paint over a coat of red oxide primer on new/old steel surfaces including preparation of surfaces complete all as specified and directed.

S & F framed work such as grills, grantings etc with ends of bar shouldered and or riveted or forged into spikes, framed guardbars, barred iron, doors, laddars, framed, barred iron, doors, laddars, framed, baluster walkways railings and similar work conforming to FE-290Gde E 165 complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, loandings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

Form work to soffits of suspended slabs as roof slabs lending / shelves and similar work n. exc 200mm thickness for rough finished surfaces complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking ends & binding with and including mild steel wire not less than 0.9mm dia all as specified.

M&L for Sand filling in cable trenches for cable protection with clean dry sand unwashed incl gently punning, complete.

Returning , filling in spreading, levelling, watering & well Ramming in layers not exc 25cm thick complete all as spfd & directed.

M&L for point wiring with 2.5 Sq mm single core PVC insulated unsheathed copper multi stranded conductor in and including Concealed medium grade PVC conduit of size 20/25 mm ISI marked as per site requirement inclusive of tees ,bend ,elbows etc including modular metal flux boxes for housing switch socket etc complete including PVC insulated multi stranded copper conductor 2.5 Sq mm as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chasses and making good disturbed surface to match with existing finish with plaster for One light /Fan point controlled by one one way switch complete all as specified and directed at site.

Hanging only ceiling fan obtaining from item No 27 above and connecting up including provision of cable from

Taking down old unsv exhaust Fan 230/300 mm sweep and deposited to store complete all as specified and directed ats site.