Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹86.8 LAccepted-AOC NO 8 31 HINDI PRACHARA SABHA STREET T NAGAR CHENNAI 600017 | CHENNAI | CHENNAI | TAMIL NADU | 600017 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹89.6 L+₹2.0 L (2.30%)Rejected-Finance NO 83 THAMMAIAH GARDEN ABBIGERE CHIKKABANAVARA PO BANGALORE 560 090 | BENGALURU URBAN | KARNATAKA | 560090 | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹94.5 L+₹7.0 L (7.99%)Rejected-Finance NO 4 AC 114 EAST OF NGEF OPP THE KARNATAKA STATE APEX CO OPERATIVE BANK KASTURI NAGAR BANGALORE 560043 | BANGALORE | BANGALORE | KARNATAKA | 560043 | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 4 | L4₹95.0 L+₹7.4 L (8.50%)Rejected-Finance | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 5 | L5₹96.8 L+₹9.2 L (10.5%)Rejected-Finance | L5 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer MAF Jalahalli
Garrison Engineer MAF Jalahalli Bangalore 560013
8727SPECIAL REPAIR TO BLDG No P 228 OF E ITI UNDER GE M AF JALAHALLI BANGALORE
2022_MES_564491_1
8727/E8
Open Tender
Civil Works
Item Rate
182 days
Garrison Engineer MAF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE AF MAINT PUBLIC FUND ACCOUNT
₹2.1 L
25 Feb 2023
22 Nov 2022
21 Dec 2022
22 Nov 2022
19 Dec 2022
6 Dec 2022
22 Nov 2022 - 29 Nov 2022
Amount
Sch "A" Part I B&R works Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for including removal of debris out of MD land..
Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for including removal of debris out side of MD land.
Material and labour for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under floor Brush bond Roof guard treatment) with WPC all as specified and directed
Material and labour for Providing and applying single component acrylic polymer modified, fiber reinforced water proof coating Brush bond Roof Guard in 3 coats of application @ 0.5 litre/m2/coat, The Product should have following Properties: Solid Content : 70 % Tensile strength (ASTM D 412) : 1.10 MPa Elongation (ASTM D12): 100 % Resistance to ageing due to UV radiation: 1000 hours No change Rapid Chloride Penetration : Very low Resistance to Algae growth: Passes, Zero Rating/ Permeability (mm) : 5.0 Water vapour transmission: 6.0 g/ m² h No. of coats : 3 (minimum) Adhesive bond strength : > 0.92 N/mm2 Make : FOSROC or equavaloaint approved make
Material and labour for Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work all as specified and directed.
Material and labour for 75mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate and finishing the surfaces even and smooth without using extra cement all as specified and directed .
Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection complete finished fair and even all as specified and directed.
Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key, scrubbing down with water including removal of debris out side of MD land.
Material and labour for Rendering 15mm thick in CM (1:4) (5mm with WPC over 10mm thick in two layers) on external surfaces of walls mixed with water proofing compound on stone masonry/concrete surface or brick walls finished even & smooth without using extra cementall as specified and directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified.
Material and labour 5 mm thick rendering on fair faces of concrete surfaces on ceiling in CM 1:3 and finishing the surfaces even and smooth without using extra cement all as specified and directed..
Material and labour for preparation of plastered surfaces of ceiling and applying three coats of white wash on new surfaces.
Material and labour for Rendering 15mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even & smooth without using extra cement all as specified and directed..
Material and labour for Applying bitumen blown 85/25 grade, applied hot, to concrete surfaces at the rate of 1.2kg per sqm per coat.
Supply and fixing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified
Material and labour for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete
Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified.
Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded agg as wearing coat for laying floor finishes, roof padding, finished fair to receive tiles and APP membrane complete all as specified and as directed.
Material and labour for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor all as specified and directed..
Material and labour for 20-25mm thick Machine cut kota stone slab flooring over and including 20 mm thick screed bed in cement mortar 1:6 for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing of stone flooring complete all as specified and directed.
Material and labour for Dubbing out 15mm thick on irregular face of walls in CM 1:6 on brick work or concrete/stone surfaces all as specified and directed..
Material and labour for rendering 15mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles/skirting/dado etc.
Material and labour for coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and directed..
Material and labour for 20-25mm thick Machine cut kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Material and labour for reinforced cement concrete (1:2:4)typeB-1using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even all as specified.
Material and labour for form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with flat rough finished surface of concrete all as specified and directed.
Material and labour for TMT bar 10mm dia & over deformed & twisted bars cut to length ,bent to shape required incl cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips all as specified and directed..
Material and labour for TMT bars 8mm dia as in stirrups cut to length bent to shape required including cranking, hooking ends etc and binding with MS wire not less than 0.9mm dia or securing with clips all as specified and directed..
Material and labour for 20mm thick Granite (of any type) tiles machine cut, in over platform /skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:3, grinding and polishing complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding washer facing dressed stone work and precast concrete articles including removal of debris out of MD land..
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 all as specified and directed.
Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.
Material and labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement all as specified and directed.
Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick work/stone msny finished even and smooth without using extra cement all as specified and directed..
Material and labour for preparation of New plastered surfaces of wall and applying three coat of white wash on walls all as specified and directed.
Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls and all as specified and directed.
Material and labour preparation of old plastered surfaces of ceiling and applying one coat of white wash all as specified and directed..
Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with existing complete all as directed by Enginner-in-charge.
Supply only integral water proofing compound.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames).
Resecuring or easing and adjusting wooden shutters of any description exceeding 1Sqm and not exceeding 2Sqm each with taking out and re-fixing in same opening complete all as specified and directed by Engr-in-charge.
Supply and fixing of solid PVC door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as per drawing and as directed by Engr-in-Charge.
Supply and fixing factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed by Engr-in-Charge.
Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.
Supply and fixing 4mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.
Material and labour for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc complete conforming to Fe 290.Gde -E-165 complete all as specified and directed..
Material and labour for Cutting holes in Stone walls built in cement mortar exc one brick but not exc two brick thick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 Including painting touch up as required complete all as specified and directed.
Material and labour for providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth, not otherwise described and all as specified and directed.
Supply and fixing 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply & Fixing 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.
Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.
Supply and fixing Butt hinges, medium weight cold rolled mild steel and fixed 100 mm size complete all as specified and directed..
Supply and fixing in repair 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply & Fixing in repair 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.
Supply and fixing in repairs Butt hinges, medium weight cold rolled mild steel and fixed 100 mm size complete all as specified and directed.
Supply and fixing in repair 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed all as specified and directed.
Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed
Supply and fixing 32 mm dia chromium plated cast copper alloy flush cock, screwed down, screwed for pipe complete all as specified
Supply and fixing in repair sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as directed and specified
Supply and fix in repairs waste coupling of PTMT (half or full threaded) Minimum weight 32mm- 45gms complete all as specified .
Supply and fixing low density polyethylene pipe of pressure rating 6 kgf/sq cm for WHB/sink of 32 mm bore all as directed by Engineer-in -Charge.
Supply and fixing 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement
Supply and fixing in repair fancy type brass chromium plated shower rose 125 mm size with arm complete
Supply and fixing in repairs brass chromium plated towel rail 20mm dia D type 60 cm long .
Supply and fixing in repair CP soap disk fixed with screw to wall complete all as specified and directed.
Supply and fixing in repairs stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete
Supply and fixing in repairs stop valves fancy type chromium plated with long shank and cup (concealed type ) screwed for iron pipe of 15 mm bore
Supply and fixing in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms), complete
Supply and fix vitreous China urinals, Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
Supply and fixing Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum wt 60 gms)
Hacking out old broken glass panes from wooden/ steel framed shutters including Putty/wooden beadings and supply and fix frosted glass ordinary quality 4 mm thick, in squares n.exc. 0.5 sqm in each pane including necessary oil putty/wooden beads complete all as specified and directed.
Taking out steel water tubing and connections including cleaning for refixing 15 mm dia complete all as specified and directed..
All as per item No 74 here in before but 32 mm dia complete all as specified and directed..
All as per item No 74 here in before but 40/50mm dia complete all as specified and directed..
Material and labour for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors.
Material and labour for 32 mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors.
Material and labour for 40mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors.
Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia complete all as specified and directed. (Note: Serviceable pipe obtained from item 74 to be re-used)
Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 32 mm dia complete all as specified and directed.(Note: Serviceable pipe obtained from item 75 to be re-used)
Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 40/50 mm dia complete all as specified and directed. (Note: Serviceable pipe obtained from item 76 to be re-used)
Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick/stone walls complete.
Supply and fixing in repairs PVC connection 15 mm bore, 450 mm long complete with both ends unions.
Supply and fixing triple layer Rotational moulded Polyethylene water storage tank - 2000 liters capacity (cylindrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I.
Supply and fixing in repairs 40 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe .
Demolition and bracking up 100/75mm dia drain pipes and fittings (Salt glazed ware, AC, PVC or cement) set in cement mortar all as specified and directed.
Supply and fix in repairs 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.
Supply and fix in repairs 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.
Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.
All as per item No 90 above but 75mm dia
Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm
All as per item No.92 above but bore of pipe 110 mm with access door
Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm
Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75mm
Supply and fixing PVC (SWR) branch piece, single(single Y) equal or unequal with access door bore of pipe 75mm
Supply and fixing PVC (SWR) branch piece, single (single Y) equal or unequal with access door bore of pipe 110mm
Supply and fixing PVC (SWR) branch piece, double (double Y) equal or unequal with access door bore of pipe 110mm
Supply and fixing PVC (SWR) WC connector bent pipe/reducers 110 mm
Supply and fixing PVC (SWR) Vent cowl 110mm
Raking out joints / pointing to squared rubble masonry coursed or uncoursed built in cement mortar or cement lime mortar
Material and labour Keyed pointing on squared rubble masonry coursed or uncoursed (Bangalore Pattern) in cement mortar 1:4
Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and Supply and fixing sheet glass ordinary quality 4 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete all as specified and directed..
Supply & fixing in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm. & fixed with wooden beads / stainless steel wire staples and all as specified and directed.
Removal of existing roof treatment with plastering and cleaning the surface with steel wire brushes and washing and drying the top surface for execution of work complete all as specified and directed.
Material and labour for 15 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under WPT) with WPC all as specified and directed. (Note : WPC shall be measured and paid separately)
Material and labour for water proofing treatment on horizontal and vertical surface with polymeric water proofing membrane at the rate of 3Kg/Sqm reinforced with min160 gram/Sqm non woven polyster mat over a coat of bitumen primer @.20 Ltr/Sqm and a coat of hot blown bitumen of 85/25 or 95/15 @ 1.20 Kg/Sqm applied on the top of Polymeric membrane and finally finished with a coat of bituminous aluminium paint @ of 100 grams/Sqm all specified and directed and testing complete on completion.
Hacking out old broken glass panes from wooden/ steel framed shutters including. Putty/wooden beadings and supply and fix glass ordinary quality 3 mm thick, in squares n.exc. 0.5 sqm in each pane including necessary oil putty/wooden beads complete.
Sch "A" Part II E&M works Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed
Material and labour for point wiring for ligh point /bldg security light point with two runs of FRLS cable PVC insulated unsheathed , 1100 volt copper multistranded conductor 1.5 sqmm grade in and including non metalic rigid 20mm medium grade PVC conduit with all accessories along with fixing arrangements on surface/ in wall / on ceiling/ including pvc suitable rectengular box with top cover plate not less than 3mm thick fixing on wall surface for fix switches / sockets / regulators etc all as per site require with 1.5 sqmm PVC insulated multistrand copper earth continuity conductor connecting to common earth dolly complete all as specified and directed.
All as per item no. 110 here-in-before but One exhaust fan point controlled by one 5 Amp switch
All as per item no. 110 here-in-before but One 5 Amps socket point on same board with other switches
All as per item no. 110 here-in-before but One 5 Amps socket point on independent board
All as per item No. 110 here in before but for using 4.0 sqmm for one 3/5 pin 15 Amps socket out let on independent board and multistarnded insulated with one copper earth continity conductor of size 4.0 qmm all as specified and directed .
Supply and fixing Switch piano flush type single pole and one way 230 volts 5 Amps all as specified
Supply and fixing Switch socket combination multi purpose universal 3/5 pin 5 Amps flush type 240 volts all as specified..
Supply and fixing Switch socket combination outlet 5/6 pin l 15 Amps multi purpose flush type universal pattern 230 volts all as specified.
Supply and fixing PVC ceiling rose two to three plate surface and jumbo type all as specified.
Taking down userviceable Exhaust fan, Metal Body 225/300 mm Size remove sealing cable end, blades from site sent to market for make it serviceable with servicing, rewinding, repainting of fan & blades and Refixing to Existing place and connection complete all as per site requiment and as directed by Engr-in-Charge.(Note :Quoted rates of items for taking down, servicing, repainting, hanging and electrical connection complete of Exhaust fan all are inclusive in Each Job)
Material and labour for Rewinding of unserviceable Exhaust fan with any type any size upto 300mm with copper wire , bush, insulation etc and it's make serviceable and refix at existing place/site complete all as specified and as directed.
Supply and fixing LED light fitting,4 feet ,1x20 watt 230 Volt, decorative PC body Compact appearance, simple and versatile in nature makes it as long lasting, efficient solution for offices and other spaces. Efficacy : 100 lumen/watt including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed including taking down old fitting .
Supply and fixing LED light fitting, 2 feet ,1x10 watt 230 Volt, PC body Compact appearance, simple and versatile in nature makes it as long lasting, efficient solution for offices and other commercial spaces. Efficacy : 100 lumen/watt with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed including taking down old fitting .
M&L for sub main wiring with 2 single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 4 sq mm drawn through and including 20MM size of non-metallic PVC rigid conduit with 2.5sqmm copper conductor cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed including taking down old U/S wiring. Note:-Two run of cable and one run of earth continuity copper conductor and non metalic PVC conduit shall be measured as one unit length.
Supply and fixing MCB DB(distibution board) 4 Way SPN(single pole and neutral) Double Door single phase made sheet steel cement spill protector , isolated neutral bar, IP:54 protection door earthing Mechanical impect strength IK 09, 240 volts and connection complete all as specified.
Supply and fixing SPN 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supply and fixing SP 5 To 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Material and labour for New Earthing complete with galvanised iron plate earth electrode 600mm×60mm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C2 chamber with RCC 1:2:4 type B1 in cover slab with GI protection pipe but all as specified and directed by Engineer-in-Charge including testing on completion and including taking down old earthing material.
M/S SRI BALAJI ENTERPRISES
Sai Ram Builders
D NAGI REDDY
VARGHESECHACKO AND CO
chowdeshwariconstructionco
Shanthi Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .