9 x Living Shelters(20 Men)

Manufactured and supply of Prefabricated Living Shelter of size 18.90m x 8m (out of RHS Columns ) and 3m height but 2.70 m clear height upto false ceiling as mentioned in Tech Specification Part-III

False Ceiling. Gypsum board false ceiling panels of size 595mm x 595mm with powder coated (white) and bevelled edge grid frame work of aluminum anodized snap grids size (600mm x 600mm) to support the boards/tiles with Tee Sec 35x25x1.6mm thick, cross tee 25mm x 25mm x 1.6mm and angle 40mmx25mmx2mm as on edge/sides with and including 15mm thick friendly light weight calcium silicate tiles of spintone/cosmos surface textured of approval microlook edge fixed in suspended grid of size 600mm x 600mm as false ceiling incl proper hanging arrangement with 3mm dia aluminum anodized wire and as specified and directed by the Engr-in-charge. Make: EVEREST/GYPROC/ARMSTRON. Roof The roof shall be done with corrugated/ semi corrugated pre painted galvanized steel and pre painted galvanized steel sheet ridge cover semi corrugated with thickness of minimum thickness not less than 0.60 mm confirming to IS 14246: 2013. Top coat of sheet shall be pvde/Silicon modified polyester having thickness of 20 micron (min) and back coat shall be of Alkaloid epoxy or polyester having thickness of 7 micron (Min). A protection sheet (Polyethylene) shall also be provided on top coat of the sheet for transport. These corrugate pre painted GI sheets are laid over a frame work of trusses, columns and purlins fixed using suitable fasteners SDS Tapping screw etc. A pre painted galvanized steel sheet ridge cover of size 450mm x 450mm is to be fixed on top junction of the roof using suitable fasteners. Make: TATA/SAIL/ACCIL/JINDAL or equivalent. Roof Structural Frame Work. The roof shall be laid over a frame work of trusses, columns and purlins fixed using suitable fasteners like SDS Tapping screw etc. The trusses shall be made using ISI marked rectangular hollow sections of king post size 80mm x 40mm x 3.2 mm and RHS box size 50mm X 25mm X 1.8mm to IS 4923 : 1997 (Reaffirmed 2013) amdts 1 to 6. The trusses are provided at a distance of 1.0m. and as per drawing Make: TATA/SAIL/JINDAL or equivalent (e) 02 Nos MS wind tie of FI 40x3 mm shall be provided on each side to roof and fixed with purlin with 10 mm dia 75 mm long MS bolts & nutd.

Double Bunks. (10 Nos) Double Bunks MS of size 1830mm (L) x 930 (W) x 1830 (H) at leg side & 910mm (H)

Steel Almirah. (10 Nos) Supply of steel almirah of the specifications as per Part III (Drg att)

Mattress. High density Coir mattress of size 1800mm x 900mmx 150mm shall be provided with each bunk with quilting on both sides and covered with superior quality cloth. Make - Kurlon/Sleepwell/Coirfoam.

Cushion chair with arms Make - Supreme/ Neel kamal

Table writing steel frame and bhutan Top / sunmica top size 1200mm x 600mm x 740 mm with drawer & locking arragement Make : Godrej/Supreme/Neelkamal.

Looking mirror 0.50m x 1.65m with aluminium frame and suitable hanging arrangement. Thickness of glass not less than 5 mm. Make - Atul/Sant Gobian/Modi Guard

Looking mirror 450mm x 300mm with aluminium frame and suitable hanging arrangement. Thickness of glass not less than 5 mm. Make - Atul/Sant Gobian/Modi Guard