PROVN OF TOILETS FOR SNCOs MESS AND CERTAIN OTHER OTM AREAS, PROVN OF VALLEY GUTTER AT OFFICERS MESS, INSTALLATION AND FITMENT OF ACP IN FRONT OF ANNEXE HALL AND HUME PIPE CULVERT IN FRONT OF BLDG NO. P-234, AT VAYUSENA NAGAR NAGPUR

Amount

Material and labour for Surface dressing n.exc 15cm deep in soft/loose soil as specified and directed.

Excavation in trenches n. exc 1.5 mtr wide & not exceeding 1.5 mtr depth; for foundations, etc. on for shafts, well, cesspits, manholes, pier holes, etc., not exceeding 10 sqm on plan and n. exc. 1.5m in depth and getting out in hard/dense soil, complete as specified and directed.

Material and labour brick work with fly ash old size bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) including demolition of existing brick work where ever required complete as specified and directed.

Material and labour for 10 mm thick rendering(internal) on fair faces of brick masonry work or concrete surfaces of wall in CM (1:4), finished even and smooth without using extra cement complete as specified and directed.

Material and labour for 15mm thick rendering (external) on fair faces of block masonry or concrete surfaces of wall in CM (1:4), finished even and smooth without using extra cement complete as specified and directed.

Material and labour for Plain cement concrete, type D-2 (1:4:8) (using 40mm graded crushed stone aggregate), as in foundation filling and mass concrete and sub base of floors as specified and directed.

Material and labour for 5mm thick rendering on fair faces of concrete surfaces of ceiling in CM (1:3), finished even and smooth without using extra cement complete as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in hard/dense soil, complete all as specified and directed.

Removing of excavated material (soil) to a distance exc 250mtr but n. exc. 500 mtr and depositing where as directed by EIC, complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone agg as in plinth protection finished even and smooth w/o using extra cement as specified and directed.

Material and labour for formwork to sides of concrete foundation plinth beams, and similar work complete as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, lintels, shelves etc complete as specified and directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs not exceeding 200mm thick (horizontal or sloping) complete as specified and directed.

Material and labour for TMT Bars 10 mm dia & over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, beams, roof slabs hooking ends & binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Alll as per item No 14 above but 5 to 10mm dia as in stirupps complete all as specified and directed.

Material and labour for RCC type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in footing plinth beams and mass concrete etc complete all as specified and directed.

Material and labour for RCC type B1,1:2:4 (using 20 mm graded crushed stone aggregate) roof Beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

Material and labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Material and labour for RCC Type B1 1:2:4 using (20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for RCC type B1,1:2:4 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves & the like as specified and directed.

Material and labour for hardcore of gauge exc. 63mm but n. exc. 100mm deposited spread and levelled in layers n. exc. 15cm thick, watered and rolled and rammed to a true surface with broken stone or boulders as in hardstanding complete all as specified and directed.

Material and labour for sand filling under floors spread, levelled, watered and well rammed in layers n.esc 25 cm thick complete as specified and directed.

Material and labour for 100mm thick, PCC 1:4:8, type D -2 (using 40 mm graded crushed stone aggregate), as in sub base of floor’s complete all as specified and directed.

Material and labour Non skid ceramic coloured tiles 7 to 8mm thick ( Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc.incl and over 15mm thick screed bed or bedding layer of CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (300x200)x7mm thick in vertical surfaces including 10 mm thick rendering in CM 1:3 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles

Supply and fixing vitreous china wash down water closet pan (pedestal pattern) white incl seat cover of plastic complete all as specified and directed.

Material and labour for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed.

Supply and fixing vitreous china wash hand basin, white size 550 x 400 mm incl bracket & waste fitting brass cp with long screwed shanks flynuts flange embedded in red cement and other end fixed including waste pipe complete all as specified.

Supply and fixing PVC connection 15 mm size with PTMT nut of length 450 mm as specified and directed.

Supply only PVC low level flushing cistern white including flush pipe suitable for IWC/EWC, 10 Lit capacity complete as specified and directed.

Supply and fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe as specified and directed. (Minimum weight 60gms)

Supply and fixing vitreous china soap tray/dish,white, approximate size 160x 160x90mm embedded in the wall as specified and directed.

Supply and fixing Grating doom 125mm dia. with waste hole of PTMT (minimum weight 40 gms), complete all as specified and directed.

Supply and fixing Vitreous China Urinal, Half stall type, white including Push cock, Spreader white complete all as specified and directed.

Supply and fixing bib taps 15mm dia , chromium plated, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing stop valves 15mm dia bore of pipe, chromium plated, fancy type, with long shank and cap (cocealed type) complete all as specified & directed.

Supply and fixing fancy type chromium plated stop valve/ angle valve 15mm dia cast copper alloy, screwd down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete. copper alloy as specified and directed.

Supply and fixing 15 mm dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Supply and fixing PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fixing PVC (SWR) pipes ,110 mm ,single socketed in any length with rubber ring joints in trenches or floor with and including necessary fittings such as bend/tee/junction/vent cowl etc complete as specified and directed.

Supply and fixing PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 75 mm ,single socketed in any length with rubber ring joints fixed in trenches or floor with and including necessary fittings such as bend/tee/junction/vent cowl etc complete as specified and directed.

Material and labour for preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of cement based paint over a coat of primer complete all as as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete as specified and directed.

Material and labour for 15mm dia bore galvanized steel water tubing, “medium grade,” with all fittings and fixed to walls or laid in floors complete as specified and directed.

Material and labour for 20mm dia bore galvanized steel water tubing, “medium grade,” with all fittings and fixed to walls or laid in floors complete as specified and directed.

Supply and fixing choromium plated tubular towel rail 20mm dia, 60 CM long as specified and directed.

Supply and fixing anodised aluminium window and ventilator shutters, Powder coated aluminium (minimum thickness of owder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and fixing anodised aluminium frame (with powder coting of minimum thck 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fixing 500 Ltr rotational moulded polyethylane water storage tank (cylinderial vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete as specified and directed.

Supply and fixing 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either zixs as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing as specified and directed.

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube as specified and directed.

Supply and fixing Stainless steel butt hinges medium weight size 100mm long as specified and directed.

Supply and fixing aluminium handles cast type anodised size 150 mm long as specified and directed.

Supply and fixing aluminium anodiesed barrel tower bolt of extruded section size 200 mm as specified and directed.

Supply and fixing sheet glass 4 mm thick orinary quality and glazing with oil putty in square n.exc. 0.50 Sqm each as specified and directed.

Material and labour for septic tank 10 users capacity complete all as specified and directed.

Material and labour for concrete bed in P.C.C ( 1:4:8), type D-2 (using mm graded aggregate ) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for 150mm dia pipes all completed and directed.

Material and labour for 600 mm bore reinforced concrete pipes, class NP2, dia 150mm laid and jointed complete with collars as in drain or sewage disposal as specified and directed.

Supply and fixing RCC bends, laid and jointed, complete as specified and directed.

Supply and fixing RCC Single 'Y' junctions laid and jointed, complete as specified and directed.

Supply and fixing cast iron soil, waste and vent pipes of dia 100mm in any length with or without ears, with cement joints, laid in renches or in floors all completed and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slabs/blankets any thickness all as specified and as directed.

Material & Labour for providing and fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instruction all as specified and as directed.

Material & Labour for hangers 6 mm dia GI (upto 200 mm length) adjusting level fixed to roof slabs to roof slabs by means of ceiling cleates made out of GI flar 40x3 mm flat and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed.

Material & Labour for Anodized aluminium snap grid frame work for false ceiling all as specified and as directed.

Supply and fix pre-painted galvonium aluminium zinc coating GI based plain steel sheet 0.50 m thick of an colour having tensile strength of 550 Map as in roof covering / cladding to wall, fixed with self tapping screw all as specified and as directed.

Material & Labour for 2.5 mm, plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) including moulding to required shape, and fixing to angle, channel in required slope complete all as specified and as directed.

Material & Labour for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Fe-410-W (Gde E-250) quality B(cut to oridinary lengths i.e. Within 20mm of the length indicated) complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161 - 1979 grade St-240 complete all as specified and as directed.

Supply and fix mild steel screw bolts (Machine made) with hexagonal or square head at one end and screwed the other end not exceeding 5 cm long and diametre of neck exceeding 5 mm but not exceeding 10 mm dia all as specified and as directed.

All as per item No 76 above but length of bolt exceeding 10 cm and not exceeding 15 cm long and dia exceeding 16 mm but not exceeding 20mm complete all as specified and directed.

Material & Labour for two coat of synthetic enamel pait over a coat of pink primer for surfaces of any description, not otherwise descri-bed,over 10 cm width or girth complete all as specified and as directed.

Material & Labour for providing aluminium composite panels including all necessary frame work and consist of following 3 mm thick thermoplastic core of any toxic LDPE sanwitched between 2 sinks of 05 mm aluminium sheet making a total panel thickness of 4 mm width outer surface finished with PVDF based coating 30 micron inner surface finished with a thin coat of polister paint. (2) Aluminium framing of section 38 mm x 50 mm x 1.50 mm thick. (3) Aluminium grid shall be fixed with clamp 4 x 6 mm not more than 1 mc/c colour shall be approved by GE complete all as specified and as directed.

All as per item No. 79 above but in removing / taking down old ACP complete all as specified and as directed.

Dismantling of existing cobble stone safely to re-use in the same position, and re-fixing cobble stone as per existing pattern over and including moist stone dust 50 mm thick laid to required slope for avoiding water logging use of sand over the fixed interlocking paver and pouring water supply evently complete all as specified and as directed.

Material & Labour for 60 mm thick cobble stone grey coloured finished precast (factory made) PCC interlocking cobble stone rubber moulded manufactued from OPC cement mixed with pigments strength minimum M-34 grade concrete vibro-compacting to IS 15658-2006 of any shape and design as approved laid over and including moist stone dust 50 mm thick laid to required slope for avoiding water logging, use of sand over the fixed interlocking paver and pouring water evenly complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting piont complete all as specified and directed.

Material & Labour for concrete bed in PCC (1:3:6), type C-2 (using 20 mm graded aggregate) to drain pipes including packing under and haunching against the slides of the pipes after laying and testing for 600 mm dia pipes complete all as specified and as directed.

Demolition of brick work built in cement mortar including quoins, arches but excluding precast articles etc complete all as specified and as directed.

Material & Labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 with finished even and fair without using extra cement all as specified and as directed.

Material & Labour for plain cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate in hard standing complete all as specified and as directed.

Material & Labour for precast cement concrete 1:3:6 type C1 as in manhole covers including form work etc., all as specified and as directed.

Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and as directed.

Material and labour for sub main wiring (concealed) complete with two single core 2.5 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade ISI marked and conduit accessories including 2.5 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 2.5 sqmm&one run of PVC conduit shall be measured as single unit

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and directed.

(a) One light point controlled by one switch

(b) One switch socket outlet modular type 3 pin 6 amp on same board.

(c) One exhaust fan point controlled by one switch.

All as per item No 9 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board as specified and directed.

Note for Item No. 1 & 3 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.

Supply & Fix new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro.

Supply and fixing Surface mounting LED Luminaries and 1 x 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG/ Phillips/ Wipro/ Bajaj

Supply and fixing Switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in L & T/ Seimens

Supply and fixing socket modular type 6 Amps 3 pin 2 module 250 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivlent in L & T/ Seimens

Supply and fixing for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed. Make : Leader/ Anchor / Havells

Supply and fixing sheet metal enclosures for SPN with metal double door for incorporating MCB SPN ,IP-43, 4 way, 240 volts, as per IS-8623 all as specified and directed. Make : Legrand, ABB, Seimens

Supply and fixing MCB SPN, 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc as specified and directed. Make : Legrand Cat No. 408617/ L & T/ Seimens

Supply and fixing MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc as specified and directed. Make :Legrand / L & T/ Seimens

Supply & Fixing new exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including making suitable hole for fixing of exhaust fan all as specified and directed. Make : Bajaj/CG/ Wipro/ Usha/

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core.

Material and labour for for High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of size 25 mm dia laid in trenches for passing of LT cable complete all as specified and directed.

Supply & laying in trenches new GI tube, 20 mm dia, medium grade, galvanised with all fittings such as tees, bends, elbows, reducers, union etc. and fixing accessories such as lock nuts, saddles, pipe hook etc. complete fixed from existing overhead tank to water storage tank of 500 ltr with necessary fittings in walls, ceilings or laid in floors all as specified and as directed.

M/s Prakash R. Verma

Rajveer Infrastucture