Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance NO 43 SOUTH MADA STREET THIRUKKAZUKUNDRAM 603 109 CHENGALPATTU DISTRICT | THIRUKKAZUKUNDRAM | CHENGALPATTU | TAMIL NADU | 603109 | Admitted-Finance |
Tender Value
₹26.2 L
EMD Value
₹52,405
Closing Date
17 May 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PROJECT DIRECTOR
Office of the Project Director, FRFCF-NRB, Kalpakkam.
Construction of RCC trenches and associated finishing works in DM Plant at FRFCF project site, Kalpakkam
2023_BARC_751385_1
NRB/FRFCF/CIVIL/2023-2024/007
Open Tender
Civil Works
Item Rate
122 days
FRFCF, KALPAKKAM
Please refer tender document
8 documents required · 8 mandatory
₹0
₹52,405
30 Jun 2023
3 May 2023
19 May 2023
3 May 2023
17 May 2023
4 May 2023
4 May 2023 - 16 May 2023
Amount
All kinds of soil with depth upto 1.5m below average Ground level and disposing surplus excavated earth upto a lead of 1Km.
Providing and laying plain cement concrete M20 grade using 300 kg/cum of PPC, 20mm maximum size graded aggregates and washed crushed stone sand including mechanical mixing, transporting and placing in required position, ramming, compaction, levelling, curing, shuttering, dewatering if any, complete all as per specification for levelling courses in foundation for walls, footings, floor drains etc., encasing pipes and other required works directed by Engineer-in-Charge complete all as per specifications. Dosage of PCE based admixture as per workability requirment at site conditions. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Polycarboxylate ether (PCE) based chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility. 2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/ downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F.
Providing and laying cast insitu controlled reinforced cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size hard granite machine washed crushed graded stone aggregates and washed crushed stone sand including testings as per QAP, weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, 14 days curing and finishing smooth of all exposed faces complete for column footing, columns, lintels, sunshades, gutter slabs, beams, slabs, water tank, machine foundation and all other structural elements including dewatering wherever necessary (Formwork and reinforcement will be paid for separately) all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item. Note: 1. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Polycarboxylate ether (PCE) based chemical admixture confirming to IS 9103 shall be mixed in fresh concrete and prior permission from engineer-in-charge shall be obtained for dosage and compatibility. 2. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor. 3. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/ downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified in Schedule F.
M30 grade with 380 kg of PPC per cu.m. of concrete upto plinth level
Manufacturing, supplying, hoisting and fixing in position at all lifts, precast units of various patterns and sizes for perforated precast plain solid units, slabs, etc, in controlled reinforced cement concrete of M30 grade using 20mm and below machine crushed graded stone aggregate including making perforations in precast slab as per drawing weigh batching, mechanical mixing, casting, vibrating, finishing of exposed faces, curing, necessary formwork, moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excluding steel reinforcement complete all as per drawing, specification and as directed by Engineer. Note: 1. The rate shall be quoted on the basis of using 380 Kg. of cement per cu.m. of concrete. Any upward/downward variation required to obtain the specified strength will be paid for or deducted at the rate specified in schedule F. 2. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS:9103 shall be mixed in fresh concrete and prior permission from Engineer-in-charge shall be obtained for dosage and compatibility. 3. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor.
Providing straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D grade steel conforming to IS:1786 and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks and binding wire complete all as per specification and as directed by Engineer-in-Charge at all lifts. Note: The rate shall be including the cost and testing of reinforcement steel at thrid party NABL lab. The reinforcement steel will be procured from dealers with a test certificate as approved by the department. For further details please see Clause 12 of Section VIII, General Information for Guidance of Tenderers.
Supplying, fabricating, erecting and fixing in position at all levels, centering and shuttering to correct line and levels including strutting, propping, etc., with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leak proof and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to self-support itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts, Including forming Horizontal & Vertical grooves/drip moulds of 25 mm wide and 8 mm deep in the plastering surface and fixing wooden reeper in the shuttering itself at all levels correct line, level and plumb as directed by EIC. Shuttering with plywood panels alone will be permitted. Note : 1. The measurement for the formwork will be the actual area of forms in contact with concrete surfaces. 2. The rate shall include for providing necesary holes, chamfers, drip mouldings, pockets, application of approved form/mould release agent, making cutouts, slits and depresssions for fixing pipe sleeves at all indicated locations etc. in formwork as directed by EIC.
Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment’s / edge angles / pipe and sleeves / penetration / gates / cage ladders / chequered plates etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: Lifting device arrangements if any required also arranged by the contractor at his own cost.
Supplying, providing and laying 200mm thick Cement Concrete block masonry using solid concrete blocks of size 400 x 200 x 100mm manufactured as per IS : 2185 (Part-1) density not less than 1800 kg/cu.m of grade C 4.0 using 20mm down graded aggregates in basement & superstructure at all elevations in cement mortar 1:5 including mixing mortar, hacking closely concrete surface, laying blocks, raking joints, curing etc., with all materials, scaffolding, labour, tools etc., all complete as per drawings, specifications and as directed by the Engineer-in-charge. Reinforcement if provided will be measured and paid under relevant item.
Providing plastering to the internal surfaces of brickwork / concrete at all elevations in cement mortar 1:5, 12mm thick including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications.
Providing plastering to the external surfaces of brickwork / blockwork / concrete at all elevations in cement (PPC) mortar 1:4 using washed cruhed stone sand, 20 mm thick in two layers, base layer 12 mm thick and a top layer 8 mm thick finished rough with sponge. including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications.
Providing Acid / Alkali resistant flooring and dadooing using 12mm thick Acid / Alkali resistant tiles of pelican or approved equivalent make as per IS: 4457 including preparation of surface by hacking the concrete surface applying one coat of primer, application of 10mm thick mastic membrane, laying of tiles in potassium silicate based mortar of 2mm thick and pointing the joints with to a depth of 10 to 12mm with CNSL mortar etc. cleaning the surface neatly at the time of handing over the area complete all as per manufacturer's specification and as directed by the Engineer-in-charge. Note: The sample tile shall be got approved by the Architect / Engineer before procurement. The job shall be got executed by specialists in this line.
Providing and Fixing Homogeneous PVC sheet, 2mm thick, conforming to IS:3462 latest edition in flooring and skirting (Polyfloor or approved equivalent make) IN APPROVED Pattern, colour & SHADe on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop-S 758, or Fevicol SR 998, or approved equivalent including cleaning & preparation of surface, levelling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5kg all complete all as per specification and as directed by the Engineer-in-Charge Note: The sample tile shall be got approved by the Architect/Engineer before procurement.
Providing and laying 25mm thick Indian patent stone flooring and skirting with cement concrete 1:2:4, using 10mm and below size hard broken granite stone jelly including dividing strips, laying in panels, consolidating, curing, rubbing the surface smooth, clearing the surface neatly at the time of handing over the area complete all as per specifications and as directed by the Engineer.
Providing and fixing Gypsum False ceiling Tiles, 600x600x15mm of Armstrong or approved equivalent make, pattern & design in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 170 gms/Sqm) consisting of main "T" runner suitable spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet spaced at 1200mm centre to centre and cross "T" of size 24x27mm made of 0.33mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm centre to centre to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.33mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T runners to be suspended form ceiling using GI slotted cleats fixed to ceiling with 6mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanized level clips spaced at 1200mm centre to centre along main T, bottom exposed width of 24mm of all "T" sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer in charge.
Installation and commissioning of SS eye washer and safety shower of approved quality including all fixtures, plumbing items like pvc inlet connection, bottle trap, taps, waste water lines,disposal pipes etc., all complete and as directed by the EIC. Note: SS eye washer and safety shower will be supplied by department at the free of cost.
Providing and applying painting Two coats at all levels with Acrylic emulsion paint (ACE or Equivalent approved brand, colour and manufacturer) to give an even shade including one under coat of suitable primer, applying putty, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-charge.
Providing and applying painting Two coats on wood work and other required internal surface at all levels with Synthetic enamel paint (Asian or approved brand, colour and manufacturer) to given an even shade including one under coat of suitable primer, preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-charge.
Providing and fixing liquid soap dispenser in PVC container "VEGA" or approved equivalent make with all accessories and CP brackets including necessary screws for fixing complete all as directed by the Engineer-in-charge.
Providing and fixing 6mm thick Mirrors of size 600 x 460 x 6mm "Modi Guard" or approved equivalent make with bevelled edges complete with 6mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete all as per specifications and as directed by the Engineer-in-charge
Providing and fixing brass ball cock 25mm dia (TECHNO make) or approved Equivalent heavy quality of following sizes with arm rod and plastic Ball floats complete as per specifications and as directed by the Engineer-in-charge.
Providing and fixing Heavy Quality 15mm nominal bore C.P. Brass Angle cock 'ESSCO / PLATO' or approved equivalent make and type as per specifications and as directed by the Engineer-in-charge. (Samples to be got approved by the Engineer-in-charge)
Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15mm dia 600mm long as per specifications and as directed by the Engineer-in-charge.
Providing, laying, jointing and fixing medium class G.I screwed pipes bearing with ISI mark conforming to following sizes with specials including cutting to the required length, threading and jointing with white lead joining compound etc., complete for water supply lines, suction and delivery lines of pumps, laying of pipes in the excavated trenches including cost of all the specials (Such as coupling, nipple, tee, bend, elbow, reducer, union etc.) and testing the line, painting the pipe lines with two coats of synthetic enamel paint of approved colour and make over a coat of primer etc. complete all as per specification and as directed by the Engineer-in-charge. Note: Earthwork excavation and making flanged joints will be paid separately under relevant items.
25mm n/b G.I. pipe
40mm n/b G.I. pipe
Providing laying and fixing with uPVC pipe laid /embedded under floor slab and fixed to walls wherever required FINOLEX/PRINCE or other approved equivalent make of UPVC stabilized - SWR PVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS - 13592 - Latest edition and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or anti-syphonage PVC pipe with necessary PVC clips and joints.
76mm OD UPVC pipes and specials.
110mm OD UPVC pipes and specials.
Providing and fixing the following sizes of gun metal full way gate valves female ends screwed bonnet integral seat non raising spindle class I, ISI marked to IS: 778 tested to 20 kg/sq.cm hydraulic pressure etc. complete all as per specification and as directed by the Engineer-in-charge.
40mm nominal bore
Providing and constructing Gully Chamber of internal size 300x300mm including providing, supplying and fixing 150 x 150mm stoneware gully trap with CI grating including excavation in all types of soils, backfilling, embedding in plain cement concrete 1:4.5:8 using 40mm size granite aggregates and constructing the above chamber with 115mm thick brick work in plastering over both internal and external faces of brick work with cement mortar 1:3, 12mm thick finished smooth with a floating coat of neat cement on both faces, providing and fixing CI cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design complete all as per specification and as directed by the Engineer-in-charge.
Construction of Inspection chamber of following size internally up to 1.00 metre depth with brick masonry walls of 230/345mm thick using stock bricks in cement mortar 1:5 with necessary brick carbelling as required, plastering with cement mortar 1:3, 12mm thick for external sides of the chamber including excavation in all types of soils, back filling, providing and laying 150mm thick PCC 1:4.5:8 for foundation concrete forming bencing in PCC 1:2:4 using 20mm maximum size graded aggregate etc. complete all as per specification, drawing and as directed by the Engineer-in-charge.
Inspection chamber of internal size 600x600mm
Supplying and fixing in position of heavy quality Cast Iron manhole frame and cover, steps etc of specified weight for the inspection chamber, valve chamber etc. all as per specifications and as directed by the Engineer-in-Charge.
Dismantling brick works at all levels by manually / by mechanical including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 50m lead, labour, tools required etc. complete in all respects as per specifications and directed by the Engineer-in-charge.
Dismantling of RCC works at all levels by manually / by mechanical including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 50m lead, labour, tools required etc. complete in all respects as per specifications and directed by the Engineer-in-charge.
Core cutting in RCC structures of grade N30 at given location upto 300mm diameter and different lengths, with rotary drilling, either by pneumatic machines or by electrical machines, at all elevations / positions without disturbing adjacent structures etc., for horizontal and vertical surface all complete as per drawings, specifications and as directed by Engineer-in-charge. Rates to include all labour, tools, tackles, consumables, scaffolding & staging etc.
K.J.SHANGAR CIVIL CONTRACTOR
A.BASHKAR
R CHANDRASHEKARAN
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .