Repairs and maint of sewage pump, swimming pool, incinerator, fire alarm system, lift and Diesel Gen Set at Tibri Mil Stn under GE Gurdaspur.

Amount

Repair to alternater 110 KVA disconnecting electrical connection from site carefully and shifting to repair workshop dismantling the complete alternator and dismentling stator winding carefully and rewinding of stator with super enamelled existing size winding wire with insulation material and varnish. Reassembling after repair and shifting to site and testing on load. Note : All T&P, Vehicle and labour shall be provided by contractor.

Supply and replacement of self starter Assbly 12 volt complete with battery lead and battery terminal suitable for 100 to 125 KVA DG Set all as directed

Repair overhauling of self starter 12 Volts including replacement of worn out clutch, Retaping of main AUX field coil, solonoid switch, corbon brushs, spring and rewinding of armature etc for 25 KVA to 40 KVA DG set. Make Lucas

All as per Srl item No 3 above here-in-before but for 100 KVA to 125 KVA DG Set.

Repair /overhauling of dynomo including supply & replace of new carbun brush and re-winding of armature and testing on load complete of dynamo of the DG set of capacity 100 KVA all as directed by Engineer in Charge

Taking out existing non clog sewage pump, set of any type and size from sewage sump (alongwith existing column pipe) including all fittings complete all as specified and directed. Note : All T & P vehicle and man power shall be provided by contractor.

Lowering non clog sewage pump, set of any type and size in sewage sump (alongwith column pipe) including all fittings complete all as specified and directed. Note : All T & P vehicle and man power shall be provided by contractor.

Disconnecting and taking out motor from non clog sewage pump, dismantaling the burnt motor, rewinding the motor with super enamelled copper winding wire as per existing gauge, size including suitable insulation material cotton tape, varnish , insulation paper , sleeves and dry & baking etc connections etc and assembling complete after duly repair installation, commisioning and testing upto the satisfactory working performance including replacing bearing for NDE & DE side of motors for the capacitiy 12.5 HP, 3 Phase, 415 Volt, complete all as specified and directed. Note:- All T&P vehicle and manpower will be provided by contractor.

S&F in replacement of Impeller CI sutaible for 12.5 HP sewage non clog pumping set complete all as specified.

S&F in replacement of Ball Bearing as per sample for 12.5 HP sewage non clog pumping set etc complete all as specified.

S&F MS tail piece, 6" dia, length as required, both end flanged, with nuts bolt and rubber flanged complete in replacement of existing unserviceable tail piece all as specified and directed.

Supply only,rubber insertion sheet 4 mm thick for gasket to flanged MS/CI/DI pipe in replacement of old damaged insertion sheet all as specified and directed.

Taking out, dismantaling the mono block pump motor, from foundation / site, transporting the same to workshop, taking out of all burnt winding wires by strip opening of 3phase electric motor of any make, rewinding the motor with super enamled copper winding wire of required gauge and quantity including varnishing insulation sheet cotton, glass sleave etc as required, reassembling,testing, transporting back to site from workshop, installing back and making connection and again testing for motor capacity 1 HP to 2 HP complete all as specified and directed

All as per Srl item No 14 here-in-before but for motor of capacity 3HP to 4HP

All as per Srl item No 14 here-in-before but for motor of capacity 5HP to 7.5HP

All as per Srl item No 14 here-in-before but for motor of capacity 12.5HP.

Supply & fixing Mechanical Oil Seal for 12.5 HP, sewerge submersible motor & pump including taking down old unserviceable one all as specified and directed.Make : Kirloskar or equivalent approved.

M & L battery lead acid type 180 AH, 12 Volts 25 plates, maintenance free complate all as specified and directed. Make :- Exide/Amco/Amaron/Standard.

M & L battery lead acid type 120 AH, 12 Volts 25 plates, maintenance free complate all as specified and directed. Make :-Exide/Amco/Amaron/Standard.

M & L battery lead acid type 100 AH, 12 Volts 25 plates, maintenance free complate all as specified and directed. Make:- Exide/Amco/Amaron/Standard.

M & L in replacement of PVC insulated battery lead stranded copper conductor of size 50 Sq mm suitable complete all as specified & directed .

General servicing of DG Set of 12.5 KVA capacity, Make kirloskar, Model D-9, Air cooled type by cleaning externally, taking out tapet cover and carrying out tappet setting including replacement of tappet cover gasket, tightening of all external fasteners, bolts, nuts etc., cleaning of benjo bolt filter of fuel feed pump, cleaning of fuel filters, oil filters and air filter including replacement of filter elements, engine oil, fan belts, engine hoses, worn out electric wiring, meters, including toping up of coolant, electrolyte of battery etc. all as required and directed for proper designed output of gen set. NOTE: Spares e.g. fuel filter element, oil filter element, air filter element, coolant, hose pipes, fan belts, meters etc. as required to be replaced shall be measured and paid seprately as "material only". Minor parts e.g. bolts, nuts, washers etc. including necessary T & P and cleaning materials as required for servicing shall deemed to be included in the rate quoted.

All as per Srl item No 23 here-in-before but for DG set of capacity 25 KVA to 30 KVA Make Cromton Greaves / Kirloskar, water cooled type.

All as per Srl item No 23 here-in-before but for DG set of capacity 35 KVA 100 KVA , Make Cromton Greaves / Kirloskar, water cooled type.

All as per Srl item No 23 here-in-before but for DG set of capacity 110 KVA to 125 KVA, Make Kirloskar, water cooled type.

Material only pre filter and fine diesel filter element for 12.5 KVA Gen Set, Make Kirloskar

All as per Srl item No 27 here-in-before but for 25 KVA Gen Set, Make Cromton Greaves / Kirloskar, water cooled type.

All as per Srl item No 27 here-in-before but for 30 KVA to 35 KVA Gen Set, Make Kirloskar, water cooled type.

All as per Srl item No 27 here-in-before but for 40 KVAto 63 KVA Gen Set, Make Kirloskar, water cooled type.

All as per Srl item No 27 here-in-before but for 100 KVA to 125 KVAGen Set, Make Jackson / Cummins and Kirloskar, water cooled type.

Material only oil filter element for 12.5 KVA Gen Set, Make Kirloskar

All as per Srl item No 32 here-in-before but for 25 KVA to 35 KVA Gen Set, Make Cromton Greaves / Kirloskar, water cooled type.

All as per Srl item No 32 here-in-before but for 40 KVA to 63 KVA Gen Set, Make Kirloskar, water cooled type.

All as per Srl item No 32 here-in-before but for 100 KVA to 125 KVAGen Set, Make Jackson / Cummins and Kirloskar, water cooled type.

S&F rubber coupling for 12.5KVA Gen Set, Make Kirloskar

All as per Srl item No 36 here-in-before but for 25 KVA to 35 KVA Gen Set, Make Cromton Greaves / Kirloskar, water cooled type.

All as per Srl item No 36 here-in-before but for 40 KVA to 63 KVA Gen Set, Make Kirloskar, water cooled type.

All as per Srl item No 36 here-in-before but for 100 KVA to 125 KVA Gen Set, Make Jackson / Cummins and Kirloskar, water cooled type.

S&F fan belt for 12.5KVA Gen Set, Make Kirloskar

All as per Srl item No 40 here-in-before but for 25 KVA to 35 KVA Gen Set, Make Cromton Greaves / Kirloskar, water cooled type.

All as per Srl item No 40 here-in-before but for 40 KVA to 63 KVA Gen Set, Make Kirloskar, water cooled type.

All as per Srl item No 40 here-in-before but for 100 KVA to 125 KVA Gen Set, Make Jackson / Cummins and Kirloskar, water cooled type.

Supply and fixing of Hose Pipe Set with clamp for DG Set of 25 KVA to 35 KVA. Make :- Kirloskar

All as per Srl item No 44 here-in-before but for 40 KVA to 63 KVA Gen Set, Make Kirloskar, water cooled type.

All as per Srl item No 44 here-in-before but for 100 KVA to 125 KVA Gen Set, Make Jackson / Cummins and Kirloskar, water cooled type.

Overhauling and calibration of FIP assembly of 12.5 KVA capacity DG Set at an authorised workshop including replacement of worn out rings, plungers, damper plates, gasket etc.and including taking out, transporting, refitting, refixing & testing complete. Make :- Mico

Overhauling and calibration of FIP assembly of 25 KVA to 63 KVA capacity DG Set at an authorised workshop including replacement of worn out rings, plungers, damper plates, gasket etc.and including taking out, transporting, refitting, refixing & testing complete. Make :- Mico

Material only for topping up of water coolent in radiator of DG set TVS Girling/volvo line or of equivelent make all as directed by Engineer-in-Charge. Make Castrol, Servo, Max

S & F of engine oil of DG Set of 10W-30/20W40 or equivalent of Make : Castrol/volvoline all as directed by Engineer-In-charge

Repair / overhauling / charging alternator , supply & replace of positive rectifire and negnative rectifire and re-winding of stater (armature and testing on load).

S&F automatic voltage regulator suitable for DG set for 25KVA to 125KVA. Make :- Kirloskar

M&L for repairing & rewinding of alternator of 3 Phase, 415 Volts, 50Hz including rewinding of field coil and varnishing and drying,decarbonisation of slip ring assembly, checking and calibertion of excitation system etc. complete as specified and as directed for alternators of upto capacity 30 KVA/ 40 KVA.

All as per srl item No 53 here-in-before but for alternator of capacity 100 KVA / 125 KVA

Taking out the radiator assembly of DG set of 125 KVA capacity and transporting to work shop dismantling upper and lower tank and cleaning thoroughly, replacement of gasket packing , nuts, bolts, washers, descaling with appropriate chemical and brazing of damazed fins / tubes and reassembling & refixing in same position after testing complete all as specified and directed.

All as per srl item No 55 here-in-before but for DG Set of capacity 100 KVA to 63 KVA

All as per Srl item No 55 here-in-before but for DG Set of capacity 30/40 KVA

M & L for replacement of asbestos rope dry round type 12 mm dia, conforming to IS No. 4687 of 1995, make champion, wound over exhaust pipe of DG set of any capacity complete all as specified & directed .

M & L for replacement of battery terminals brass with steel nuts, bolts & washers complete all as specified and directed.

S & F of change over switches 100amp, TPN, 415 Volts with sheet steel enclosure. Make : ABB/C&S/HPL/Havells/Indo Asian.

All as per Srl item No 60 here-in-before but 125amp.

All as per Srl item No 60 here-in-before but 250amp.

All as per Srl item No 60 here-in-before but 400amp.

M & L for replacement of on load change over switch 4 poles, 415 Volts, 160amp complete all as specified and directed. Make :- L&T / HPL / Schneider.

Supply and fixing of soft starter of capacity 75 Amp, 415Volt, 50 Hz in replacement of old soft starter including the connection items for the pump all as directed by Engineer-in- Charge.

M&L XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade 25sqmm 3.5 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and n exc 1.5 min depth for in soft loose soil including cutting road surface for poles stay, cables, pipes etc getting out complete all as specified and directed.

M&L XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade 35 sqmm 3.5 core complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers nexc 25 cm thick in soft loose soil complete all as specified and directed.

Removal of excavated surplus/spoil on a distance n.exc 50 m and deposting where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Supply and lay brick common burnt sub class "B" old size for protection of cables laid in trenches complete all as specified and directed.

M&L sand cushioning to under ground cable using dry river sand to full width of trenches complete all as specified and directed. Note : Finished punned down thickness shall be considered for calculation of volume and payment

M & L for earthing complete with galvansed steel earth plates electrode 60cmX600cmX6mm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below the ground level ) with edge of the plate not less then 1.5 mtr below the ground level connection to GI galvanised Iron strp 25mmX3mm as earthing lead by means of bolts/nuts chick nut & washers of GI or steel all ghown in electrical plate No 5 of SSR part I connection to feeder piller all as specified including watering GI pipe 40mm bore medium grade PCC chamber using PCC 1:3:6 type C2 C1 cover funnel & wire mesh all as specified & directed by Engr-in-charge

M&L LED display conforming to A15004 Part 3 with Hindi/English letters, scrolling, flashing mode and variable brightness. Aluminium cabnit with powder coated finish and toughonal glass front with 50 mm mounting arrangement in steel (3 on grade).

Supply only copper sulphate of approved make by HQ E-in-C's Branch.

Supply only Soda ash made of 100% sodium cabonate all as specified and directed. Make :- Tata Chemicals/Gracim / Approved ISI brand.

Supply only Chlorine test kit with coloured ample complete with all testing fitmtnts and OT solution in Rexine finish box. Make :- CHLOROMAX or equivalent and approved.

Supply only water suction PVC hose pipe 50mm (2) dia ISI 2482/90. Make :- Deep/Jyoti

Supply only nylone rope 25mm dia. Of approved quality.

Supply only calcium based granule dis-infectant for water treatment more stable than chlorine gas and stronger than bleaching powder and sodium hypo chloride (Packing in 45Kg Plastic drum) complete all as specified and directed. Make : As per approved make by HQ E-in-C's branch.

Aluminum ferric white (Crystal type) make as per approved make by HQ E-inC's Branch.

Supply only bleching powder Gde-ll confirming to IS-1065/89 revise with minimum chloride available 33.3% packed in 25/50 kg tight screwed bags complete all as specified and directed. Make : As per approved make by HQ E-in-C's Branch.

Comprehensive maintanance of stretcher lift at 172 Mil Hospital , Tibri of Make: OTIS ,including periodical inspection and servicing, replacement of minor defective parts, safety test etc complete all as per manufacture's offer all as directed by Engineer-in-charge

Supply and fixed the following items to be carried out to the subject Machine No F00216 of the above lift :- Kit door guide/ shim / Hardware

Car ceiling for BED Elevator 15 Psgr

Electronic door protection complete

Car Header with motor and drive

Infrared Senson of closing and opening of door

Wiring of the Lift Panel upto the Header of the lift door with control wiring and repalcement of the defective parts of the panel including contactors, timer, phase preventor, relay etc and testingof the panel for improved performance all as directed by the Engineer-In-charg e

Mounting Sundries

Supply and fixing of lift operation drive all as directed by enginer in charge

Supply and fixed fire alarm control panel complete industrial type of 8 zone conventional ,electronic candel lamp test controls lcd display, battery backup complete including testing for no faults all as directed and specified

Supply and fixed electronic hooter industrial type of range 5 KM single phase 230 volt ,6000 RPM aluminium body completeall as directed and specified

Supply and fixing of suction sweeper including electric motor of 3 HP capacity, suction provision, electric cable, angle iron frame and wheel all as directed by Engineer in charge

Repair / serviceing of DOL Starter of pump motor of swimming pool including replacement of burnt items, defective parts etc all as directed by engineer-in-charge

Disconnecting and taking out pump motor of capcity 10-15HP from existing position, dismantaling the burnt motor, rewinding the motor with super enamelled copper winding wire as per existing gauge, size including insulation material cotton tape, varnish , insulation paper , sleevs, lugs etc and testing for improved performance as per the satisfactio of Engineer-in-charge

Supply and fixing in replacement of Nylon brush of superior quality for suction sweeper machine of existing size directed by Engineer-in-charge

Supply and fixing of PVC pipe flexible type as per existing of size 40/50mm dia all as directed by Engineer-In-charge

Supply and fixing of pressure gauge of range 0 to 100 Kg/CM2 of existing make all as directed by Engineer-in- Charge

Supply & fixing sluice valve 200 mm bore PN 1.6 complete all as directed and specified

Supply & fixing Non return valve 200 mm bore PN 1.6 complete all as directed and specified

Supply and fixing of CI fittings including T, bends, nippel, coupling etc all as directed

M & L for opening the filter media tank of swimming pool and making visit of the OEM rep at site and assessment of the repair items required to improve the filteration of the filter media tank, replacement of the filter bed and filter media if directed by the OEM rep and testing of the filteration plant with improved performance all as directed and specified

M & L for cleaning of UG sump of capacity 50000 Gallons (Swiming pool collection sump) as described below ):- (i) Dewatering with submersible / sludge pump to empty the sump tank upto base level (ii) Removing sludge from sump wall and bottom with the help of special sledge pump and remaining dirt which may have hidden in rogh slots of the bottom mannually with brush (iii) After cleaning the sump apply bleaching powder for disinfection of sump (iv) The sludge / waste removed from the sump shall be disposed off in dumping ground as directed by Engineer - in - charge

M&L air termination single pointed aluminium rod,30 CM long of dia 12mm including insulators completeall as directed and specified

Supply and fixing aluminium strip 25mm x 3mm complete with saddle and fixing screws for fitting strip.

Supply and fixing GI strip 32mm x 6mm complete with saddle and fixing screws for fitting strip.

Supply and fixing test point terminal block made of GI plate size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex.head screw all as specified and directed

Supply installaton commissioning and testing of All in One solar street lighting system complete with solar Panel, with IP 65 protection, solar panel, battery, charging circuit, LED driver are integrated in single casing, mounted on existing pole, connecting cable battery box reflector on its back including LED light of 40 W and above, Aluminum alloy case, built in pipe mounting bracket, 120degrees wide lighting angle, efficiency min 95% . Make : Syska/Inter Solar/Bajaj or equivalant

Supply and fixed in replacement of chemical dozing (metering) pump electromagnetic type cheminject model SSAPS DP cap 0 to 10 LPH working pressure complete with suction & discharge tubing diaphragm valves, dosing injector etc complete all as specified and directed. Make:- Candy filters/ Sathya Sai Aquapure.

Supply and fixing in replacement of flat submersible electric cable,spl PVC insulated,(56/0.3 No/diamm) with bare bunched copper conductor for submersible pump,1100 volts grade, 3 core, cross-sectional area 4 sqmm.

All as per Srl item No 111 here-in-before but cross-sectional area 6 sqmm (84/0.3 No/diamm).

All as per Srl item No 111 here-in-before but cross-sectional area 10 sqmm (80/0.4 No/diamm).

Supply & fixing LED emergency light(rechargeable type with 51 LED power requirement 100-230 v complete all as directed make PHILIPS model 30753 emergency lights (white) or equivalent of make :- CG/Bajaj

S & F MCCB 250 Amp 25 KA 415 volt FP adjustable thermal& fixed Magnetic setting phase indication lamps

S & F MCCB 160 Amp 25 KA 415 volt TP adjustable thermal& fixed Magnetic setting phase indication lamps .

S & F MCCB 100 Amp 16 KA, 415 volt FP adjustable thermal& fixed Magnetic setting phase indication lamps

Supply & fixing Voltmeter 0 to 500 volts mechanical type with slector switch complete all as directed and specified

Supply & fixing Ampere meter 0 to 250 Amp mechanical type slector swtich complete all as directed and specified

Supply & fixing sluice valve 100 mm bore PN 1.6 complete all as directed and specified

Supply & fixing Non return valve 100 mm bore PN 1.6 complete all as directed and specified

Supply, installing , testing and commisioning factory made outdoor type dust and vermin proof LT panel board cubical type double door hinged type compartmentised of suitable size 415 volts, AC 50 Hz made of CRCA sheet 3.15 mm thick machine pressed and angle iron frame work of szie 40x40x6.0 mm grouted in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates ) sheet powder coated inside and out side complete including 4 pole copper bus bar of capacity 200 amp mounted on procelain insulators enclosed in chamber and connection from incoming and outgoing electric cable with suitable size of thimbles /lugs with openable shutter on both sides and comprising of the following:- (i) Incoming MCCB 4 Pole 160Amps capacity - 01 Nos (ii) Outgoing MCCB 4 pole 100 Amps capacity - 03 Nos (pump) (iii) Starter for the pump of capacity upto 15HP - 03 Nos (Pumps) (iii) single phase preventor - 01 Nos (iv) Phase corrector and capacitor - 01 Each all as dircted by Engineer in charge Note: Drawing of the LT Panel should got approval of Engineer in Charge before manufacturing.

Supply and fixing of fire bricks of primary and secondary fire chamber in double layer by removing the old damaged bricks and testing for fire resistance all as dircted by Engineer-in-Charge.

Supply and fixing of temp control gauge as per existing all as directed

Supply and fixing of ID fan of primary chember all as directed

Repair / replacement of glass type control wiring of control panel and of whole plant with new wire including testing all as direced by Engineer-in-Charge

M & L for painting of the whole chimney of the incenerator by scrabing out the old paint and preparing the surface for new painting, applying one coat of red enameled paint and two coat of sliver colour glosy paint, scrubing out the old paint of existing primary, seconday chember, ID Fans, Motors, Sign boards, Pipes, Angle Irons, Channels etc and applying two coats of Alluminium paint with all colour coads with the full satisfaction of engineer in charge all as dircted and specified

Repair to the contrrol panel of the plant by disconnecting all the electric connection and repalcement of all defective contractors, auxilary blocks, relays, wiring etc with the full satisfaction of engineer in charge

M & L 3 pole power contractor MNX - 45 of make L&T or equivalent all as directed by Engineer - in - Charge

M & L 3 pole power contractor MNX - 25 of make L&T or equivalent all as directed by Engineer - in - Charge

M & L 3 pole power contractor 3TF 35 of make Siemens or equivalent all as directed by Engineer - in - Charge

M & L of overload relay of range 15-25 Amps capacity all as directed by Engineer in Charge

M & L of overload relay of range 30-50 Amps capacity all as directed by Engineer in Charge

M & L of 3 phase Timer, 230 Volt, 50 Hz, Amps 15 upto 50Amp capacity all as directed by Engineer in Charge

M & L of single phase preventor 230 Volt, 50 Hz all as directed by Engineer in Charge

Supply and fixing in replacement of push button of Red, green, and exiting colour 230 Volt all as specified and directed

Repair / serviceing of the firing motor of the incenerator including repair / replacement of the solenoid valves, transformer, relays, winding etc with full satisfaction of the Engineer - in - charge all as directed

Supply and fixing in replacement of heating elements suitable for drying tumbler of 20 kg capacity all as specified and directed

S&F automatic voltage regulator suitable for 100 KVA Servo Voltage Stabilizer all as directed by Engineer in Charge

Taking out, dismantaling the Servo Voltage Stabilizer from foundation and transporting the same to workshop, taking out of all burnt winding wires by strip opening of 3phase voltage stabilizer of any make, rewinding the stabilizer with super enamled copper winding wire of required gauge and quantity including varnishing insulation sheet cotton, glass sleave etc as required, reassembling,testing, transporting back to site from workshop, installing back and making connection and again testing for 100 KVA Servo Voltage Stabillizer for improved performance all as specified and directed by Engineer-in-Charge

Supply and fixing in repalcement of digital type voltmeter of range 0 to 500 Volt, single phase, 50 Hz all as directed by Engineer-in-Charge

Supply and fixing in repalcement of digital type Ammeter , single phase, 50 Hz all as directed by Engineer-in-Charge

Copper winding wire of different gauge and size for servo voltage stabilizer, alternator rewinding and other works as directed by Engineer-in-charge

S & F transformer oil for voltage stabilizer all as directed by Engineer-In-charge

M & L for cleaning of UG sump of sewage collection sump of capacity 50000 Gallons (Sewage collection sump) as described below ):- (i) Dewatering with submersible / sludge pump to empty the sump tank upto base level (ii) Removing sludge from sump wall and bottom with the help of special sledge pump and remaining dirt which may have hidden in rogh slots of the bottom mannually with brush (iii) After cleaning the sump apply bleaching powder for disinfection of sump (iv) The sludge / waste removed from the sump shall be disposed off in dumping ground as directed by Engineer - in - Charge

Supply and fixing of control wiring cable of sewage pump meter terminal to LT panel of size 6 Sqmm of 10 Nos wires for control wiring complete all as specified and directed by Engineer-in-Charge.

M&L for fixing of new landing door of the lift cabin installed at 172 MH of stainless steel door with warranty of minimum one year of smooth functioning complete all as directed by Engineer-in-Charge.

M&L for fixing of new landing frame of the lift installed at 172 MH of made out of iron material with warranty of minimum one year of smooth functioning complete all as directed by Engineer-in-Charge.

M&L for fixing of new lift car front panel installed at 172 MH of made out of stainless steel with warranty of minimum one year of smooth functioning complete all as spcified and directed.

M&L for fixing of new lift operating drive of all as directed by Engineer-in-Charge.

M&L for fixing of new control panel of two opening OTIS lift including contractors, relays, phase preventer etc and all safety items required for smooth functioning of the lift all as directed by Engineer-in-Chage. Make :- Adico/ DV Electric/ Standard.

M&L for fixing of new limit switches for proper stopping and maintaining the safety of the lift with two openings all as directed by Engineer-in-Charge.

P S BUILDERS

Sharma Electrical and Engineering Works