Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 CrAdmitted-Finance | ₹3.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.0 CrAdmitted-Finance A 45 NTPC VIDYUT NAGAR DADRI GB NAGAR 201008 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201008 | ₹3.0 Cr | L2 | Admitted-Finance |
| 3 | L3₹3.1 CrAdmitted-Finance | ₹3.1 Cr | L3 | Admitted-Finance |
| 4 | L4₹3.2 CrAdmitted-Finance 3RD FLOOR CHANAKYA COMPLEX NR VANIYAVAD CIRCLE COLLEGE ROAD NADIAD 387001 GUJARAT INDIA | NADIAD | KHEDA | GUJARAT | 387001 | ₹3.2 Cr | L4 | Admitted-Finance |
| 5 | Rejected-Technical | - | - | Rejected-Technical Disqualified for not having sufficient Average Annual Turnover during last three years as per PQR of e-NIT |
| Sl No | Description | Qty | Unit | UNITED ENGINEERING L1 | POWERTECH ENGINEERING CO L2 | Cubix Engineering Solution L3 | GIMS ENERGY PRIVATE LIMITED L4 |
|---|---|---|---|---|---|---|---|
| 1.00Part-A: Lump-sum rates for Overhauling of Boiler Pressure Parts, High Pressure Valves, Burners, Wind-Box, Restoration of Drip Seal Shield Assembly, Revival/Re-Installation of ERVS, Revival of Dummied Reducers in penthouse, Restoration of sagged roof of penthouse and providing cup-lock Scaffolding inside the Furnace during forthcoming overhauling of Unit # 2 of 2x600 MW, RGTPP, Khedar, Hisar. | |||||||
| 1.01 | A1: Total lump-sum rate for overhauling of boiler pressure parts, high pressure valves, burners, wind-box, restoration of drip seal shield assembly, revival/re-installation of ERVs, revival of dummied reducers inside penthouse, restoration of sagged roof of penthouse, installation of new motorized valves of make M/s BHEL, repair/hard-facing of coal compartment assemblies and application of ceramic blanketing (as per scope of work). | 1 | Job | 2,37,00,000 ₹2.4 Cr | 2,24,00,000 ₹2.2 Cr | 2,47,50,000 ₹2.5 Cr | 2,23,00,000 ₹2.2 Cr |
| 1.02 | A2: Lump-sum rate for supply, erection and dismantlement of cup-lock scaffolding (as per scope of work). | 1 | Job | 52,00,000 ₹52 L | 57,00,000 ₹57 L | 48,50,000 ₹48.5 L | 74,00,000 ₹74 L |
| 2.00Part-B Rates | |||||||
| 2.01 | HP joint including cutting, edge preparation, pre-heating, post-heating, heat treatment using thermal gun or flame torch etc. up to 80 mm for metallurgy other than SA213-T91 | 500 | Nos. | 200 ₹1 L | 300 ₹1.5 L | 400 ₹2 L | 700 ₹3.5 L |
| 2.02 | HP joint including cutting, edge preparation, pre-heating, post-heating, heat treatment using thermal gun or flame torch etc. up to 80 mm for metallurgy SA213-T91 | 10 | Nos. | 250 ₹2,500 | 400 ₹4,000 | 500 ₹5,000 | 700 ₹7,000 |
| 2.03 | Metal build up on worn out tubes. Each build-up of size 100mmX25mm shall be considered as 01 no. build up | 1,200 | Nos. | 100 ₹1.2 L | 900 ₹10.8 L | 400 ₹4.8 L | 675 ₹8.1 L |
| 2.04 | Lowering of any eco coil (upper & lower) repositioning after carrying out work/replacement wherever required. HP joints excluded. | 4 | Nos. | 500 ₹2,000 | 2,000 ₹8,000 | 3,000 ₹12,000 | 1,500 ₹6,000 |
| 2.05 | Lifting of any LTSH coil (upper & lower) repositioning after carrying out work/ replacement wherever required. HP joints excluded. | 3 | Nos. | 500 ₹1,500 | 2,000 ₹6,000 | 3,000 ₹9,000 | 1,500 ₹4,500 |
| 2.06 | Replacement of damaged skin casing /welding | 15 | per sq. meter | 100 ₹1,500 | 100 ₹1,500 | 200 ₹3,000 | 600 ₹9,000 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹7.3 L
Closing Date
29 Dec 2025, 11:00 amClosed
RAKESH HARSH
CE RGTPP Khedar Hisar
Overhauling of Boiler Pressure Parts, High Pressure Valves, Burners, Wind-Box, Restoration of DSS Assembly, Revival or Re-installation of ERVS, Revival of Dummied Reducers, Restoration of sagged roof during forthcoming OH of Unit 2, 2x600 MW RGTPP
2025_HBC_483221_1
202548E58711 5F5B 4624 9C31 B06214271330712PGC
Open Tender
Power/Energy Projects/Products
60 days
KHEDAR
as per attached tender document
2 documents required · 2 mandatory
₹1,180
₹7.3 L
Yes
27 Mar 2026
13 Nov 2025
2 Jan 2026
13 Nov 2025
29 Dec 2025
13 Nov 2025
A1: Total lump-sum rate for overhauling of boiler pressure parts, high pressure valves, burners, wind-box, restoration of drip seal shield assembly, revival/re-installation of ERVs, revival of dummied reducers inside penthouse, restoration of sagged roof of penthouse, installation of new motorized valves of make M/s BHEL, repair/hard-facing of coal compartment assemblies and application of ceramic blanketing (as per scope of work).
A2: Lump-sum rate for supply, erection and dismantlement of cup-lock scaffolding (as per scope of work).
Part-B Rates
HP joint including cutting, edge preparation, pre-heating, post-heating, heat treatment using thermal gun or flame torch etc. up to 80 mm for metallurgy other than SA213-T91
HP joint including cutting, edge preparation, pre-heating, post-heating, heat treatment using thermal gun or flame torch etc. up to 80 mm for metallurgy SA213-T91
Metal build up on worn out tubes. Each build-up of size 100mmX25mm shall be considered as 01 no. build up
Lowering of any eco coil (upper & lower) repositioning after carrying out work/replacement wherever required. HP joints excluded.
Lifting of any LTSH coil (upper & lower) repositioning after carrying out work/ replacement wherever required. HP joints excluded.
Replacement of damaged skin casing /welding
FIN welding
Repair/replacement of high pressure piping hangers. (MS, HRH & CRH)
Repair/replacement of auxiliaries piping hangers.
Fabrication of high pressure bends with diameter up to 70 mm & thickness up to 5 mm
Making space in 01 no. LTSH coils in order to facilitate/To Carry out in build-ups/joints in these coils by pulling the adjacent LTSH coils with pulling & lifting machine after cutting the hanger tubes if required
Servicing of wall soot blower including lance replacement if required.
Servicing of long retractable soot blower
Complete servicing & commissioning of long retractable soot blower which includes replacement of burnt out lance & other spares and its alignment.
Casting of refractory
Providing shields on tubes
Providing of cassettes baffles for Economizer.
Providing of cassettes baffles for LTSH.
Cutting of hand hole plate & its re-welding
Repair of header by weld overlay/metal build-up
Replacement of Steam cooled spacer tubes as per scope mentioned in main scope of work
Replacement of complete loop of divisional SH panels as per scope mentioned in main scope of work
Replacement of complete loop of divisional SH panels as per scope mentioned in main scope of work
Replacement of drip seal shield
Restoration of sagged tubes in radiant roof
Servicing of Drum Safety valves
Servicing of Super Heater Safety valve
Servicing of H.R.H. Safety valve
Servicing of C.R.H. Safety valve
Servicing of ERV Safety valve
Servicing of Pneumatic Control Valve
Servicing of LP Valves, Size Up-to 25 mm.
Servicing of LP Valves Size 25 mm to 40 mm
Servicing of LP Valves, Size 50 mm to 100 mm
Servicing of LP Valves, Size 150 mm to 200 mm
Servicing of High Pressure valves up to 25 mm
Servicing of High Pressure valves 25 mm to 50 mm
Servicing of High Pressure valves 50 mm to 100 mm.
Servicing of High Pressure valves 100 mm to 150 mm
Servicing of High Pressure valves 150 mm to 350 mm
Servicing of 600 NB motor operated 1 No. main feed line valve & its actuator
Servicing of peep holes / manholes
Replacement of valves/bends/ 1mtr. Length pipeline by cutting, welding, grinding and fit-up work for each job (for valves & bends)/per mtrs (for pipeline) by certified IBR welder upto 25 mm
Replacement of valves/bends/ 1mtr. Length pipeline by cutting, welding, grinding and fit-up work for each job (for valves & bends) / per mtrs (for pipeline) by certified IBR welder, 25 mm to 80 mm
Replacement of valves/bends/ 1mtr. Length pipeline by cutting, welding, grinding and fit-up work for each job (for valves & bends) / per mtrs (for pipeline) by certified IBR welder, 80 mm to 200 mm
Repair/servicing of oil Burner valve and replacement if required.
Removal of oil tip & its refitting including alignment.
Removal of air tip & its refitting including alignment.
Replacement of wind box expansion joints
Retention /early removal of cup lock Scaffolding (kindly refer Note 5 of point No. 7 in main scope of work)
Man hour rates (including T&P, gas, consumables) Skilled labour/welder
Man hour rates (including T&P, gas, consumables) semi-skilled
Man hour rates (including T&P, gas, consumables) Un skilled
Supply of Holdite
LED Flood light of rating 120W
LED Flood light of rating 80W
LED Flood light of rating 24W
Halogen light of rating 1000W
Halogen light of rating 500W
Extension boxes of size Metallic/50 with ELCBs
Repairing and hard-facing of coal nozzles
Repairing and hard-facing of SS tips
Deployment of jet cleaning machine
I -Beam (200MM)
L-Plate (Base plate) 150 X 350MM
Base channel (100MM)
Binding wire
Coconut rope
Restoration of bent roof of pent house
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.49 MB
BOQ_561222.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid