REPAIR REPLACEMENT OF OLD CONVENTIONAL LIGHT FITTINGS WITH ENERGY EFFICIENT LED LIGHT FITTINGS AND MISCELLANIOUS E M WORK IN BOWENPALLY AREA UNDER AGE E M N OF GE N SECUNDERABAD

Amount

Taking down the existing unserviceable point wiring of any description, type, size of light or fan or power or two way or bell etc on TW batten or conduit including removal of batten or conduit or gutters or wooden boards or switches or sockets or regulators or light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall or ceiling to match with the existing surfaces complete all as specified and as directed.

M & L for Point wiring with 1.5 Sq mm FRLSH copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through and including rigid 20 MM PVC CONCEALED conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLSH copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for one Light/bell Point Controlled by One Switch complete all as specified and directed. NOTE: Modular Cover Plate is inclusive of the rated quoted by the contractor

All as per Item No.2 above but One ceiling fan/exhaust fan point controlled by one, one way switch 5 amps, single pole and regulator complete all as specified and directed.

All as per Item No.2 above but One 3 pin 5 amps switch socket out let point controlled by one switch on independent board complete all as specified and directed.

All as per Item No.2 above but One 3 pin 5 amps switch socket out let point controlled by one switch on same board complete all as specified and directed.

All as per Item No.2 above but One light point controlled by two, two way switch 5 amps, single pole complete all as specified and directed.

All as per item No. 2.00 here in before but using 2.5 sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade FRLSH confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 2.5 square millimetre copper conductor PVC insulated cable FRLSH as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

S&F Modular switch 1 way 6 A, 1 module capacity 230 volts complete all as specified and as directed

S&F Modular socket 5 pin 6 amps 2 module, 230 Volts complete all as specified and directed.

S&F Modular socket 6 pin 6/16 amps 2 module, 230 Volts complete all as specified and as directed.

S&F Electronic ceiling fan regulator modular 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.

S&F Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.

S&F Switch modular 1 way 16 amps, 230 Volts on existing board including taking down complete all as specified and as directed.

&F Switch modular two way 6 amps, 230 volts, 1 module complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Vertical type TPN distribution board of 4 way double door with incoming MCCB TPN 415 volts AC, 3 phase, 50 Hz, 25 KA Breaking Capacity with fixed magnetic setting for current rating of capacity 100 Amps including MCCB TPN conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommadated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement and taking down old unserviceable DB complete all as specified and as directed. Make : Havells-Cat Part No VTPN_DHDLVDRWGOF O04 & MCCB Cat No - IHLGHF0100, Standard Cat No - DSDLVDRBAOFO01 & MCCB Cat No - ISLASF0100, C&S Cat No - CSDBMCCB100DD041P43S & MCCB Cat No - CSC3S4100.

S&F Sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar of 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed. Make : Havells - CAT Part No DHDPSHODRWO8, Standard Cat No - DSDCSHODOW08, C&S Cat No - CSDBSPNPDD08.

S&F MCB SPN 40 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed. Make : Havells Cat No DHMGCSNF040, Standard Cat No - DSMGCNF040, C&S Cat No - CSMBS1C40N.

S&F MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed. Make : Havells - Cat No DHMGCSPF006-032, Standard Cat No - DSMGCSPF006-032, C&S Cat No - CSMBS1C6-32.

Material and labour for sub main wiring with two runs of single core FRLSH PVC multistranded stranded unsheathed copper conductor cable of size 6 square mm and drawing through CONCEALED PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

M&L Sub main wiring with two runs of single core FRLSH PVC multistranded stranded unsheathed copper conductor cable of size 4 square mm and drawing through CONCEALED PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

S&F replacement MCB TP 63 amps 415 volts suitable for fixing in MCB DB complete all as specified and as directed. Make - Havells Cat No - DHMZCTPF063, Standard Cat No - DSMGCTPF063, C&S Cat No - CSMBS3C63.

S&F in replacement MCB TPN 63 amps 415 volts suitable for fixing in MCB DB complete all as specified and as directed. Make - Havells Cat No - DHMZCTNF063, Standard Cat No - DSMGCTNF063, C&S Cat No - CSMBS3C63N.

S & F in repair fresh air fan alongwith shutter of size 200mm sweep, 35 watts, RPM 1290 complete all as specified and directed.

M&L Sub main wiring with two runs of single core FRLSH PVC insulated, multistranded unsheathed copper conductor cable of size 2.5 square mm and drawing through PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 2.5 square mm FRLSH PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 2.5 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

S&F in replacement energy saving downlighter surface mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver. Make: Havells:EDGESURFACERDDLR12WLED840S or equivallent in Wipro/Phillips

S&F Wall mounted box type LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired box type etc complete with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : Havells cat No-REGALBATTENT8UPTO1X22WSSBSWHor equivalent in Wipro & phillips.

S&F in replacement recess mounting with perforated sheet with electronic driver luminaire 36 watts LED slim panel (2'x2') with central opal diffuser series mounted in grid ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make - Havells Cat No - STARTO2X2PLR36WLED857MOD incl driver LED DRIVER36V36WS, or equivalent in Wipro & phillips..

S&F in replacement surface mounting with perforated sheet with electronic driver luminaire 36 watts LED slim panel (2'x2') with central opal diffuser series mounted in surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make - Havells Cat No - PLUTOSURFACE2X2PLS34WLED857S, or equivalent in Wipro & phillips.

Supply anf fix in replacement LED security light luminaire fitting of 1x25 watts with deep drawn housing including all accessories complete all as sepcified and as directed. Make - Havells Cat No - ENDURSUNDOWNSL25WLED765PASYBOPCIHD,or equivalent in Wipro & phillips.

S & F in replacement GI bracket 40 mm dia 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts including taking down existing unserviceable bracket complete all specified and direded.

S & F in repair Environmental fridendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs all as specified and directed. Make - Havells Cat No RUGBYGENXFTS10WLED865SSYMBOPC, or equivalent in Wipro & phillips.

S&F Wall mounted LED Batten, extruded PC housing heat sink provided for efficient heat dissipation & intergated electronic driver 1x10W, 230 Volts, DIFFUSED TYPE connector block, internally pre wired etc complete with 2 Nos PVC round blocks for mounting arrangements including new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. MAKE: Havells Cat No- LUMILINEPLUSBS10WLED865SPCSS,or equivalent in Wipro & phillips.

S&F Wall mounted light fitting suitable for 1x10 Watt LED Bulb including taking down existing unserviceable light fitting complete with all accessories complete all as specified and as directed. MAKE: Havells Cat No LHDL06160099, or equivalent in Wipro & phillips.

S&F Slim LED lighting fixture 20W with high lumen output inverter type batten with square profile and polycarbonate channel. Lithium ion battery with charging time 8hrs-10hrs and back up time upto 4hrs including connector block, internally pre wired etc complete with 2 Nos PVC round blocks for mounting arrangements including new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Havells-LHEXACP7FN1W020 or equivalent in wipro/phillips.

Dismantling/taking down old/UNSV distribution panel and supply, fixing and testing of indoor 3 phase LT distribution panel board factory, made out of 2mm thick CRCA sheet CPRI approved of size not less than 600x450x200mm duly powder coated wall mounted/semi grouted in wall with locking arrangement double door type, compartmentalised and provision for tapping incomming & outgoing electric connections with suitable size of copper nut bolts & lugs, glands, one MCCB will be pre fitted/mounted on proper din rails and with earth link at top/bottom detachable plates and suitable for accomdating the following items complete all as specified and as directed.:- (a) Copper busbar strips for TPN of 200 amps rating (min length of 300mm) and connected with MCCB by spreader terminals. ( set of 4 strips). (b) Phase indicating lamp LED type - one set of 3. (c) MCCB 4 pole, 100 Amps rating 25/26 KA breaking capacity, 415 volts - 01 No. ( Make - HPL/C&S/Standard/) (d) MCB SPN 10 Amps 240 Volts 'C' curve - 01 No.

Taking down ceiling fans 48”/56” sweep or Exhaust fans upto 300mm, removing/cleaning of dust properly cleaning, greasing & overhualing of bearings including refixing in same location and connecting up all as directed by Engr-in-Charge. Note : Replacement of defective/worn out parts will be measured & paid for separately

Supply & replace 2.00/2.50 Mfd capacitor complete all as specified and as directed.

Supply & replace ball bearing (set of two)/Gun Metal Bush of exsiting ceiling fans on site .

S&F Replace M.S. rod for ceiling fans 3 ft long with both end suitable size holes and cut mark all as specified and directed by Engg in Charge

S&F Replace Nut of bolts washers for fan blades fixing of ceiling fan of any make/size/type as per site requirement ( 6 Nos for each set) complete, a suitable for existing ceiling fan on site.

M&L Rewinding of burnt Ceiling fan motor of size 48"/56" sweep with super enameled copper wire of suitable size as per details given below of any make, type, model incl transporation complete,all as specified and as directed by Engr-in-Charge.

M&L Earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 150mm centre to centre both ways with 8mm dia handle galvanised iron funnel with watering pipe, wire mesh, complete.

SRI SAI RAM ENTERPRISES

M/S P UDAY RAJ CONSTRUCTION

SUN LIGHT HOUSE

BHATNAGAR ASSOCIATES

K LAKSHMAN SINGH AND CO

MS ENTERPRISES

STANDARD AGENCIES

Sri venkateswara Electricals