ET-01/EMCC-I/PANKITEP/2024-25

Amount

Round the clock Routine, Preventive, Breakdown maintenance, operation and Up keeping works of TG area EOT cranes and General cleaning work of Main Turbine and it’s Associated auxiliaries like BFP, CEP, Vacuum Pump, Condenser, Heaters Tanks, Valves etc. of Unit # 1x660 MW, PANKI EXTN.

Round the clock Routine maintenance (in 03 shifts during running of unit or main turbine oil system in service) & Preventive Maintenance, and Equipment Cleaning work of Main Turbine and it’s Associated Auxiliary like BFP, CEP, Vacuum pump, DMCW Pump & other small pumps , in day shifts. (01 Job consists of 24 hrs. work for the Unit)

Operation of TG Hall EOT Crane

Operation of one No. TG hall EOT crane (Capacity 100/42T) (One job will be of 8 hrs duration operation)

Breakdown maintenance of Main TG area auxiliaries like BFP, CEP, Vacuum pump, DMCW Pump & other small pumps

Rev./ Replacement of DE Journal bearing of T-BFP/MDBFP BOOSTER PUMP

Rev./Replacement of NDE Journal bearing of T-BFP/ MDBFP BOOSTER PUMP

Rev./Replacement of NDE Thrust Bearing of TDBFP /MDBFP BOOSTER PUMP

Rev./Replacement of NDE Mech. Seal of TDBFP/MDBFP BOOSTER PUMP

Rev./Replacement of DE Mech. Seal of TDBFP/MDBFP BOOSTER PUMP

Inspection/ Minor Overhauling of Booster Pump of TDBFP/MDBFP

Rev./Replacement of DE Journal bearing of T-BFP/MDBFP FEED PUMP

Rev./Replacement of NDE Journal bearing of T-BFP/MDBFP FEED PUMP

Rev./Replacement of NDE Thrust Bearing of TDBFP /MDBFP FEED PUMP

Rev./Replacement of NDE Mech. Seal of TDBFP/MDBFP FEED PUMP

Rev./Replacement of DE Mech. Seal of TDBFP/MDBFP FEED PUMP

Thread out of BFP Cartridge

Thread in of BFP Cartridge

Miscellaneous revisioning work of Hydraulic coupling:

Revisioning of Thrust cum radial bearing no. 1 of BFP-Turbine

Revisioning of rear journal bearing no. 2 of BFP-Turbine:

Inspection/ Overhauling of Gear Box of BFP Turbine:

Inspection and rectification of Thrust and Journal bearings of condensate extraction pumps

Inspection and rectification of Thrust and Journal bearings of Drip Pump:

Rev/replacement of Mech. Seal of CEP:

Rev/replacement of Mech. Seal of Drip Pump:

Complete Overhauling of Condensate Extraction Pump:

Replacement of Condensate Extraction pump:

Complete Overhauling of Drip Pump:

Axial & Radial alignment of Horizontal equipment like MDBFP to Hydraulic coupling/ Hydraulic coupling to Motor/ Motor to Booster pump/ TDBFP to Drive Turbine/ Drive Turbine to Gear box/ Gear box to Booster pump

Complete servicing/overhauling of vacuum pump :

Replacement/Servicing of DE bearing of main vacuums pump

Replacement/Servicing of NDE bearing of main vacuum pump

Replacement of DE Mechanical Seal/ gland of Vacuum pump:

Replacement of NDE Mechanical Seal/ gland of Vacuum pump

Replacement/Servicing of white metal bearing of Motor. (Booster Pump side /Hydraulic Coupling side).

Servicing/Overhauling Portable Oil Purifier of MDBFP:

Overhauling of TDBFP/ Main TG - transfer oil pump/ Oil purifier Gear type oil pump

Axial and radial alignment of vertical Pumps like Tank mounted lube oil pump of Main TG/ BFPT & Condensate pump-CEP/Drip Pump

High capacity horizontal Pump Alignment

Low capacity horizontal Pump Alignment :

Replacement of coupling of equipment like MDBFP/ TDBFP/CEP/Drip pump/Vacuum Pump/DMCW pump/EOP/AOP of main turbine & BFP Drive turbine.

Arresting oil leakage through the felt ring of MOP of Main Turbine/ Drive Turbine:

Replacement of MOP/ EOP of main turbine/ BFP Drive Turbine (One job consists one pump):

Rev/Replacement of bearing of MOP/ EOP of main turbine/ BFP Drive Turbine/ MDBFP AOP (One job consists one pump):

Low capacity water & Oil service Pump Mechanical Seal replacement

Low capacity water & Oil service Pump Bearing replacement

Complete Overhauling/ Servicing of Low capacity water & oil service pump.

Repair/ Overhauling of DMCW Pump:

O/H of Vapour extractor of MOT/ Control Fluid Tank/ TDBFP Oil Tank/ GSC vapour extractor : (One job consists of one tank)

O/H of Sump Pump/ Dewatering pump:

Replacement/ Inspection/ Revisioning of EH control oil unit pump of Main Turbine/ HP bypass valve:

Checking & filling of N2 (Nitrogen) gas in Accumulators.

Replacement of N2 Bladders / Service of accumulators of Turbine system and its auxiliaries: (One job consists of one auxiliary)

Overhauling of Hydrazine/ Ammonia dosing pump:

TG Hall (100/42 MT) / BFP (65 MT) EOT Crane- Attend defect

Inspection, Testing & Issue of required Statutory test certificate for TG Hall (100/42 MT) / BFP (65 MT) EOT Crane

Breakdown maintenance work of TG Area: Tanks/ Heaters/ Strainers/Condenser Jobs

Replacement of the Burst Atmospheric relief Diaphragm of LP Turbine/ Drive Turbine.

Inspection of last stage blades of LP Turbine and minor repair work if required.

Oil Replacement/Tank cleaning & Minor revisioning of Main Turbine EHC unit Oil /Turbine HP Bypass Oil:

Preservation of Steam turbine: HP/IP/ALP/BLP/Condenser/LPH1 & 2

CEP /BFP BP/DMCW pump (SUC STRAINER) Cleaning

BFP Main pump Suction Strainer Cleaning

MOT Duplex Filter/ Return oil MOT strainers Cleaning

Centrifuging of Lub Oil through Portable Centrifuging machine

Bowl cleaning of Portable centrifuge

Cartridges replacement/ revisioning/ cleaning of Main Turbine/Drive Turbine/CLOST Oil Conditioners

Inspection/ cleaning, flushing and normalization of Deaerator.

Inspection/ cleaning, flushing and normalization of Condenser hot well (one Condenser)

Condenser water box cleaning TG (Both sides) of one pass.

Inspection, cleaning and adjustment of Condenser COLTCS Screen.

TANK Cleaning-TG DMCW O/H tank / Both LP & HP Dosing Tank / Drip tank/ flash tank/ Lube oil unloading tank etc. (either of LP/HP/Atm FT)

Inspection and Cleaning of MOT Tank/COT/DOT Tan

Inspection and Cleaning TDBFP MOT Tank

Inspection/ Cleaning of MOT Oil Plate Heat Exchanger

Inspection/ Cleaning of MDBFP & TDBFP Lube oil /working oil Plate Heat Exchanger

HP Heater / LP Heater /DE superheater /GSC Internal inspection/servicing/ Attending tube leakage

HP Heater/ LPHeater /DE Superheater/ GSC manhole door gasket replacement.

Tube & Shell type cooler cleaning, Tube leakage checking and plugging:

Cleaning of sump pits of T/G Area.

Filling, Flushing and normalization of DMCW System

Performing of system vacuum and Condenser tube leak test and attending all the leakages by plugging and welding, if any.

Hanger Check/ Attend defect:

The work of revisioning/ servicing of ball collector of condenser tube cleaning system

The work of inspection/ minor repairing of ball catch strainer of condenser tube cleaning system

Cleaning of CEP Pit/ Condenser Pit/ BFPT Pit/ MOT Pit

Breakdown maintenance work of TG Area: Servicing/ overhauling of Valves/ NRV/PRV

Main TG/BFPT: MSV/MCV servomotor servicing

HP/LP Bypass valve servicing.

Servicing of motor operated control valve, motor operated gate/globe valves, manually operated gate/globe valves, check valves of Oil, Condensate, feed water, steam, CW, DMCW, ACW line valves (except butterfly valves), LP Valve (Dia<6”)

Servicing of motor operated LP Valve (Dia 6- 12”)

Servicing of motor operated LP Valve (Dia>12”)

Servicing of motor operated HP Valve (Dia<6”)

Servicing of motor operated LP Valve (Dia 6- 12”)

Servicing of motor operated HP Valve (Dia>12”)

Replacement of gland packing of HP / LP Valves on per mm. dia basis of valve

Repair/ Replacement of LP piping by cutting & welding

Replacement of flange type gate / globe valves/butterfly valves of LP lines

High pressure TIG Welding per one inch dia pipe basis. ( Proportionate payment shall be done for other sizes)

Safety Valve Servicing: (1”-4”)

Safety Valve Servicing: (>4”-8”)

Safety Valve Servicing: (>8”)

Revisioning / Servicing of Butterfly valves (Size: <6”)

Revisioning / Servicing of Butterfly valves (Size: 6-12”)

Revisioning / Servicing of Butterfly valves (Size: >12”)

Servicing of valve Gear Box (Size: Up to 12”)

Servicing of valve Gear Box (Size: > 12”)

Flange (Above DN300) Attend Defect

Replacement of flange gasket of HP/ LP valves & piping

Expansion Joints (UPTO 1000MM) Replacement

Breakdown maintenance work of TG Area: Replacement of Valves/ NRV/PRV & Miscellaneous work

LP Valve Replacement

HP Valve Replacement

Steam Piping Stress Relieving

Steam Piping (Dia>6”)Stress Relieving

Fabrication & Erection of Platform, Stairs, Rack on Tonnage basis

Erection of scaffolding

General cleaning of turbine area for 1x660 MW, PANKI EXTN.

Daily Cleaning work of all Floors, stairs, railings, trenches, doors etc in the turbine area.

Weekly Cleaning work of ventilation and cooling air ducts/ piping, columns, etc in the turbine area.

For Mechanized cleaning of T.G. Floors - 1x660 MW, ETPS: Frequency: Weekly

Routine and Preventive/Breakdown Maintenance of Main Boiler & its accessories Including Pressure Part , Soot Blowers, HP Valves, LP Water Pumps, Online sealing of Valves, Insulation Refractory works etc and Daily Routine Maintenance of Main Boiler as well as Auxiliary Boiler and cleaning activities of these in general shift of 1X660 MW, PANKI THERMAL EXTENSION PROJECT PANKI KANPUR for a period of 02 Year.

Preventive/Breakdown maintenance of Pressure Parts

Attending tube leakage up to 1st ten H.P. weld joints. (irrespective of number H.P. weld joints in one frequency)

Attending tube leakages for each H.P. weld joints beyond 10 Nos. of H.P. weld joint.

Boiler HP Joint Radiography

Fixing of Scaffolding during Attending Tube Leakage.

Sky Climber Installation and Removal.

Eco Coils Attend defect online.

Stress Relieving of HP Joints.

Boiler (Tube Bends) Fabrication.

Boiler Segment Shield Welding.

Boiler Peep/Man Hole Attend Defect.

Hanger Inspection.

Hanger Servicing.

Preventive/Breakdown maintenance of soot blowers.

Wall Blower/LRSB Over hauling

Attending Defect of Soot Blower Valve

Wall Blower Servicing.

Operation & Maintenance of LRSB.

Flange (Gasket) Replacement of soot blowers.

Preventive/ Breakdown maintenance of sky climber

Testing of Sky climber after installation.

Over hauling of Sky Climber.

Removal of Honey comb from Boiler.

Over Hauling/Servicing of HP Valves.

Overhauling of Safety Valve.

Overhauling of Control Valve size up to 6".

Servicing of HP Valve size up to 6"

Servicing of HP Valve size above 6" to 12"

Servicing of HP Valve size above 12"

Servicing of NRV size 6" to 12"

Servicing of NRV size below 6"

Servicing of NRV size above 12"

Overhauling of E/M Relief Valve.

Gland Replacement of HP Valve.

Preventive/ Breakdown & Over hauling of Boiler fans.

Coupling and alignment of Fan.

Overhauling of Fan.

Checking and Fault removal of Oil gun assembly.

Preventive/Breakdown maintenance of duct & dampers

Attending defect of dampers and Gate.

Replacement of Damaged portion of Duct.

Repair of damaged Expansion Joints.

Preventive/ Breakdown maintenance of LP water pumps.

Servicing of LP Water Pump.

Replacement of LP Water Pump Bearing.

Replacement of LP Water Pump Gland.

Coupling and alignment of LP Water Pump.

Removal and Installation of Scanner hose/Purg air hose Pipe.

Preventive/ Breakdown maintenance of lube oil system of hydraulic valves.

Replacement of Lube oil Pump.

Over hauling of Lube oil System.

Alignment of Lub Oil Pump Coupling

Servicing of Electrical hoist (Load range 0.3 to 0.5).

Servicing of LP Valve size up to 6".

Replacement of LP Valve (Flange Type) size up to 6".

Insulation & Refractory of Boiler and Turbine area.

NDT (Die Penetration) DPT.

Structural Fabrication.

Online Leak sealing of HP Valve.

Attending defect of online

Ring Clamp(above 2") attend defect

Box Clamp(above 9") attend defect

Online Safety Valve set pressure verification and set pressure adjustment by Valtest method for safety Valve installed in Boiler area.

Safety Valve setting

Including Travelling charges with fare expenses issued.

Daily routine maintenance work scope including burners, scanner air fan, purge air fan, Checking of soot blowers, oil gun cleaning etc. in respect of Main boiler as well as Aux boiler work round the clock

Cleaning of boiler and other associated work of 1x660 MW as well as Aux boiler.

Round the clock operation and maintenance works of Bowl mill, Gravimetric coal feeder, Coal mill reject system, ID/FD/PA fan, Air Pre-heater, ECW and its associated system of 1X660 MW PTEP PANKI KANPUR for a period of 02 Year.

Round the Clock Routine, Preventive & Breakdown Mechanical Maintenance of Bowl Mill and Its Associated System as per Scope of Work And Bill of Quantity.

Inspection / Replacement Of Mill Coupling

Oil Replacements of Mill Roller Assly/ Gear Box/ Centrifuging of Oil

Replacement & Servicing of Bowl Mill Spring

Replacement of Bull Ring Segment

Adjustment/ Repair of Separator Body Assembly/ Classifier Servicing

MDV/ Burner Inlet Gate (Big)/ Variable Orifice/Transition Piece Replacement

Repair/Replacement of Scraper Assembly

Replacement / Checking of Labyrinth Seal Assembly per Mill

Mill Gearbox Input Shaft/ Bearing Replacement

Cleaning, Greasing, Servicing of Electrically Operated HOIST of MILLs. FD/ID/PA Fans/Economiser . Capacity (Nos.) :- capacity 60T (01), 22T(01), 5T(02), 20T(02),10T(01) 20T ( 02 no.) & capaciy 01T (10nos.)

Structure Fabrication

Replacement of Roller Journal Assembly. (One RJ Assembly makes One Job):

Changing Trunnion Position of RJ Assembly. (One Trunnion of One Mill makes One Job).

Replacement of Worn Out Grinding Roll with New/Healthy One including Servicing of RJ Assembly:-

Repair of Airport Ring Assembly. complete One Set (One Set consist of 06 pieces).

Repairing/Replacement of Bowl Extension Ring Segment.

Repairing Eroded Portion of Classifier Inner Cone

Complete Dense Hard Facing of Cap of Airport Ring Assembly & Extension Ring (with L&T-670/700 Hard Facing Electrode).

Servicing of Lube Oil System of Mills (One Mill makes One Job).

Servicing of Pressure Spring Assembly ( One Spring Assembly of any Mill shall be considered as One Quantity).

Replacement/Servicing of Journal Stop Bolt.

Checking/Replacement of (Leaking) Victaulic Coupling Rubber Gasket of MDV/ Transition Piece.

Replacement/ Refitting/Servicing of Classifier Blade

Replacement of Mill Side Liner

Repairing of Mill Side Liners by Patching/Welding

Repairing/Replacement of Mill Side Bottom Liner.

Checking / Replacement of Bottom Insulation Covers Plate ( Complete Set):-

Repairing of Bottom Insulation Cover Plate

Servicing of Seal Air Valve on Seal Air Header of Mills

Round the Clock Routine Maintenance of Bowl Mills, RC Feeder & Coal Pipes & Other Miscellaneous Work.

Cleaning/ Removal of Choking from the Split Raw Coal Pipe from Bunker Outlet Gate to Bowl Mill (Mainly During Rainy Season) choked due to Wet Coal in the form of Slurry/Sticky.

Breakdown Mechanical Maintenance of RC Feeder and Coal Pipe as per Scope of Work and Bill of Quantity.

Inspection and Maintenance Gravimetric Feeder

Replacement of Belt

Replacement of Belt Drive Reducer

Servicing of Belt Drive Reducer & Eddy Current Clutch Coupling

Replacement of Clean out Conveyor Drive Reducer

Servicing of Clean Out Conveyor Drive Reducer

Replacement of Head/Tail Pulleys/ Idlers/ Coc Shaft of Coal Feeder

Servicing of Feeder Inlet/Outlet Gates/ Bunker Outlet Gates

Feeder Bearing Replacement

Attend Breakdown of Feeder

Removal of choking from Coal Pipe

Replacement of Center Feed Pipe Coupling Area with SS Spool Piece

Replacement Coal Pipe Coupling Gasket/ Coupling Assy

Attending Coal Dust Leakage

Welding/ Patch Welding Work for Repairing

Straight Pipe Rotation/ Replacement of Pulverize Fuel Pipe

Coal Pipe Bend Replacement

Repairing/Adjustment of Fuel Piping Supports/ Hangers

Round the Clock Routine, Preventive & Breakdown Mechanical Maintenance of Coal Mill Rejects System and Its Associated System

Round The Clock Operation PLC (Auto) Room/ Manually from Mill Site and Compressor for Coal Mill Reject Handling System and Routine/ Preventive/ Breakdown Maintenance of Pneumatic Coal Mill Reject Handling System & Compressor with Air Receiver Tank and Air Pipe Lines etc. along with the House Keeping of Reject System and Near by Area. (Like Reject Hoppers, Mill Gear Box, Mill Motor Coupling etc).

Round the Clock Handling, Lifting and Shifting of Coal Mill Reject from

Mill Floor at ‘0’ Meter.

Below the Silo

Routine, Preventive & Breakdown Mechanical Maintenance of ID/FD/PA Fan and Its Associated System as per Scope of Work and Bill of Quantity.

Repairing of ID/FD/PA Fan

Arresting of Lube Oil Leakage (Inside Casing) of ID/FD/PA Fan

Maintenance of Lube Oil System (FD/ PA/ ID)

Maintenance of Mill Seal Air Fan / ID Fan Seal Air Fan

Overhauling of Mill Seal Air Fan/ ID Fan Seal Air Fans

De-Coupling, Coupling and Alignment of Mill Seal Air Fan / ID Fan Seal Air Fan

Routine Maintenance of ID/FD/PA Fans, ECW & APH System during General Shift per Day and Other Miscellaneous Work.

Preventive & Breakdown Mechanical Maintenance of ECW, APH and Its Associated System as per Scope of Work and Bill of Quantity.

Replacement/ Rectification and setting out Board/ Middle Board/ In Board Radial Seal and Circumferential (By Pass) Seals and Plates of Hot End & Cold End of Air Pre- Heater.

Repairing/ Replacement of Static Seal Plates by Fabrication, Cutting, Grinding, Welding of Hot End & Cold End of APH for Sector Plate.

Repairing/ Replacement of Rotor Post Seal of Hot End & Cold End of APH

Resetting/ Replacement of Axial Seal and Leveling of Axial Seal Plate by means of Adjusting Bolt in APH

Servicing of Lube Oil System of Guide/ Support Bearing of APH. One Job include One Lube Oil System.

Replacement of Guide Bearing

Replacement of Support Bearing

Replacement of Guide Trunion

Inspection & Housing Level Checking of Support Bearing or Guide Bearing of APH

Air Seal Housing Inspection and Replacement of Packing Rope of Guide or Support Bearing

Inspection of Gear Box, Drive Pinion & Pin Rack

Gear Boxes overhauling (RDU/SDU)

PM of Air Motor and Associated Valves/ Lines of APH

Servicing/ Replacement of Air Motor and Associated Valves/ Lines

Repair/ Cleaning or Replacement of APH Wash and Fire-Fighting Lines

Trial Run of Air Heater

Air Receiver Tanks Testing

Replacement of Main Drive Gear Box

Air Seal Assembly Repair

Rotor Inspection

Overhauling of APH Soot Blowers

Attending Defects of APH Soot Blowers

Servicing of APH Soot Blower

Flange Gasket Replacement of Pipe/ Valves

Replacement of Pumps

Replacement/ Servicing of Bearing of Pumps

Overhauling of Pumps

De-Coupling, Coupling and Alignment of ECW Pumps

Plate Heat Exchanger Inspection/ Replacement

Operation and general upkeep of Boiler Passenger/Goods (02no.) , Service Building (02 nos.), Administration Building (01nos.) & TG Building Passenger Elevator (01no.) & ESP (01no.) Elevator (M/s Techno Industries make) / Stack (Chimney) Elevator (01 no.) (M/s Alikraft Engineers Pvt. Ltd) for 1x660 MW, PTEP.

Round the clock operation and general upkeep of Boiler Passenger cum Goods Elevator & TG Building Passenger Elevator (M/s Techno Industries make) (8:00 Hrs. job basis)

Round the clock operation and general upkeep of Service Building Elevators & ESP Elevator (M/s Techno Industries make) (8:00 Hrs. job basis)

Operation and general upkeep of Administration Building Elevators (M/s Techno Industries make) from 8.00 hrs to 20.00 hrs. (12:00 Hrs. job basis)

Operation and general upkeep boiler goods Elevator (01 no.) (M/s techno industries) (8.00 hrs job basis).

Operation and general up keeping of Workshop Machines/Equipments for 1x660 MW, PTEP.

Operation and up keeping of Machine and Equipments (As Listed)

Housekeeping, Workshop Machines Cleaning and oiling and General cleaning of Workshop.

Routine and Preventive Maintenance of Mechanical systems of ESP, for 1x660 MW, PTEP.

Cleaning and sweeping of all railing of ESP top cover and cleaning of double geared motor emitting electrode rapping mechanism. (108 No.)

Cleaning and sweeping of platform between passes and cleaning of doubled geared motor of collecting electrode rapping mechanism.

Checking of oil level and attending oil leakage in all double geared motor of CERM, EERM, GDRM (per week).

Cleaning and sweeping of all stairs railing and platform from ‘o’ mtr. to top of ESP.(twice in a week)

Cleaning and sweeping of outside casing walls between passes.(once in two month)

Inspection and tightening of nut and bolts of CERM, EERM & GDRM if found in loose condition. (once in a week)

Cleaning of ash dust from ESP top roof of one pass, monthly per pass.

Breakdown Maintenance of Mechanical systems of ESP

Cleaning of complete structure, electrodes, shock bar, rapping mechanism, insulators & hoppers from inside of ESP of one field by wire brush, hard broom and old cloth/water washing.

Replacement of rapping hammer.

Replacement of plane bearing of rapping mechanism.

Repairing of rapping shaft.

Straightening of rapping shaft

Replacement of rapping shaft.

Repairing of bent collecting electrodes in ESP chamber in fix position.

Fixing of collecting electrodes with clamp/strip by bolting & welding.

Repair/Replacement of shock bar.

Replacement of shock pads

Repairing of shock bar guide (front/ rear) and shock bar guide attachment by welding or grinding wherever required.

Straightening of bent stay guide bar of collecting structure.

Removal of damaged emitting electrode and fixing the new emitting electrode.

Changing of damaged support Insulator.

Changing of damaged Shaft Insulator.

Alignment of disturbed emitting structure.

Repairing of support insulator screen pipe inside the ESP.

Replacement of asbestos rope of ESP shaft insulators cover.

Replacement of damaged motor gear box of rapping system.

Repairing of damaged rapping gear box.

Repairing of coupling of reduction gear box of collecting/emitting/GD rapping system.

Replacement of asbestos rope of ESP hopper manhole/Casing manhole/ Casing top manhole.

Repairing of manhole by replacing the damaged plate portion with new one.

Repairing of eroded portion by welding in ash hopper, ESP roof and other places inside and outside of the ESP chamber:

Repair/ fixing/welding of ash deflector plate

Repairing/ Re-fabrication of support of duct plate at ESP inlet

Repairing of bracings between ESP inlet gate and GD Screen and rear side of ESP by providing patch at eroded area or changing new piece by bracing pipe as per size.

Repairing /re-fixing of deflector plate on gas distribution screen.

Inspection and checking of ESP field and removal of minor defect.

Repairing of GD Screen.

Servicing of monorail.

Biennial Round the clock routine, preventive & breakdown mechanical maintenance and assisting in operation of RW Pump House, RW Intake PumpHouse , Clarifier Pump House , Pre-Treatment Plant , DM Plant,CPU,STP,NDCT, Effluent Treatment Plant , Hydrogen Plant , and Fire Finding System with Inner Gas System of 1X660 MW, PTEP,Panki, Kanpur.

Round the clock Routine & preventive maintenance and assisting in operation of RW Pump House, RW Intake Pump House , Clarifier Pump House , Pre-Treatment Plant , DM Plant,CPU,STP,NDCT, Effluent Treatment Plant , Hydrogen Plant , and Fire Finding System with Inner Gas System.

Breakdown mechanical maintenance of RW Pump House, RW Intake PumpHouse , Clarifier Pump House , Pre-Treatment Plant , DM Plant,CPU,STP,NDCT, Effluent Treatment Plant , Hydrogen Plant , and Fire Finding System with Inner Gas System.

Breakdown mechanical maintenance of RW Pump House, RW Intake PumpHouse , Clarifier Pump House , Pre-Treatment Plant , DM Plant ,CPU,STP, Effluent Treatment Plant and other associated work.

Servicing/repairing of Valves (gate/globe/NRV/butterfly/ diaphragm valves) (Dia< 100mm).

Servicing/repairing of Valves (gate/globe/NRV/butterfly/ diaphragm valves) ( Dia 100mm- 200mm).

Servicing/repairing of Valves (gate/globe/NRV/butterfly/ diaphragm valves) ( Dia >200mm).

Overhauling of Valves (gate/globe/ NRV/butterfly/ diaphragm valves) (Dia<100mm).

Overhauling of Valves (gate/globe/NRV/butterfly/ diaphragm valves ( Dia 100mm- 200mm).

Overhauling of Valves (gate/globe/NRV/butterfly/ diaphragm valves) ( Dia >200mm).

Replacement of Valves (gate/globe/ /butterfly / NRV/ diaphragm valves) (Dia< 100mm).

Replacement of Valves (gate/globe/ NRV / butterfly/ diaphragm valves ( Dia 100mm- 200mm).

Replacement of Valves (gate/globe/ NRV /butterfly/ diaphragm valves) ( Dia>200mm).

Overhauling of Horizontal Pump: - (DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make-Up, and Pumps associated with PT Plant, DM Plant, ETP Plant. ( Dia <100 mm).

Overhauling of Horizontal Pump: - (DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make-Up, and Pumps associated with PT Plant, DM Plant, ETP Plant.) ( Dia 100 mm- 200mm).

Overhauling of Horizontal Pump: - (DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make-Up, and Pumps associated with PT Plant, DM Plant, ETP Plant.) ( Dia >200mm)

Alignment of Horizontal Pumps(DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make Up, and Pumps associated with PT Plant, DM Plant, ETP Plant.) (Dia <100 mm).

Alignment of Horizontal Pumps(DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make Up, and Pumps associated with PT Plant, DM Plant, ETP Plant.) ( Dia 100 mm- 200mm).

Alignment of Horizontal Pumps(DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make Up, and Pumps associated with PT Plant, DM Plant, ETP Plant.) ( Dia > 200mm).

Servicing of Horizontal Pumps:- (DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make Up, and Pumps associated with PT Plant, DM Plant, ETP Plant.) (Dia < 100 mm)

Servicing of Horizontal Pumps:- (DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make Up, and Pumps associated with PT Plant, DM Plant, ETP Plant.) (Dia 100 mm-200 mm)

Servicing of Horizontal Pumps:- (DM Make Up, Backwash, Degassed water, Potable Water, CPU Regeneration, Emergency Hot Well Make Up, and Pumps associated with PT Plant, DM Plant, ETP Plant. (Dia >200 mm)

Overhauling of Agitators/Flocculators (of all chemical tanks and clarifiers).

Servicing of Agitators (of all chemical tanks and clarifiers).

Overhauling of Clarifloculator.

Overhauling of Blowers.

Bearing replacement of Blowers.

Belt replacement of Blowers.

Overhauling of Reciprocating pumps.

Servicing of Reciprocating pumps.

Servicing of NRV.

Servicing of Screw pump/Compressor.

Overhauling of Screw pump/Compressor.

Choking Removal of GI Pipes.

Servicing of Water Channel Gates.

Gland replacement of LP Water Pumps.

Attending Defects in Flanges.

Choking Removal of clarifloculator.

Servicing of Clarifloculator Drive.

Repair/Replacement of rail of Clarifloculator/ Electrical Hoist.

Repair/servicing of Clarifloculator Scrapers (Replacement of CCF scrapper structure of ETP & PT-CW Clarifloculator.)

Lifting of water Channel Gates.

Miscellaneous Welding Works.

Replacement of the Cartridge Filter Element of RO / UF Water System.

Inspection, Repair and Replacement of the RO/UF Membranes of RO Water System.

Attending Defects in HDPE pipes.

Laying of HDPE pipes.

Erection/laying of SS Lines.

Replacement of Pressure Vessels for RO/UF of RO Water System.

Replacement of Victaulic coupling/bushes, CPVC Valves & Fitting of RO /UF Water System.

Inspection of Pressure Vessels.

Servicing of V/V gear box .

Cleaning of Tanks ((RO, UF, DM WATER, FILTER WATER & CST WATER TANKS).

Overhauling of Vertical pumps (100 mm – 200 mm).

Overhauling of Vertical pumps (Dia 200 mm–300mm).

Overhauling of Vertical pumps (Dia >=300 mm).

Providing a diving team of 3 divers and one supervisor.

Replacement of seal of Butterfly Valves (>300mm).

Servicing of Butterfly Valves(>300mm).

EOT/Cranes (≤5MT) servicing:-

Cleaning of Pit/Sump.

Replacement of MS piping (100mm- 200mm).

Replacement of MSRL Pipes.

Attending Defects in Expansion Joints (of RW intake/ supply pump etc.)

Laying of ERW Pipes.

Bulk Chemicals (RESINS/Activated carbon/dual media/sand) Hndlg & Stacking.

Overhauling of vessel (Ion exchanger Like SAC/WAC, SBA/WBA, MB, CIP,CPU & CPU Regeneration Vessel /ACF /DMF & Other Vessels.)

Servicing of Air Blower.

Strainer Cleaning/choking removal.

Replacement/filling of Resin (ion exchangers/CPU and Nozzle Replacement work/Carbon replacement in ACF/Repairing work of CPU Vessel).

Servicing of diaphragm chamber/oil pressure relief valves (of alum/coagulant aid dosing pump/chemical dosing pump).

Attending gland leakage of various pumps and valves.

Maintenance of gear box of PT-CW/ETP Clarifier/Floculator.

Coupling Bush replacement and alignment in vertical pump.

Laying of MS pipe line.

Maintenance of Air Vent & A.R.V .

Cleaning of Trash Rack: (RW INTAKE/SUPPLY.P.H): 1set =complete trash rack installed for one no.of pump).

Cleaning of Travelling screen: (RW INTAKE)

PAINTING

Replacement/servicing/repairing of ejectors.

Rubber lining/re-rubber lining of tanks/valves/ pipings /Tee/Bends et.

Re rubber lining of Acid/Alkali/FeCl3/PE /Brine solution/ARU/ CRU/CMB/N.pit/RO/UF cleaning solution etc. dosing/ measuring Tanks with two layer of neoprene rubber each have thickness of 1.5 mm.

Re rubber lining of one stream of cation tank with three layer of neoprene rubber each have thickness of 1.5 mm.

Re rubber lining of one stream of Degasser tank with three layer of neoprene rubber each have thickness of 1.5 mm.

Re rubber lining of one stream of anion tank with three layer of neoprene rubber each have thickness of 1.5 mm.

Re rubber lining of one stream of mixed bed tank with three layer of neoprene rubber each have thickness of 2.5 mm.

Rubber lining/ re- rubber lining of pipe/ bends/ Tee including both side flanges etc. (including fabrication works for flanges joining) with new pipe having sizes from 25 NB to 250 NB. (Running Meter measured at center line of pipes used).

Protective coating of Epoxy paint including removal of old paint, rusted surface, preparation of surface by sand blasting, two coat of epoxy primer and two or more coat of epoxy paint on outer surface of Acid storage tanks / Alum Solution Preparation Tank (PAC storage Tank) / DM water stream tanks/structures of Acid / Alkali unloading rack / other vessels / pipes of various sizes / bends / tee’s / and other Misc. work.

Breakdown mechanical maintenance of RW/PW Chlorination system and other associated work.

Servicing of RW chlorinator

Servicing of RW evaporator

Replacement /servicing of RW/PW Remote Vacuum regulator

Replacement /servicing of RW/PW pressure relief valve

Replacement /servicing of RW /PW Flow meter -

Replacement /servicing of RW /PW Flow control valve-

Servicing of PW chlorinator.

Repairing /Servicing of RW Injector assembly with associated NRVs/valves -

Repairing /Servicing of PW Injector assembly with associated NRVs/valves -

Repairing /servicing of PW chlorine dispenser lines of one chlorinator with associated valves & filters -

Repairing /servicing of RW chlorine dispenser lines of one chlorinator with associated valves & filters :-

Repairing /Servicing of valves

Repair of MS pipeline work to arrest leakage-

Repair of HDPE pipeline for RW to arrest leakage of chlorine solution-

Repairing /servicing of RW parshall flume chlorine solution diffuser with associated valves-

Fabrication of lead gaskets ID 13mm, OD :20MM Thickness : 3mm (as per sample)-

Repairing /Servicing of emergency shower with associated pipe line & valve connected to source:-

Servicing of RW line strainers-

Breakdown mechanical maintenance of Natural drought cooling tower system of 1x660 MW, PTEP, Panki Kanpur.

CT Dist Pipe/Nozzles Cleaning

CT Fill Packs/Drift elemanator Cleaning

CT Basin Cleaning (Mechanical cleaning)

Replacement of rubber sealing Ring (Door Seal ) of B/F valve (2800NB)

Servicing of B/F valve 2800NB

Servicing of Centrifugal Vertical Pumps: Sludge disposal pump

Overhauling of Various Vertical Centrifugal Pumps: Sludge disposal pump

Servicing of Stop Log Gate

Breakdown Mechanical maintenance of fire fighting system including IGS of 1x660mw, PTEP, Panki Kanpur.

Maintenance of Hydrant Pump /Spray pump (motor/diesel engine driven).

Maintenance of Jockey Pump.

Maintenance / overhauling of Hydrant /Spray diesel engine

Maintenance / overhauling of Booster diesel engine

Maintenance / repairing of 250/200/150mm C.I. Isolating gate valves (fabricating , fixing & lapping of new brass seat rings in valve body & gate seat after removal of damaged ones, repair /replacement of wedge nut ,spindle, key , keyway ,gears, etc)

Maintenance / repairing of 100/80/65/40 mm C.I. Isolating gate valves (fabricating , fixing & lapping of new brass seat rings in valve body & gate seat after removal of damaged ones, repair /replacement of wedge nut ,spindle, key , keyway ,gears, etc)

Maintenance of 250/200 mm C.I. swing type Non Return Valve

Maintenance of 150/100 mm C.I. swing type Non Return Valve

Maintenance of 80/65 mm C.I. swing type Non Return Valve.

Overhauling(cleaning, repairing , replacement of damaged parts etc) of 150/100mm Y-type Strainer.

Overhauling(cleaning, repairing , replacement of damaged parts etc) of 250mm Basket-type Strainer.

Fabrication & fitting of flap seat of 250/200 mm swing type NRV.

Fabrication & fitting of flap seat of 150/100 mm swing type NRV.

Fabrication & fitting of flap seat of 80/65/40 mm swing type NRV.

Fabrication & fitting of complete hinge-lever of 250/200/150 mm swing type NRV.

Fabrication & fitting of complete hinge-lever of 100/80/65/40 mm swing type NRV.

Filling of gland packing in stuffing box of valves (250-200 mm).

Filling of gland packing in stuffing box of valves (150-50 mm).

Maintenance of Air release valve 25mm/40mm.

Maintenance / overhauling of 150 /100mm Deluge valve.

Maintenance / overhauling of 80 mm Deluge valve.

Maintenance/servicing of 150/100 mm butterfly valve.

Maintenance/servicing of 80 /65 mm butterfly valve.

Maintenance of 100 /80 mm C.I. Isolating Valve installed underground in the chamber.

Maintenance of250/ 200 /150 mm C.I. Isolating Valve installed underground in the chamber

Maintenance of Hydrant valve 63 mm inlet and 63 mm(monitor) outlet.

Maintenance of Foam Pump (Electric /Engine Driven).

Servicing of Diesel Engine of Hydrant/Spray/Booster/Foam pumps.

Maintenance of 80/100 mm Inline Balance Pressure Foam Proportioner).

Maintenance of Foam Maker.

Cleaning & servicing of basket type strainer 150 mm in Fixed Foam pourer pump house/system.

Maintenance of C.S./S.S. valves/check valve (40 mm - 150 mm) in Fixed Foam pourer pump house/system.

Maintenance of Y type Strainer 80/100 NB (S.S.) in Fixed Foam pourer pump house/system.

Maintenance of booster pump(Electric motor/Diesel Engine).

Maintenance/Servicing of complete Auto (Water) spray system in Generator Transformers/ Station Transformers/ Unit Auxiliary Transformers/ICT/UT/CHP Transformer.

Maintenance/Servicing of complete Auto (Water) spray system in Boiler Burner Fronts/Rear

Maintenance/Servicing of complete Auto (Water) spray system in Main Oil Tanks & Oil Purifier

Maintenance/Servicing of complete Auto (Water) spray system in Clean & Dirty Oil Tanks

Maintenance/Servicing of complete Auto (Water) spray system in FGD storage shed.

Maintenance/Servicing of complete Auto (Water) spray system as per scope of work in T- Boiler Feed Pumps and Oil Tank

Maintenance/Servicing of complete Auto (Water) spray system in Cable Spreader Room in Main Plant at EI.0.0m/8.5m/13m/27m/ ESP Room .

Maintenance/Servicing of complete Auto (Water) spray system in Seal oil pumps area.

Maintenance/Servicing of complete Auto (Water) spray system as per scope of work in Fuel Oil Pump House.

Maintenance/Servicing of complete Auto (Water) spray system in E.D.G .Set Building.

Maintenance/Servicing of complete Auto (Water) spray system in Coal Conveyors(section confined with one deluge valve will be treated as one job

Maintenance/Servicing of complete Auto (Water) spray system in Bowl mill area (system confined with one mill will be treated as one job).

Maintenance/Servicing of complete Auto (Water) spray system in APH area(system confined with one APH will be treated as one job).

Maintenance/Servicing of complete Auto (Water/Foam) spray system in LDO Storage Tanks

Leakage arresting work in underground pipe line at approx. 1.5 meter depth.

Leakage arresting work in water lines laid at ground level.

Leakage arresting work in water lines running overhead.

For arresting leakage in pipe lines laid above ground or inside of trenches by providing clamp.

Maintenance/overhauling of Inert Gas flooding system.

Servicing of Inert Gas flooding system.

Maintenance / repairing of250/ 200/150/100/80 mm C.I. Isolating gate valves (fabricating , fixing & lapping of new brass seat rings in valve body & gate seat after removal of damaged ones, repair /replacement of wedge nut ,spindle, key , keyway ,gears, etc)

Bienneal round the clock & routine collection and preparation of sample and analysis of water/steam/coal/oil/ash/waste water and Monitoring, Recording & maintaining Water Chemistry of 1X660 MW,PTEP, Panki, Kanpur.

Round the clock collection and preparation of sample and analysis of water/steam/coal/oil/ash/waste water and Monitoring, Recording & maintaining Water Chemistry of 1X660 MW,PTEP Panki Kanpur.

Routine collection and preparation of sample and analysis of water/steam/coal/oil/ash/waste water/flue gas/mill fineness/various components pertaining to pollution etc. and Monitoring, Recording & maintaining Water Chemistry ,calibration of instruments and Standardization of solutions for the special testing.

Round the clock Routine,Operation of CW/ACW Pumps , IAC/SAC/Air Driers, Complete CW Chorination Plant ,Complete CW Treatment Plant , Complete SSF Plant , FOPH System and LDO Unloading Pump House and its accessories and Round the clock Operation and Routine, Preventive, Breakdown maintenance & General cleaning work of HVAC (Heat Ventilation and Air Conditioning) system and Routine, Preventive &Breakdown maintenance of 1.5TR & 2.0 TR Split type Air conditioners& 2.0TR Cassette AC installed in 1x660MW, PTEP-, Panki” for the period of two years.

Round the clock Routine,Operation of CW/ACW Pumps , IAC/SAC/Air Driers, Complete CW Chorination Plant ,Complete CW Treatment Plant , Complete SSF Plant , FOPH System and LDO Unloading Pump House and its accessories.

Breakdown mechanical maintenance of complete CW/ACW Pumps and its Auxiliaries, IAC/SAC/Air Driers, EOT Cranes/Mono Rail Cranes, Complete CW Chorination Plant ,Complete CW Treatment Plant and Complete SSF Plant , FOPH System and LDO Unloading Pump House and its accessories.

Breakdown mechanical maintenance of of Complete CW Chlorination Plant, CW Treatment Plant & Side Stream Filtration Plant

Servicing of CW chlorinator

Servicing of CW evaporator

Replacement /servicing of CW Remote Vacuum regulator

Replacement /servicing of CW pressure relief valve

Replacement /servicing of CW Flow meter

Replacement /servicing of CW Flow control valve

Replacement /servicing of CW Differential pressure regulator

Servicing/cleaning of CW Cl2 absorption tower with suction duct network

Repairing /Servicing of CW Injector assembly with associated NRVs/valves

Repairing /Servicing of complete tonner manifold of CW with associated valves & expansion cylinders -

Repairing /servicing of CW chlorine dispenser lines of one chlorinator & evaporator with associated valves & filters

Replacement of coupling and Alignment of Booster pump

Replacement of coupling and Alignment of Recirculation pump

Servicing of caustic recirculation pump

Servicing of CW Booster pump

Overhauling of caustic recirculation Booster pump

Overhauling of CW Booster pump

Servicing of caustic Blowers

Overhauling of caustic Blowers

Bearing replacement of different pumps

Bearing replacement of Blower

Repairing /Servicing of valves sizes 0mm-50mm

Maintenance /Servicing of valves sizes>50 mm -100 mm

Maintenance /Servicing of valves sizes >100mm -200mm

Repairing /Servicing of PP diaphragm/check valves sizes -0mm- 80mm

Repairing/servicing of CPVC NRV/BALL valve 0mm -50 mm

Repairng/servicing of CPVC BF/Check Valve 100mm-150 mm

Repair of MS pipeline work to arrest leakage

Repair of HDPE pipeline for CW to arrest leakage of chlorine solution

Repairing /servicing of CW Forebay chlorine solution diffuser with associated valves

Replacement of CW chlorinator PVC vacuum pipeline with associated bends, tees, unions, flanges etc

Fabrication of lead gaskets ID 13mm, OD :20MM Thickness : 3mm (as per sample)

Refilling with maintenance /serving of oxygen cylinder and safety set

Repairing /Servicing of emergency shower with associated pipe line & valve connected to source

Servicing of CW line strainers

Attending B/d by re-rubber lining of different pipes, bend, pipes, Tee & Cross

Repairing /Servicing & revisioning of stroke adjustment of Acid dosing pump/scale inhibitor/corrosion inhibitor /biocide dosing pump

Complete cleaning & removal of foreign-material from scale inhibitor /corrosion inhibitor/biocide tanks, their strainer, backwashing of tank & Cleaning & flushing of pipe lines

Repairng/Servicing of agitator of scale inhibitor tank/corrosion tank/bio dispersant tank of dosing system

Repairing/Servicing of acid unloading pumps along with suction and discharge valve

Attending leakage in pipe lines

Repairing/servicing of PTFE NRV/ball/Diaphragm valve (0mm-50 mm)

Painting of Acid Storage Tank, Acid/Scale/ Corrosion inhibitor/ biocide measuring Tanks (Note : Paint and primer is in the contractor scope)

Overhauling of SSF Filter Back wash Pump

Servicing of SSF Filter Back wash Pump

Overhauling of SSF Air blower

Servicing of SSF Air blower

Replacement of Bearing of Filter Back wash Pump

Replacement of Bearing of Filter Back wash blowers

Replacement of coupling, Alignment & balancing of Back wash pumps

Cleaning /removal of mud/sludge from SSF Backwash Water Pit and its disposal

Miscellaneous repairing / welding work of MS Pipe lines

Replacement/ Top up of media (sand ) per m3

Inspection of Pressure Vessels

Cleaning of Pressure Vessels

Gland replacement of Water Pumps

Attending Defects in Flanges

Attending gland leakage of various pumps and valves.

Breakdown Mechanical maintenance of complete CW/ACW Pumps and its Auxiliaries, IAC/SAC/Air Driers, EOT Cranes/Mono Rail Cranes

Decoupling & coupling of motor and CW pump (while motor replacement)/motor removal and fitting of motor of CW pump

Alignment of motor and CW pump

Gland replacement and tightening of glands in stuffing box for arresting leakage in CW pump

Break down maintenance/Overhauling of CW pump

Decoupling & coupling of motor and ACW pump with adjustment of pump lift (while motor replacement)/motor removal and fitting of ACW motor

Alignment of motor and ACW pump

Gland replacement and tightening of glands in stuffing box for arresting leakage in ACW pump

Replacement of thrust bearing/spherical roller bearing

Break down maintenance/Overhauling of ACW pump

Cleaning of screen of CW PUMP

Cleaning of screen of ACW PUMP

Servicing/maintenance of Air release vent (ARV) /NRV/ Isolation valve and attend defect

Servicing/maintenance of Butterfly valve /Glove Valve

Replacement of Rubber sealing ring/gasket of Butterfly /Glove valve valve

Replacement of Expansion bellow

Cleaning of sump pit of CW/ACW Pump

Providing a Diving team of 03 Divers & 01 Supervisor 01 Helper for underwater diving services

Servicing & maintenance work of Service Air Compressor 03nos, Instrument Air Compressors 03nos & Air Driers 03 nos as per site requirement including assistance in A.M.C of above equipments of 1x660 MW, PTEP,Panki.

Servicing of monorail (FOPH) (make- M/s Mangla Hoist , 8 T capacity) & Unloading Pump House

CWPH EOT (60T/5on) , COMPRESSOR House EOT (8T) Crane, - Attend defect

General Cleaning of CW/ACW pump House, CW traetment Plant,SSF,CW clorination Plant and Compressor House

Inspection,Testing &Issue of required Statutory test certificate for CWPH EOT Crane (60/5 T).

Inspection, Testing & Issue of required Statutory test certificate for Compressor House EOT Crane (8 T) 01 no.,make: M/S Mangla Hoist

Inspection, Testing & Issue of required statutory test certificate for FOPH Mono Rail Cranes (8 MT capacity) 01 nos & Unloading Pump House

Routine, Preventive and Breakdown maintenance works, Cleaning works, Decantation of LDO from BTPN rakes & other associated maintenance works of Fuel oil system of 1x660MW PTPS-Extn. for the period of 02 year.

Routine & Preventive maintenance works of fuel oil System

Cleaning of LDO storage tank, Capacity-2000 KL. Completion time-12 days (8 hrs shift).

Cleaning of DOT, Capacity-10 m3. Completion time-02 day (8 hrs shift).

Daily cleaning of fuel oil pump house area, Work includes cleaning of all trenches, channel & open drains inside and outside of fuel oil pump house area.

Complete cleaning of LDO Unloading Header . Cleaning also includes Cutting of Vegetation around unloading header and shifting of cutted vegetation in scrap yard or as decided by JE/AE/EE concerns. Completion period-01month=02 jobs.

Cleaning of sump/Pit of FOPH. Completion period-2 day (8 hrs shift).

Break Down Maintenance works of fuel oil system:-.

Servicing of LDO Unloading screw pumps (Installed Qty-5 nos.)

Servicing of LDO pressurizing screw pumps including auxilliary Boiler with PCV (Installed Qty-2 nos.)

Servicing of Vertical Drain oil pump (Installed Qty-2 nos)

Servicing of Vertical Sump pump (Installed Qty-8 no)

Servicing of Gate Valve/Globe Valve/NRVs Size 20mm to 50mm.

Servicing of Gate Valve/Globe Valve/NRVs Size above 50 to 100mm.

Servicing of Gate Valve/Globe Valve/NRVs Size above 100-150mm.

Servicing of Gate Valve/Globe Valve/NRVs Size above 150-200mm

Servicing of Gate Valve/Globe Valve/NRVs Size above 200-450mm.

Replacement of Gate Valve/Globe Valve/NRVs Size 20mm to 50mm.

Replacement of Gate Valve/Globe Valve/NRVs Size above 50mm to 100mm

Replacement of Gate Valve/Globe Valve/NRVs Size above 100 to 150mm

Replacement of Gate Valve/Globe Valve/NRVs Size above 150-200mm

Replacement of Gate Valve/Globe Valve/NRVs to above 200 to450mm

Alignment of LDO pressurizing & unloading pumps.

Replacement of New/serviced LDO pumps.

Repairing/Replacement of PRV/PCV/ pressure release safety valve of LDO system (One PRV/PCV/PRS valve makes one number Job.)

Cleaning of Strainer of LDO pressurizing & unloading pumps

Decantation of LDO from BTPN rakes by making connection for unloading and making disconnection after unloading.

Decantation of LDO from Road Tankers by making connection for unloading and making disconnection after unloading.

Round the clock Operation and Routine, Preventive, Breakdown maintenance & General cleaning work of HVAC (Heat Ventilation and Air Conditioning) system and Routine, Preventive &Breakdown maintenance of 1.5TR & 2.0 TR Split type Air conditioners& 2.0TR Cassette AC installed in 1x660MW, PTEP-, Panki” for the period of two years.

Round the clock Operation and Routine, Preventive, Breakdown maintenance & general cleaning work of HVAC (Heat Ventilation and Air Conditioning) system of 1x660MW, PTEP- Panki for two years

Routine, Preventive & Breakdown maintenance of 1.5TR, 2.0TR Split type& 2.0TR Cassette Air conditioners installed in 1x660MW, PTEP-, Panki” for the period of two years

Routine servicing of 1.5TR (Qty-53 Nos), 2.0TR (Qty-71 Nos) Split type Air conditioners and 2.0 TR (Qty-03 Nos) Cassette Air Conditioner installed in 1X660MW, PTEP, Panki, Kanpur. (Approx.Total 131 Nos. Split AC)

Breakdown maintenance of damaged/defective spare parts of 1.5/ 2.0 TR Split type Air &and 2.0 TRCassette Air Conditioner installed at CPU regeneration Building,DM plant Control Room ,clarified water building, CWPH, Raw water Pump house , Raw water Intake ,fuel oil handling/ Unloading ,Training centre, Chemical Lab , fire station, Gate house , Dispensary , store building,, SO2 Analiser, Canteen Building etc. in BOP area of 1x660MW, PTEP, Panki, Kanpur

Replacement of 1.5 Ton burnt compressor with gas charging (R-32).

Replacement of 2.0 TR Split/ 2.0TR Cassette AC burnt compressor with gas charging (R-32).

Gas charging in 1.5 Ton Compressor (R- 32).

Gas charging in 2.0 TR Compressor of Split and Cassette Type AC (R-32).

Replacement of Strainer filter of 2.0 TR split type & Cassette Air conditioner

Replacement of Strainer filter of 1.5 Ton Split AC

Replacement of Starting capacitor/ running capacitor of 2.0 TR split type & Cassette Air conditioner capacitor of 2.0/3.0 Ton split type Air conditioner

Replacement of Starting capacitor/ running capacitor of 1.5 Ton split AC

Replacement of Thermostat of 2.0 TR split type & Cassette Air conditioner

Replacement of Thermostat of 1.5 Ton split type Air conditioner

Replacement of Blade of fan blower of 2.0TR split type & Cassette Air conditioner

Replacement of Blade of fan blower of 1.5 Ton split type Air conditioner

Replacement of Fan motor capacitor of 2.0 TR split type & Cassette Air conditioner/3.0Ton split type Air conditioner

Replacement of Fan motor capacitor of 1.5 Ton split type Air conditioner

Rewinding of outer blower motor of 1.5/2.0 TR split type & Cassette Air conditioner

Rewinding of inner blower motor of 1.5/2.0 TR split type & Cassette Air conditioner

Replacement of Starting relay of 2.0TR split type & Cassette Air conditioner

Replacement of Starting relay of 1.5 Ton split type Air conditioner

Repairing of PCB 1.5/2.0 TR split type & Cassette Air conditioner

Replacement of PCB 1.5/2.0 TR split type & Cassette Air conditioner

Repairing of Remote kit of 1.5/2.0TR split type & Cassette Air conditioner

Replacement of Remote kit of 1.5/2.0/ TR split type & Cassette Air conditioner

Top up of refrigerant of unit as per requirement (R-32).

Shifting of wall mounted complete Split AC of 1.5TR, 2.0TR Split Type & 2.0 TR Cassette Air Conditioner as per requirement of site, including supply of inlet/outlet copper piping with insulation, cutting, brazing & gas charging. Supply of inlet/outlet copper piping, insulation material, brazing & gas charging will be in the contractor scope.

Replacement of Condenser/Evaporator coil of 1.5 TR AC

Replacement of Condenser/Evaporator coil of 2.0 Ton Split AC

Replacement of Condenser/Evaporator coil of 2.0 Ton Cassette AC

Replacement of Fan Motor of 1.5 ton AC

Replacement of Fan Motor of 2.0 TR split type & Cassette Air conditioner

Engagement of Field Operation Assistant (Operator) in shift (Round the clock) for assistance in operational activities from Unit Control room (CCR) of 1X660 MW, PTEP - Panki, Kanpur

Engagement of Field Operation Assistant (Operator) in shift(Round the clock) for assistance in operational activities from Unit Control room(CCR) of 1X660 MW, PTEP, Panki Kanpur, {Each shift will be of 08 Hrs. and in 24 Hrs.(Day & Night) total 03 shifts will be carried-out and so in one year total shifts = 3X 365 = 1095 Shifts)}

BROTHERS ENGINEERING AND ERECTORS LIMITED (BID ID -4711501)

Bhavani Erectors Pvt Ltd (BID ID -4714500)

OPERATIONAL ENERGY GROUP INDIA LIMITED (BID ID -4747478)

TERMICO ENGINEERS & ERECTORS PRIVATE LIMITED (BID ID -4681733)