Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
1 Sept 2026, 10:30 amDue tomorrow
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
LP
2 conditions · 1 needing a document upload
OEM/Authorized dealer of OEM can participate in this tender. Bidder to quote with Tender specific authorization as per Railway Board Guidelines from OEM and the purchaser shall confirm the genuineness of OEM Authorization.
Tenderer with satisfactory past performance for the tendered item (with same/equivalent drawing/specification) within last 3 years for minimum 20 percent of the tendered quantity against a single order to any Zonal railway or railway Pus shall only be eligible for full/bulk order. Other sources may be considered for developmental order, provided the firm submits documentary proof in support of their credentials/satisfactory performance. For details, please follow the correction slip no.003 of SECR TENDER CONDITIONS 2019 of Goods & Services in IREPS website
25 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please follow the SECR GENERAL TENDER CONDITIONS 2019 of Goods & Services in IREPS website with latest correction slip.
Vendors payments will be made through online bills against Receipted Delivery Challan and/or Receipt notes generated through IMMS/UDM.
Procurement of furniture in SECR may be carried out from Godrej or equivalent firms that manufactures their products in India and offer warranty period equivalent to that of Godrej. The firms must possess all necessary certifications applicable to furniture manufacturing as per industry standards.
1 condition
It will be presumed that the firms who have submitted the e-bid have gone through and accepted all the terms and conditions of tender, until and unless firms specify the deviations from those conditions and so indicated specifically under the headings - "Technical Deviation Statement" and "Commercial Deviation Statements". If there is any contradiction between any techno commercial terms and conditions quoted in e-offer and documents attached along with the e-offer, the terms & conditions quoted in e-offer will prevail over that of quoted in attached documents. Tenderers in their own interest are advised not to quote any techno commercial terms & conditions in attached documents.
4 locations across Madhya Pradesh, Chhattisgarh · 26 Set total
LINEAR NON-SHARING WORKSTATION WITH TABLE TOP
11256561A~SECR
11256561A
Open - Indigenous
Goods
Madhya Pradesh
₹0
Exempted
17 Aug 2026
17 Aug 2026
4 items · 26 Set total
LINEAR NON-SHARING WORKSTATION WITH TABLE TOP HEIGHT OF 750 MM, LENGTH OF 1200 MM AND DEPTH OF 600 MM and Key board Tray of full standard size. Also the other minimum specifications are- 1) MAIN PARTITION: 60 MM THICK Slide-in Tile Based Partition of 1200mm Height with powder coating f inish. 2) WIRE MANAGEMENT: One Raceway at Skirting, Second Raceway Above or Below Table Top. 3) FINI SHES ABOVE TABLE TOP: Half Fabric Pin up Half Lam marker. 4) FINISHES BELOW TABLE TOP: 9 mm Thick. Prelaminated Prelaminated Particle panel. 5) TABLE TOP: 25 MM thk. Prelaminated Particle Board with 2m m PVC Edge band on all side. Table top at 750mm height from floor level. Cut-out provision for wire manger or Access flap as required. 6) GABLE END: 25 MM thick. Prelaminated Particle Board with machine pressed PVC Edge band on all side. 7) BRACKET: Corner & Cantilever bracket for worktable support finished in powd er coating. 8) PVC GROMMET PEDESTAL @400 L X 450 D X 670 HT : 2 Drawers & 1 Filling Drawer pedestal w ith leveller finish in 18 MM thick. Prelaminated Particle Board 2MM PVC Edge band to all Exposed Area & Me tal Drawer with Centralized Lock with handle. Reputed Make of- Godrej, SOS or similar. [ Warranty Period : 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCC/SDL, SECR | Madhya Pradesh | 2.00 Set |
| Total | 2 Set | |
LINEAR NON-SHARING WORKSTATION WITH TABLE TOP HEIGHT OF 750 MM, LENGTH OF 1200 MM AND DEPTH OF 600 MM and Key board Tray of full standard size. Also the other minimum specifications are- 1) MAIN PARTITION: 60 MM THICK Slide-in Tile Based Partition of 1200mm Height with powder coating f inish. 2) WIRE MANAGEMENT: One Raceway at Skirting, Second Raceway Above or Below Table Top. 3) FINI SHES ABOVE TABLE TOP: Half Fabric Pin up Half Lam marker. 4) FINISHES BELOW TABLE TOP: 9 mm Thick. Prelaminated Prelaminated Particle panel. 5) TABLE TOP: 25 MM thk. Prelaminated Particle Board with 2m m PVC Edge band on all side. Table top at 750mm height from floor level. Cut-out provision for wire manger or Access flap as required. 6) GABLE END: 25 MM thick. Prelaminated Particle Board with machine pressed PVC Edge band on all side. 7) BRACKET: Corner & Cantilever bracket for worktable support finished in powd er coating. 8) PVC GROMMET PEDESTAL @400 L X 450 D X 670 HT : 2 Drawers & 1 Filling Drawer pedestal w ith leveller finish in 18 MM thick. Prelaminated Particle Board 2MM PVC Edge band to all Exposed Area & Me tal Drawer with Centralized Lock with handle. Reputed Make of- Godrej, SOS or similar. [ Warranty Period : 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCC/KHS, SECR | Chhattisgarh | 8.00 Set |
| Total | 8 Set | |
LINEAR NON-SHARING WORKSTATION WITH TABLE TOP HEIGHT OF 750 MM, LENGTH OF 1200 MM AND DEPTH OF 600 MM and Key board Tray of full standard size. Also the other minimum specifications are- 1) MAIN PARTITION: 60 MM THICK Slide-in Tile Based Partition of 1200mm Height with powder coating f inish. 2) WIRE MANAGEMENT: One Raceway at Skirting, Second Raceway Above or Below Table Top. 3) FINI SHES ABOVE TABLE TOP: Half Fabric Pin up Half Lam marker. 4) FINISHES BELOW TABLE TOP: 9 mm Thick. Prelaminated Prelaminated Particle panel. 5) TABLE TOP: 25 MM thk. Prelaminated Particle Board with 2m m PVC Edge band on all side. Table top at 750mm height from floor level. Cut-out provision for wire manger or Access flap as required. 6) GABLE END: 25 MM thick. Prelaminated Particle Board with machine pressed PVC Edge band on all side. 7) BRACKET: Corner & Cantilever bracket for worktable support finished in powd er coating. 8) PVC GROMMET PEDESTAL @400 L X 450 D X 670 HT : 2 Drawers & 1 Filling Drawer pedestal w ith leveller finish in 18 MM thick. Prelaminated Particle Board 2MM PVC Edge band to all Exposed Area & Me tal Drawer with Centralized Lock with handle. Reputed Make of- Godrej, SOS or similar. [ Warranty Period : 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCC/KRBA, SECR | Chhattisgarh | 4.00 Set |
| Total | 4 Set | |
LINEAR NON-SHARING WORKSTATION WITH TABLE TOP HEIGHT OF 750 MM, LENGTH OF 1200 MM AND DEPTH OF 600 MM and Key board Tray of full standard size. Also the other minimum specifications are- 1) MAIN PARTITION: 60 MM THICK Slide-in Tile Based Partition of 1200mm Height with powder coating f inish. 2) WIRE MANAGEMENT: One Raceway at Skirting, Second Raceway Above or Below Table Top. 3) FINI SHES ABOVE TABLE TOP: Half Fabric Pin up Half Lam marker. 4) FINISHES BELOW TABLE TOP: 9 mm Thick. Prelaminated Prelaminated Particle panel. 5) TABLE TOP: 25 MM thk. Prelaminated Particle Board with 2m m PVC Edge band on all side. Table top at 750mm height from floor level. Cut-out provision for wire manger or Access flap as required. 6) GABLE END: 25 MM thick. Prelaminated Particle Board with machine pressed PVC Edge band on all side. 7) BRACKET: Corner & Cantilever bracket for worktable support finished in powd er coating. 8) PVC GROMMET PEDESTAL @400 L X 450 D X 670 HT : 2 Drawers & 1 Filling Drawer pedestal w ith leveller finish in 18 MM thick. Prelaminated Particle Board 2MM PVC Edge band to all Exposed Area & Me tal Drawer with Centralized Lock with handle. Reputed Make of- Godrej, SOS or similar. [ Warranty Period : 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CCC/BJRI, SECR | Chhattisgarh | 12.00 Set |
| Total | 12 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5436975.pdf
ATTACHMENT
5436821.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].