REPAIRS TO SANITARY FITTINGS TILING PLASTERING JOINERY PATH CHHAJJAS LEAKAGE SEEPAGE PERIODICAL SERVICES AND MISC B/R WORKS AT MH AND DENTAL WARD AT NDA KHADAKWASLA

Amount

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkhats or frame not exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down shutters n.exc 1 sqm each and removing complete all as specified and directed

Taking down shutters exe 1 sqm and n.exc 2 sqm each and removing complete all as specified and directed

M&L Solid PVC door frame of size 50x47mm ,made out of 5mm plain colour PVC sheet re inforced with MS square tube ,supplying and fixing in opening complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

S&F 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end) complete all as specified and directed

S&F 35mm thick Factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

M & L 35 mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F 30mm thick 2nd class hardwood skelten shutter glazed and skelton open rebated and prepared to receive glass with divided into squares with plain chamfered or rounded mitered and rebated sash bars any nubmers fitted with cut and mitered beads for securing glass size of members of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all as specified and directed

M&L for 25 mm thick Block boards, grade 2 quality, i n t e r i o r grade, decorative type with decorative face veneer on both faces complete all as specified and directed.

M&L Plain fillets not exc 3sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 100mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed.

S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 75mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 75mm long complete all as specified and directed.

S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M&L for preparation of new wooden surfaces and painting two coats of Synthetic Enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out wooden beads and incl supply & fixed wooden beads in the same position complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out wooden beads and incl supply & fixed wooden beads in the same position complete all as specified and directed

S&F Harrison rails 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F T type brackets decorative type powder coated suibable for 20 mm dia complete all as specified and directed.

S&F in repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and including re-fixing in position complete all as specified and directed.

S & F 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi- nium framework with screw as work in ceiling flat or sloping complete all as specified and directed.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling , the aluminium sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285. The snap grid consist of anodized aluminium main/ cross tee of size as indicated. Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer’s instruction. The main and cross tees shall be jointed at junction/ crossings with anodized aluminium angle bracket of size as indicated, if not indicated it shall be 15mm x l5mm x 1.5mm, weighing 0.12 Kg per running metre, fixed with sutiable mild steel, bolts nuts and washers, all as per manufacturer’s instructions. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size as indicated, if not indicated it shall be 40mm x 25 mm x 2mm, weighing 0.36 Kg per running meter Size of the snap grid shall be as indicated complete all as specified and directed.

M&L for complete removal of existing water proofing treatment of any decription and layers from wall, roof, chajja's,gabble walls, edges (at any height) etc incl any number of screed bed or bedding layer of mortar if any complete and cleaning the surface free from dust and mud ,scrubbing down with water complete all as specified , cleaning off the premises complete all as specified and directed.

Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of concrete in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed.

M&L for providing PCC (1:2:4) type B0 (using 12.5mm graded stone agg) as in roof kerbs and mud stope rounded or chamfered on edges complete all as specified and directed.

M&L for providing PCC (1:1½:3) type A0 (using 12.5mm graded stone agg) as in padding over roof & chajja (at any respective height of bldg) with using integral water proofing compound as per mfr's instructions complete all as specified and directed.

M&L for Type B1 1:2:4 (20 mm graded aggregate) in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, in gabble walls as directing complete all as specified and directed.

M&L Rendering 20mm thick in cement mortar 1:4 on concrete surfaces using integral water proofing compound as per mfr's instructions finished even and smooth without using extra cement (at any respective height of bldg ) complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for cutting grooves in brick / stone wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L For preparing plastered surfaces, with approved bituminous primer @100 gms/sqm and applying water proofing treatment on wall, roof, chajja's,gabble walls, edges (at any respective height of bldg )etc and stick with non-woven polyster matt modified APP Membrane 3mm thick as reinforcement weighing not less than 3.5 Kg/sqm and applying one coat of aluminium paint on top of the membrane (at any height) complete all as specified and directed.

M&L for preparation of old painted surfaces of wall by completely removing existing treatment by scrapping , cleaning , washing with water etc , and applying Two coats of oil bond distember including filing the surface with crack filler wherever required complete all as specified and directed. Note :- (i) The coulour scheme of the painting will be as decided by the accepting officer (ii) work tobe execute under occupation conditions.

M&L for preparation of old painted surfaces of ceiling by completely removing existing treatment by scrapping , cleaning , washing with water etc , and applying Two coats of oil bond distember including filing the surface with crack filler wherever required all as specified and directed . Note :- (i) work tobe execute under occupation conditions.

M&L for 2 to 3 mm thick wall care putty on wall complete all as specified and directed.

M&L for 2 to 3mm thick wall care putty on ceiling complete all as specified and directed.

M&L for Preparing old painted plastered / concrete surfaces of wall and applying one coat of synthetic enamel paint complete all as specified and directed

M&L preparing old painted wooden surfaces exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L preparing old painted steel surfaces exc.10cm width or girth and applying one coat of synthetic enamel paint , including grills, gate complete all as specified and directed .

M&L for preparation of old painted surfaces of wall , cleaning , washing with water etc , and applying one coat of exterior emulsion paint (Appex paint) , including filing the surface with crack filler wherever required all as specified and directed . Note (i) The coulour scheme of the painting will be as decided by the accepting officer (ii) work tobe execute under occupation conditions. (iii) Work to be execute in any respective ht of building

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,15mm dia pipes complete all as specified and directed.

Ditto all as per item No 57 above but 20mm dia pipes.

Refixing of old serviceable 15 mm bore of steel tubing pipe take out from item No 1 and conection in new or old position on wall, cieling, floor etc complete all as specified and directed.

Ditto all as per item No 59 above but 20mm dia pipes take out from item above

S&F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc. complete all as specified and directed.

Ditto all as per Item No 61 above but 20mm dia pipes.

Supplying and laying of CPVC pipes 16MM dia SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to wall , floor etc. including taking down old one complete all as specified and directed.

Supplying and laying of CPVC pipes 20MM dia SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to wall , floor etc. including taking down old one complete all as specified and directed.

Dismantling of existing water tanks Exc 250 not Exc 500 and removing to store

Ditto all as per item No 65 above but exc 500 Ltr n. Exc 1000 Ltr capacity.

S&F Rotational moulded polye- thylene water storage tanks (triple layered) 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F Rotational moulded polye- thylene water storage tanks (triple layered) 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 15mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/ 20mm-45gms /25mm- 65gms) including taking down old one complete all as specified and directed.

S&F in repair 20mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/ 20mm-45gms /25mm- 65gms) including taking down old one complete all as specified and directed.

S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.

Ditto all as per Item No 71 above here-in-before but 20mm dia

S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.

S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including taking down of old one complete all as specified and directed

S&F in repairs Bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-125gms) complete all as specified and directed.

S& F in repairs Stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.

S&F in repairs Pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110 gms) complete all as specified and directed.

S&F in repairs Brass CP mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs for Brass chromium plated shower rose 125mm size complete as directed and sample to be approved by Engr-in-charge complete all as specified and directed.

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity all as specified and directed including taking down old one complete all as specified and directed.

S&F in repairs for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including necessary cutting to floor tiles and connection to WC complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever castiron brackets, connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair Vitreous China wash basin, white, flat back, size 550 x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets , fixed in repairs complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm fixed in repairs complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 32mm bore dia pipe complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 40mm bore dia pipe complete all as specified and directed.

S&F in repairs towel rail 600 mm long of CP brass, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs Low density polyethylene (LDPE) pipes 40mm dia of pressure rating 6kgf/sq. cm complete all as specified and directed.

S&F in repairs doom grating 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs Grating doom 125/100 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.

S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws minimum size 160 x 160 x 90mm complete all as specified and directed.

M&L Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 50mm bore of pipes including taking down of old one complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted.

S&F in repairs Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted.

Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) type D2 using 40 mm graded aggregates as in sub base complete all as specified and directed.

M&L for light colour non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc, area of each tile exc 0.11 sqm and n. exc .18 sqm, set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 20 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.

M&L for Colored ,Glazed ceramic tiles in vertical wall surfaces 350 x 250 mm x 7mm / 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or color cement to match, laid over and incl provn of 10 mm thick plaster in CM (1:3), incl taking down plaster complete all as specified and directed.

M&L for joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and incl 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.

M&L Machine cut cuddapa stone slab 20 to 25mm thick over cement screed base ,laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M & L machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for Screed bed (or) bedding layer of mortar 20mm thick for laying floor finishes CM (1:6) complete all as specified and directed.

S & F glossy finish Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment complete all as specified and directed.

M&L for glossy finish machine pressed precast conctete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl 30mm thick sand chusioning complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) Cement concrete type B-1, 1:2:4 (20mm graded aggregate) type D2 using 40 mm graded aggregates & Finishing cement concrete surface even and smooth Without using extra cement complete all as specified and directed.

S&F in repair Water closet (Squatt pattern) vitreous China squatting pan, ‘Orissa’ pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to trap and squatting pan including P' trap set in and including concrete etc. complete all as specified and direted including making good to floor

S&F in repair wash down water closet (Pedestal pattern), white incl traps and all fittings complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L, 25 mm thick PCC 1:2:4 using 20 mm graded stone aggregate over 250 thick PCC 1:4:8 with 40mm graded stone aggregate as in filling of sunken floors over a layer of APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane over a layer of bitumen cutback (85/25) grade applied hot (1.5 Kg/sqm) over 10mm thick plaster in cm 1:3 with WPC @ 3% by wt. of cement complete all as specified & directed (Only plan area of sunken portion is measured) complete all as specified and directed.

Supply & fix in repairs, cast iron Nahani trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.

S & F in repairs CI Bends (any radius), diminishing pieces or tapers of 75 mm dia fitted with oval access door complete all as specified and directed.

M&l for injection grouting in concrete wall in lift wells using Dr Fixit Epoxy Injection Grout all as per manufactires instruction and specification complete all as specified and directed.

Dismantling of cast iron 100 mm bore pipes jointed in cement motar complete all as specified and directed.

Dismantling of cast iron 75 mm bore pipes jointed in cement motar complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F for 75mm bore dia PVC (SWR) bends with access door complete all as specified and directed.

S&F for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F for 110mm bore dia PVC (SWR) bends with access door complete all as specified and directed.

S&F for 110mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Excavation in trenches in Soft/Loose soil n. exe 1.5m wide & n. exe 1.5m depth for foundation etc n.exe 10sqm on plan and getting out in complete all as specified and directed.

Demolition and breaking up drain pipes ( SWG,AC or RCC pipes ) set in CM 150mm dia complete all as specified and directed.

M & L for providing bed to drain pipes 150mm dia in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate including packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed.

M & L for providing reinforced cement concrete pipes 150mm dia class NP 2 with collars laid and jointed with cement jointed complete all as specified and directed.

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm dia making good to pipe & rendering cutting out existing benching for forming branch channel (1/2 round or 3/4 section in cement concrete (1:2:4) type B-1, smooth finished complete all as specified and directed.

Returning filling in including spreading levelling, watering & well ramming in layers n. exe 25cm complete all as specified and directed.

Removing excavated material any type of Soil n. exe 50m and depositing where directed by Engg-in- charge at a level n. exe 1.50m above the starting point in complete all as specified and directed.

M & L for providing plain cement concrete 1:2:4 type B1 using 20mm grade agg. as in surfaces channels & drains complete all as specified and directed.

M & L for providing plain cement concrete 1:2:4 type B1 using 20mm grade agg. as in coping including weathering slightly, rounded or chamfered angles and throating and necessary use and waste of form work complete all as specified and directed.

Demolition of brick / block masonry / Stone masonry built in Cement mortar complete all as specified and directed.

M&L precast cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:6 complete in wall all as specified & directed

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling finished even and smooth without using extra cement at any height of bldg complete all as specified and directed.

M&L for Preparing new plastered surfaces of walls applying two coats of distemper oil bound complete all as specified and directed.

M&L Preparing new plastered surfaces of ceilling applying two coats of distemper oil bound complete all as specified and directed.

M&L for flush pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar 1:4 complete all as specified and directed.

M&L Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed.

M & L Cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75 mm thick as in plinth protection incl complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Pranjal Associates

Sayili Enterprises

AVS CONSTRUCTION

Sunil Constructions

DARSHAN ENTERPRISES

Mehta and Co.

OM GANESH CONSTRUCTION