Construction of additional school building at Vinobha Nagar primary school Ward No 64 East Tambaram Zone V in Tambaram Municipal Corporation

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Super structure 1st Floor

Super Structure 2nd Floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Columns

Plain Surface

Brick work in CM 1:5 mix using second class ground moulded chamber burnt bricks including cost and conveyance of all materials and including all labour charges etc complete

First Floor

Second Floor

Special ceiling Plastering in CM 1:3-10mm thick including cost and conveyance of all materials and including all labour Charges etc complete

Plastering in Cm 1;5-12mm thick including cost and conveyance of all materials and including all labour charges etc complete

Painting two coats using cement paint including cost and conveyance of all materials and including all labour charges etc complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supply and fixing of Door Frames using Country wood scantlings including cost and conveyance of all materials and including all labour charges etc complete

Supplying & fixing door shutters for Solid Core Flush Shutters with Teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to IS:12406/1989 with 35x12mm T.W. Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 No. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos and 1No. Door stopper etc complete.

Supply and fixing of MS Fabricated steel windows Including cost and conveyance of all materials and including fabrication charges conveyance charges and fixing in position etc complete window size 0.9x1.20M

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Painting Two coats using ready mix enamel paint for new wood workincluding cost and conveyance of all materials and including all labour charges etc complete

Painting Two coats using ready mix enamel paint for new Iron work including cost and conveyance of all materials and including all labour charges etc complete

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Wiring 2 x 1.50 sqmm (22/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100 V grade in suitable pvc rigid pipe consealed in wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylumw sheet cover with TW Switch box and 5 A FT switch with coninious earth wire connection for light point and Fan point as per SD 22

Supply and fixing of 5A/15 A3 pin combined flush type wall socket 1ith 5 A flush type switch on suitable TW box SD 136

Supply and fixing of single box type 4 feet 20 W LED Fitting with electronic choke and condensor with TW round blocks on wall or ceiling with fl.tube with PVC unsheathed copper leads etc as per 15B Annexure VII

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour SD 56

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL Sd 83

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp Sd 110

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) SD 506

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete Sd 133

Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps SD 135

Supply and laying of 3.5x25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good Sd 213

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry SD 211

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete Sd 200

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 2.0 TR Split Type AC Unit - 5 Star Rated including cost and conveyance of all materials etc complete

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay including cost and conveyance of all materials etc complete

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum 150mm

Supply and Delivery of DWC Structured Wall Polyethylene Piping Systems ( Pipe with online/ offline coupler and elasto meric sealing ring) with required specials non- mooth external annular corrugated and smooth internal surface (Double wall) (SN 8 Class) for non pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B.150mm

Refilling the excavator quantity including cost and conveyance of all materials etc complete.

Construction of inspection chamber of size 60 cm x 60 cm x 60 cm with 75mm thick RCC loose slabs covering in C.M. 1:2:4 mix including necessary reinforcement and earth work excavation for foundation wth 23 cm thick concrete bed using 40mm B.J. concrete in CC 1:4:10 for foundation brick work in CM 1:6 for chamber as directed during theexecution including plastering with CM 1:3, 12mm thick, benching and channelly etc. complete for 1 No

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Steel Bench : Manufacturing and Supply of Steel bench of Size 6’x1’x 1 ½’made out of 18 Gauge CR sheet with 6 No’s of Legs. The legs, top and bottom frames are made out of 11/4" Square pipe of 16 Gauge thickness. Extra bracing with 11/4" square pipe has to be welded in the width direction both at top and bottom frame. The bottom frame all-round has to be fixed at a height of 6" from the bottom tip of the leg. The stiffener should be given made of 18 gauge CR sheet below the bottom of the top sheet. The top CR Sheet to be fixed over the connection rod 16gauge 11/4" square rod which is fixed over leg with necessary tack welding. The square pipe bottom to be provided 1"rubber bush. All joints are ground smoothly and without burrs, Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials labours charges, painting, taxes, transportation loading unloading charges and other incidental charges etc., complete. Steel Desk: Manufacturing and Supply of Steel Desk Size of 6’X 1 ¼’ X 2½’made out of 18 Gauge CR sheet for top of the bench and bottom book keeping shelf with 6 No’s of Legs. The 6 No’s of legs, top and bottom frames are made out of 11/4" Square pipe of 16Gauge thickness. Extra bracing with 1" square pipe has to be welded in the width direction both at top and bottom frame. The bottom frame all-round has to be fixed at a height of 6" from the bottom tip the leg. The stiffener should be given made of 18 gauge CR sheet below the bottom of the top sheet. The top CR Sheet to be fixed over the connection rod 16 gauge 11/4" square rod which is fixed over leg with necessary tack welding. The square pipe bottom to be provided 1"rubber bush. All joints are ground smoothly and without burrs, Two coats of synthetic enamel paint over a coat of primer is given the cost inclusive of all materials labours charges, painting, taxes, transportation loading unloading charges and other incidental charges etc., complete. INCLUDING 18% GST.