Providing CAD facilities to Lift Irrigation Scheme Sain Jhandian under TubeWell Sub Division Nalagarh in Tehsil Nalagarh District Solan HP Sub Head Providing fixing 8 Nos field pre cast out let assembly with 80 mm CI Sluice valve and QC coupling etc

Amount

Excavation in foundation trenches upto all depths in all classification of earth work such as pick work,jumper work, saturated soil including bailing of pumping out water,blasting soft/hard rock where blasting is prohibited.In all lifts including trimming and dressing of sides,levelling of beds to correct grade i/c shoring,strutting,planking timbering and dewatering wherever required,stacking the usable and un-useable material / soil separately and after laying, jointing of pipes returning the useable soil in trenches in trenches in 15 cm (fifteen centimeters) layers including consolidating of each of each deposited layer by ramming and watering and disposing of all surplus excavated soil un useable materials as directed within all leads & lifts including restoration of un-metalled surfaces to its original condition and including cost of diverson for traffic night signals, fixing caution boards, crossing over trenches for excess to houses, fencing etc.complete in all respect with in all leads & lifts as per the direction of the Engineer-in-charge.

Excavation in drain and channels etc. earth work for pipes upto all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft/hard rock where blasting is probihited in all lifts including jungle clearence wherever required, trimming & dressing of sides, levelling of beds to correct grade including shoring/struting, planking , timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/ unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, right signals, fixing caution boards, crossing over trenches for acess to houses, fencing etc. complete in all respect with in all leads and lifts and as per direction of the Engineer-in-charge at site of work.

Providing,Laying, jointing and commissioning in treanches of HDPE (High Density Polyethylene pipes) of following diameter and class confirming to IS 4984-1995 with fusion welding process including all necessary fitting in all leads and lifts to the entire satisfaction of Engineer-in-charge. (Earth work in trenches to be measured and paid separately)

110 mm dia HDPE pipe PN 4.0 PE-80 IS 4984

110 mm dia HDPE pipe PN 4.0 PE-80 IS 4984

Providing and laying cement concrete by concrete mix using nominal concrete mix 'M-20 " with graded stone aggregate 20mm nominal size finishing and curing complete (excluding the cost of form work) for RCC work.as per direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts including carriage.

Providing and laying Precast slab in nominal cement concrete MIX of M25 and curing complete excluding cost of form work as per direction and to the entire satisfaction of the Engineer-in-charge .

Providing and laying cement concrete 1:4:8(Icement:4sand:8 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring,shuttering,struting and propping etc with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu,reinforced concrete and plain concrete and plain concrete work in :-

Vertical surfaces such as wall(Any thickness) partitions and the like i/c attached pillasters, buttresses,plinth and string courses and the like .

Boulders filling at bottom of 350 Φ Hydrant Chamber

Fittings and accessories

90 mm dia PN4 HDPE pipe

90 mm dia PN6 HDPE pipe end

90 dia PN6 HDPE 90 bends

90 dia PN6 HDPE QC pump connector

Placing tor steel reinforcement for RCC work i/c bending,binding and placing in possition complete.

Providing & fixing in position RCC pipe of following dia., class & length for outlets

RCC pipe of 900mm dia NP2.0

RCC pipe of 350mm dia NP2.0

Providing and Fixing C.I. 80 mm dia control/ sluice valve PN- 1 Kirloskar/Leader make as per direction and to the entire satisfaction of the Engineer-in-charge .

Steel work welded in built up sections,trusses & framed work including cutting, hoisting & fixing in position & applying a priming coatof red paint :- In grating, framed ,guards,bars, ladders,railing,brackets & similar works.work in all leads & lifts including carriage and as per direction and to the entire satisfaction of the Engineer-in-charge .

Miscellanious for locking arrangements & other accessories as per direction and to the entire satisfaction of the Engineer-in-charge .

SHANKAR LAL

AMERENDER SINGH

Jashwant Singh