ICAR-CIFA/Works/EFC/Borewell Genome_Ashoka/2025-26

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.All types of soil 350 mm dia. (Item code:23.1.1.2)

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia. (Item code:23.3.3)

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia. (item code:23.4.3)

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (Item code:23.5)

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. (Item code:23.7)

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge.(item code:23.12)

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia. (Item code:23.13.3)

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp. (Item code.23.14.3)

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia (Item code:23.15.3)

Providing and fixing 5HP submersible pump of approved brand (Crompton, Kirloskar, Havells etc.

Supplying and laying of PVC sheathed XLPE power cable 1.1 KV grade 3.5 core 35 mm2 armoured cable under ground including earth excavation,sand cushioning, protective cover and refiling of earth.

Providing and fixing electrical panel board of size 600mm x 600mm with 900mm height stand made up of 50 x 50 x 6mm angle with 63A 4 pole MCB, starter, indicator and painted with high gloss enamel paint.

Supplying and fixing 3 core 4 m2 submersible flat cable as per the instruction.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.50 mm nominal dia Pipes. (Item code:18.9.8)

Providing and fixing of 50mm dia UPVC Tee of reputed make ISI marked.

Providing and fixing of 50mm dia UPVC elbow of reputed make ISI marked.

Providing and fixing of 50mm dia UPVC control valve reputed ISI maked heavy duty.

Providing and fixing of 50mm dia UPVC socket of reputed make ISI marked.

Providing and fixing 50mm dia UPVC union of reputed make ISI marked.

Providing and fixing 50mm dia brass MTA of reputed make ISI marked.

Providing and fixing 50mm dia brass FTA of reputed make ISI marked.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes (Item Code : 18.9.3)

Providing and fixing 25mm dia UPVC valve of reputed make ISI marked.

Supplying and fixing PVC sheathed XLPE power cable 4 core 10 mm2 AC armowrd cable under ground including earth excavation, sand cushioning, protective cover and refilling of earth.

Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

Earthing with G.I. earth pipe 4.5 m long , 40 mm dia including G.I. wire accessories and providing marorary enclosure with cover plate having locking arrangement and watching pipe etc. with charcoal/coke and salt as required

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal dia Pipes. (item code: 18.9.6)

Providing and fixing 50mm uPVC tee of reputed make ISI marked.

Providing and fixing 50mm dia uPVC elbow of reputed make ISI marked.

Providing and fixing 50mm dia uPVC control valve of reputed make ISI marked.

Providing and fixng 50mm dia uPVC socket of reputed make ISI marked.

Providing and fixing 50mm dia uPVC union of reputed make ISI marked.

Providing and fixing 3HP (3 phase) open well submersible pumpt of approved brand (Crompton, Kirloskar, Havell etc.)

Providing and fixing electrical panel board of size : 600mm x 600mm with 900mm height stand make up of 50 x 50 x 6mm angle and GI sheet body cover with 3 phase starter, 63A 4 pole MCB, indicator etc. The panel box is to be painted with high gloss enamel paint as per the instruction.

Supplying and laying PVC sheathed XLPE power cable 1.1 KV grade 3.5 core 35mm2 armoured cable under ground including earth excavation, and cushing and refitting of earth all complete.

Supplying and fixing 3 core 4mm2 submersble flat cable as per the instruction.

Making of loddering arrangement with concrete post for installation of pump inside water upto a depth of 6.00m as per the instruction of the deptt.

Providing and fixing HDPE pipe of 40mm dia of reputed make including all fitting acessories all complete.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore. (item code:18.12.8)