PERIODICAL SERVICES IN ZONE-II AREA UNDER AGE B/R-I OF GE (NORTH) MEERUT CANTT

Amount

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 5mm thick cement plaster with cement mortar(1:4)on concrete surface as in ceiling finished even and smooth without using extra cement complete all as specified and directed

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fair, complete all as specified and directed.

M&L for preparation of new plastered of exterior/Interior wall/Ceiling of projection/chajja and applying 1 mm thick wall care putty to obtain smooth finishes complete all as specified and directed. Note:- (i) The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint the cost of all material. T&P and labour required for preparation of surface are deemed to be included in the rate quoted. Emulsion paint work shall to be paid under item No 15 and OBD work shall to be paid under item No 11 (ii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.

Preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint complete all as specified and directed.

Preparation of old painted Steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint complete all as specified and directed.

SMART PERIODICAL (INTERNAL SURFACE) M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and including cutting/ uprooting trees/ wild grass complete then washing the surface with Bleaching powder solution for treatment of fungal and applying 1 mm thick white cement base wall care putty to obtain smooth finishes complete all as specified and as directed at site by Engineer-in-Charge. Note:- (i) The old plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint the cost of all material. T&P and labour required for preparation of surface are deemed to be included in the rate quoted. OBD work shall to be paid under item No 09 & 10 (ii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.

M&L for 1 coat of primer applied @ 0.90 litre/ 10 sqm using spray machine complete all as specified and directed.

M&L for Two coat of OBD using spray machine complete all as specified and directed

M&L for one coat of OBD complete all as specified and directed

SMART PERIODICAL (EXTERNAL SURFACE) M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and including cutting/ uprooting trees/ wild grass complete then washing the surface with Bleaching powder solution for treatment of fungal and applying 1 mm thick white cement base wall care putty to obtain smooth finishes complete all as specified and as directed at site by Engineer-in-Charge & incl applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja. , of approved make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.

Note:- (i) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company bank guarantee for a minimum period of 04 years by the contractor. The authorised applicator of manufacture shall be got approved from GE before commencement of work. (ii) All the material to be incorporated on the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iii) After carrying out preparation of surface the same shall be got approved from GE before application of primer and paint for each building. (iv) The colour/shade will be all as approved by GE. (v) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed. The work shall be executed at a height from ground floor up to 15m (max). (vi) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer-in-Charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (vii) The application of acrylic paint/ weather coat shall be with fully automatic airless spray machine with a flow speed of min 1 litre per minutes having pressure of 3300 PSI by allowing 6 to 8 hrs to dry the surface before painting of subsequent coat. However, where it is not possible to apply acrylic paint by using the spray machine the work will be carried out manually by using roller.

M&L for two coat of acrylic smooth two or more coat applied @ 1.67 ltr/ 10 sqm over and including primer coat of exterior primer applied @ 2.20 kg / 10 Sqm using using spray machine for painting complete all as specified and directed.

M&L for one coat of acrylic smooth coat applied @ 1.67 ltr/ 10 sqm over using roller for painting complete all as specified and directed.

M&L for preparation of Old surfaces and apply two coat of cement base paint to walls complete all as specified and directed

Preparing old Plastered or unplastered surfaces of walls and applying two coat of white wash complete all as specified and directed

Dismantling of cast iron ,PVC or reinforced concrete drain pipes, 75/110/150/200 mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.complete all as specified and directed. Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)

M & L for repairing existing RCC structure work by gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position complete all as specified and directed

M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and complete all as specified and directed

S & F in repairs 20 mm bore PTMT ball valves, high pressure with polyethylene float and fly nuts complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S & F in repairs 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

S & F in repairs 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

S & F in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in repairs PVC lid covers for water tanks 500 ltr capacity including making neccesary fittings/fixtures arrangements for removal of old lid and fixing new one complete all as pecified and directed.

M & L for cleaning water tanks 500 ltrs capacity, cleaning and removing all scales and dirt etc from tanks and tank mouth of circulating pipe including disconnecting, setting side ( or lowering/ hoisting if required), reconnecting and replacing union/GI nipple etc if required complete all as specified and directed.

MAHTAB ALAM (BID ID -3439911)

S K CONSTRUCTION CO (BID ID -3444512)

S.P CONSTRUCTION CO. (BID ID -3445394)

M/S AVADH ENTERPRISES (BID ID -3440931)