REPAIR TO JOINERY, TILING, PLUMBING, PLASTERING, PERIODICAL AND MISC WORK AT MIL STN KASAULI

Amount

Schedule 'A' Section - I

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment set and jointed in neat cement slurry over 20 mm thick cement screed in CM 1:6 all as specified.all as specified and as directed.

M&L for Chequered cement concrete tiles 30 cmx 30cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 in floors with grey cement and pigments complete all as specified and directed

M&L Non skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc0.11sqm but not exc 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:4 complete all as specified.

M &L for Glazed ceramic coloured tiles 450X300X7mm thick,laid in vertical surfaces, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M & L for Non Skid ceramic coloured tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed 1:6 complete all as specified.

M & L for Non Skid ceramic coloured tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in wall skirting set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified directed by Engr-in-Charge

M& L for Virified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15 mm thick screed bed 1:6 complete all as specified.

Demolition of cement concrete (un- reinforced) in ground floor and paving n.exc. 15 cm thick below or above ground level complete all as specified .

M & L for 50 mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in sub base of floor complete all as specified and as directed

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified ,Including Taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M & L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ,Taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M & L for applying 1 mm thick wall care putty on walls etc complete all as specified

M&L for Preparation of newly plastered surfaces of walls and applying two coat of oil bound distempering over a coat of Chalk whitening etc complete all as specified.

M&L for Preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of Chalk whitening etc complete all as specified.

M&L for Preparation of Old plastered surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement base paint complete all as specified.

M&L for Preparation of Old plastered surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces of walls and applying two coat of cement base paint complete all as specified.

M&L for complete removal of existing treatment of walls and applying one coat of oil bound distempering complete all as specified.

M&L for complete removal of existing treatment of walls and applying two coat of oil bound distempering complete all as specified.

M & L including preparing of new previously untreated surface NTP/CGI/PGI or other steel roof of any type of treatment surfaces applying two coats of synthetic enamel roof paint complete all as specified.

M & L New roof sheets Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc complete all as specified and directed by Engr- in- Charge.

M&L preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment by washing, rubbing down and stopping of previously treated surfaces and applying two coat of exterior emulsion paint over a coat of primer of approved tint and make complete all as specified and directed.

All as per item No 22.00 above but one coat of exterior emulsion paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge.

Material & Labour for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by Engineer-in-Charge.

Supply and fixing Factory made plain, framed, panelled shutters, 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed by Engineer-in-Charge.

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed.

S & F factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge.

S&F factory made soild PVC moulded door shutter 28 to 30 mm thick (stiles) with 2.4 (or) 6 rails panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethen painted on the front face and 2 mm plain PVC sheet on back face with partical bpard core etc specified and directed by Engr-in-charge.

Mild Steel works as in bends straps, hold fasts etc, conforming to IS-206 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified.

Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.

Supply only sheet glass ordinary quality 3mm thick and glazing with oil puty or fixed with wdn beads in squares n.exc. 0.50 sqm in each pane complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Supply and fixing Mild steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified & directed.

S & F Mild steel butt hinges medium weight , cold rolled, 75mm, ISI marked, complete all as specified and directed .

Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 125 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

Supply and fixing 200 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

M&L preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer.

S&F Anodised aluminium frame for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat forfixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F sheet glass 5.5 mm thick tinted glass in square exc 0.5 sqm in each pain complete all as specified and directed by Engr-In- Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge.

Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

Dismantling timber scantling 40 sq.cm and over in section in any position in framed work etc complete all as specified.

S & F for 2nd class hard wood over 40 sqcm in Scantling clean sawn timber framed and fixed complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified.

S&F for 40mm thick 2nd class hardwood as in floors, planed one side, with butt joints and fixed with nails complete all as specified and directed by the Engineer-in-Charge

S&F in repair stop valve 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified.

S&F in repair 15 mm dia bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for iron pipe or for brass ferrule etc complete all as specified.

S&F in repairs Vitreous China wash hand basin white with pedastal flat back size 550x400 mm including brackets, complete all as specified

S&F in repair 15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified.

S&F in repair Vitreous china wash down water closet ,white (including fixing bolts & Seat cover) complete in all respect all as specified.

S&F10 ltr capacity PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including bracket fixed in repair

Supply and fixing 15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.

Vitreous china squatting pan, "Orissa pattern" of size 580 x 440 mm white with integral foot rests, cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, flushing cistern, flush pipe, PVC connection for water supply to flushing cistern etc complete fixed in repair.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 15mm bore.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 20 mm bore.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs.etc complete all as specified.

S&F in repair 100 mm dia PVC(SWR) 'P' trap including jointing with solvent cement etc complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, otching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for welded steel wire fabric weight n exc 4 kg per sqm fixed to steel or wood members complete all as specified.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into pikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165,complete all as specified.

S&F for mild steel in flat, round or square bar in available lengths conforming to Fe-410-W Gde E-250 complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer,complete all as specified.

Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site.

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.

Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site complete all as specified.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 Complete all as specified and as directed

All as per item No above but except stone complete all as specified and directed

M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed including demolition of brick masonary built in cement mortar including all quoins arches pillars commplete all as specified and directed.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified.

M/L for PCC 1:3:6 type C-1 using 20 mm graded stone agg as in coping to retaining walls/steps/parapet /base of railing post etc including necessary formwork and forming construction joint at 3.00m interval and expansion jpoint at 10 m interval etc complete all as specified.

S&F PVC pipes 110 mm bore as in weep holes complete all as specified.

M&L for Raised pointing in cement mortar 1:4 to brick or stone masonary wall complete all as specified.

M&L for boulder filling dry, hand packed tightly ,as in back filling of retaining wall.

S&F In repair wooden laminte 1286x194x8 mm size flooring AC4 standard 4 side V-groove fixed in floors complete all as specified and directed.

Amount of credit of Rs. 80222.60 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Sagar Builders

Pankaj Traders

Vishal Builder

Varindera And Varindera Construction

M/S CHOPRA & COMPANY

R B TRADERS