PROVN OF LT CABLE AND WATER SUPPLY AND ALLIED WORKS AT DABATHWA SECURITY POST NO 01 TO 07 UNDER GE (U) MEERUT CANTT

Amount

Excavation in trenches in soft/loose soil n.exc. 1.5M wide & n exc 1.5M deep for laying /taking out cable and GI/CI pipe line etc & getting out including forming bottom surface all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm layer in any type of soil complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed

S & F GI tubing, medium grade of size 80mm bore ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed.

S & F GI tubing, medium grade of size 50mm bore, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed.

S & F GI tubing, medium grade of size 20mm bore, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed.

S & F stop valve cast iron alloy, screw drawn, high pressure with crutch or butter fly handle , screwed both end for iron pipe or union and fixing pipe complete. of size 20 mm bore.

S & F stop valve cast iron alloy, screw drawn, high pressure with crutch or butter fly handle , screwed both end for iron pipe or union and fixing pipe complete. of size 50 mm bore.

Cutting of existing CI Pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. For following size :- Note :- Fittings will be measured and paid for separately under respective item

150mm dia bore

100mm dia bore

M & L for DI/CI Specials class B as per IS such as bends, tappers,any type branches cross all sockets and spigot collar caps and plug up to 150mm bore all as specified and as directed

M&L for construction of brick masonary valve pit of size 1000x1000x1000mm incl necessary excavation and earth work and disposal of surplus soil upto 50m, brick work in CM 1:6, 10mm plastering internally in cement mortor 1.4, PCC 1:2:4 100mm thick bottom and top wall as copling of valve pit, MS sheet 3mm thick cover double door fixed in angle iron frame 40mmX40mmX5mm at bottom for accomadating cover duly embaded in PCC coping with 25X3mm FI lugs 300mm long, one on each side, 12mm dia MS handle made to shape, locking arrangement incl two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surface complete all as specified and directed.

M & L for sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable) complete all as specified and directed. Note :- Punned thickness only will be considered for payment.

M&L for burnt clay fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Following sizes

50 sqmm x3.5 core

35 sqmm x3.5 core

16 sqmm x4 core

Supplying and fixing 40mm nominal bore Galvanised mild steel pipe /tubing, light grade for protection of earth lead / passing cable complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified (Excavation & Earth work shall be measured and paid separately)

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe medium grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:3:6 type C1 earth pit and Precast RCC cover 40 mm thick in plain cement concrete 1:2:4 type B1 duly reinforced with 8mm dia TMT bars @ 150mm c/c with 10mm dia MS round bar as in lifting handles, mild steel angle iron frame for pit cover made out of 40x40x5mm thick duly painted with two coats of ssynthetic enamel paint over a coat of priner , excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 03 of SSR Part I

Supply, fixing, installation and testing LT pannel out door (Kiosk type) type, wheather & vermin proof MS sheet housing 3.15mm thick, double door front & rear openable type mounted on 50 X 50 X 6mm angle iron frame, floor mounted type with coloured horizontal Tinned aluminium bus bar 4 pole mounted on insulators of rating 200 Amps, one MCCB, 4 pole 100 Amps, 25 KA 415 volts at incoming supply. The panel size not less than 600x500x400mm with 750mm long angle iron legs of size 50x50x6mm with cable gland, duly powder coated, locking arrengement complete and including grouting in PCC block of suitable size all as directed by Engr-in-Charge.

yameen enterprises

mohanlal gupta

M/S JPS Electrical Engineer & Contractor

NITHYA INFRATECH

janta tradrers

KUKREJA BROTHERS