Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC | L1 | Accepted-AOC ok | |
| 2 | L2₹3.9 L+₹20,609.11 (5.55%)Rejected-Finance | L2 | Rejected-Finance ok | |
| 3 | L3₹4.1 L+₹41,169 (11.1%)Rejected-Finance | L3 | Rejected-Finance ok | |
| 4 | L4₹4.2 L+₹46,345 (12.5%)Rejected-Finance | L4 | Rejected-Finance ok | |
| 5 | L5₹5.1 L+₹1.3 L (36.2%)Rejected-Finance PANCHAYATI RAJ ROHTAK | L5 | Rejected-Finance ok |
Tender Value
₹5.0 L
EMD Value
₹9,960
Closing Date
26 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vijay Dalal
EXECUTIVE ENGINEER PROV DIV NO 4 PWD B AND R PGIMS ROHTAK
A/R to 600 sft area Houses H no 97 to 162 of Revenue Officers Officials at Rohtak for the year 2023 24
2023_HRY_291702_1
PWD/P4/69
Open Tender
Civil Works
Works
365 days
Rohtak
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹9,960
Yes
6 Jul 2023
19 Jun 2023
26 Jun 2023
19 Jun 2023
26 Jun 2023
19 Jun 2023
Amount
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: (HSR 11.64) 11.64.1 - New work (two or more coats) over and including water thinnable priming coat with cement primer
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (HSR 30.28) 30.28.1 - One or more coats on old work
Finishing walls with Acrylic Smooth exterior paint of required shade: (HSR 30.37) 30.37.1 - Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface
Finishing walls with Acrylic Smooth exterior paint of required shade: (HSR 30.37) 30.37.2 - Old work (One or more coat applied @ 0.90 litre/10 sqm).
Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58)
Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (HSR 12.36) 12.36.1 - 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws
Providing and fixing ISi marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (HSR 12.65) 12.65.2 - 250x16 mm
Providing and fixing ISi marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (HSR 12.66) 12.66.3 - 150x10 mm
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 356 4, embossed on the body, door weight up to 35 kg and door width up to 7 00 mm), with necessary accessories and screws etc. complete. (HSR 12.88)
Providing and fixing ISi marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (HSR 12.69) 12.69.1 - 125 mm
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (HSR 30.54) 30.54.1 - Float glass panes of nominal thickness 4 mm (weight not less than 1O kg/sqm)
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR 10.58)
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete (HSR 10.57)
Providing and laying of conglomerate floor 50mm thick cement concrete topping 1 :2:4 (HSR 10.7)
15 mm cement plaster on the rough side of single or half brick wall of mix : (HSR 11.6) 11.6.1 - 1 :4 (1 cement: 4 fine sand)
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: (HSR 12.9) 12.9.3 - Ply wood 5 ply, 9 mm thick 12.9.3.1 - Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: (HSR 12.9) 12.9.5 - Particle Board 12 mm thick 12.9.5.2 - Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: (HSR 12.9) 12.9.8 - Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (HSR 22.85) Internal work - Exposed on wall 22.85.2 - 20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (HSR 22.85) Internal work - Exposed on wall 22.85.3 - 25 mm nominal outer dia Pipes
The Hardik Co-op L AND C Society Ltd
THE BASANT VIHAR CO-OP L & C SOCIETY LTD
THE ROHIT COOPERATIVE MULTIPURPOSE SOCIETY
THE DADA ULHALLA CO OP L AND C SOCIETY LTD.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .