WBPWD/SKHSD-I/AE/eNIT-13 OF 2025-2026

Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 7S m as directed.

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (ground floor). {Excluding cost of chipping over concrete surface). (i) with 1:6 cement mortar. (b) 20 mm. thick plaster.

(c)15 mm. thick plaster.

(ii) with 1:4 cement mortar. (c)10 mm. thick plaster.

Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.

Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer’s specification )incIuding cleaning and smoothning of surface.Two Coats

Dismantling all type of masonry excepting cement concrete plain of reinforced stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.. (a) Tn ground floor including root.

Brick work with 1st class bricks in cement mortar (1:6) In Super structure, ground floor.

Taking out carefully Ranigunge pattern tiles from roof stacking seviceable tiles at site and removing rubbish as directed with in a lead of 75m.(Payment to be made on the measurement of portion of roof removed)

Supplying, fitting & fixing Zn-AI alloy (5S% AI & 45% Zn) coating of 150grams per sq. metre (followed by colour coated on both side) steel sheetwork having minimum yield strength of 550 Mpa of trapizoidal profile ofapproved make as per IS: 15965: 2012 and IS: 14246: 2013 (excludingthe supporting frame work) fitted and fixed with 55 mm & 25 mm selftapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc.complete with 150 mm end lap and one corrugation minimum side lap.