8829 SPECIAL REPAIRS TO PANEL, DB, MCB, SUBMAIN WIRING, AND ASSOCIATED ELECTRICAL WORKS IN CH COMPLEX AT 4 RMC AND PROVISION OF CERTAIN LOW BUDGETED WORKS, REVENUE WORKS AND MINOR WORKS IN THE AREA OF AGE EM UNDER GE SOUTH PUNE

Amount

Taking down carefully all type of main switches, board pannel, consistion of DB of any pole / make including switch fuse unit/ MCBs etc from the building complete all as specified and directed.

Taking down carefully unserviceable Sub main wiring of any size and type including making good the disturbed surfaces of walls, ceilings etc complete all as directed by Engineer - in - Charge.

Material and labour for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, one single core, PVC insulated, copper conductor cable Make:- Havelles / Polycab / Finoles drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:-One meter of conduit along with 2x6 sq mm wire and 1 x 4 sqmm earth shall be measured as one unit length.

M&L Sheet metal enclosure for DB's with IP 43- IK 09 protection 100 Amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties & circuit identification labels 240 volt SPN 8 way, with Metal door. Make- L&T / Legrand / HPL (O safe )

S&F IP-43, protection metal door Vertical TPN -DB rated busbar, pan assembly etc. with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules with provision to mount 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Make- L&T (DBVTL004DD ) or Equivalent in Legrand / HPL (O safe )

S&F MCCB 4 pole 100 Amp, Icu = 18 KA, 415 volts, 50 Hz, type with thermal magnetic release duly connected with copper spreader links 04 Nos and proper size of lugs, nuts bolts and washers for proper connections all as specified and directed. [Make : L&T or of equivalent make in Legrand / HPL (O safe )]

Supply & fixing MCB DP, AC, 240 volts of 32 Amps, 2 modules, C curve, 10 kA, confirms to IS/IEC 60898 -1:2002 and making connections complete all as specified & directed. [Make :- L&T / Legrand / HPL (O safe )]

Supply and fixing MCB SP, AC, 240 volts of 06 to 32 Amps, 1 module, C curve, 10 kA, confirms to IS/IEC 60898 -1:2002 and making connections complete all as specified & directed. [Make :- L&T or Equivalent in Legrand / HPL (O safe )]

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed. Note:-After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt.

Taking down old unserviceable / worn out aluminium under ground cable of any type and size

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 m in depth for foundation and getting out in following :-

Soft /Loose Soil

Hard/Dense soil

Soft disintegrated rock

Returning filling in incluiding spreading levelling watering and well ramming in layers in layers of rock n.exc 25 cm complete all as specified and as directed.

Returning filling in incluiding spreading levelling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point of soil complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point of rock complete all as specified and as directed.

M&L for laying of Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 150mm, 2 nos half round ( for bottom and top )and before laying exacaved area shall be leveling all as specified and directed Engr-in-charge.

M&L for laying of Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 80mm, 2 nos half round ( for bottom and top) and before laying exacaved area shall be leveling all as specified and directed Engr-in-charge.

M&L for laying of Reinforced concrete pipes, class NP2 with one collar per lengh of pipe of dia 150mm, full round and before laying exacaved area shall be leveling all as specified and directed Engr-in-charge.

S&F GI tubing 40 mm dia Light grade for cable protection laid in wall /floor / pole with MS clamp , bolt nuts including taking down complete all as specified and directed .

S&F PVC PIPE 50 mm dia 10 Kg/ cm2 with bends and fittings concealed in walls for cable protection laid in wall /floor with MS clamp including taking down any type existing pipe, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc complete all as specified and directed .

Supply and lay or fixing or passing through pipe, Testing & commissioning cable PVC cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core.

Taking down carefully all types of point wiring ( light, point ) complete with fittings such as switches, ceiling rose, light fittings etc and making good to disturbed surfaces of wall, floor etc complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- FLEXIBLE WIRING CABLE conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable Make:- Havells/Polycab/Finolex in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick laminated hylem sheet top cover concealed in wall with and including continuous earth wire of size 1.0 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

One light point wiring controlled by one, one way switch.

One light point controlled by two, 2 way switches 05 / 06 Amps.

M&L for switch piano flush type, 5/6 Amps two way complete all as specified. and directed

M&L for switch piano flush type, 5/6 Amps single pole one way complete all as specified. and directed

Supply and fix LED tube light fitting surface / pendent mounting decorative box type AC220-240V, 50Hz aluminium body 2ft long - 10 Watts complete all as specified and as directed. [Make : HPL (Neptune Plus) or of equivalent make in Wipro / Bajaj / Syska]

Supply & fixing of ceiling rose surface Bakelite ISI marked three equal size terminals fixed on anodised 100x100mm pressed steel box flush to the wall with 3 mm thick Bakelite cover complete all as specified & directed.

Supply and fixing 30 Watt LED street light luminaries in a single pc , deep drawn aluminium housing anodised inside and acrylic cover complete with 30 Watt in built control gear including up to 2.5 mtr twin core aluminium conductor for connection of street light fitting from LT OH line/ceiling rose and street light bracket made out of 25 mm dia GI pipe light grade,0.90 mtr long bend to shape 130 degree angle fixed to pole/wall/ceiling by two nos MS clamp made out of flat iron size 40 x 5 mm with nut bolts and washer complete all as directed by Engr in Charge. [Make : Wipro (Sky line) or of equivalent Make in Bajaj / HPL]

M & L for Brick work with subclass 'B' old size bricks, (clay burnt bricks) straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for cutting the road making good as existed for laying cable and making good all as specified and directed

Removing the interlocking tiles and re laying as existed for laying cables and making good all as specified and directed

M & L for meter Box suitable for post paid AMR meter made out 2 mm thick CRCA sheet with heavy duty SS hinges un removable type with door and locking arrangement and with Godrej pad lock with suitable visible glass for taking meter reading and with earthing stud -1 nos and provision for in/out cable and duly powder coated after 7 tank process suitable for for fixing single smart postpaid Meter any size concealed/flush to wall complete including fixing the electric meter after dismantling from the existing pannel suitable way for easy removal for repair and making good disturbed area as existed all as specified and directed.

S&F BE (Boom Barrier) automatic boom barrier time 6 to 7 sec, use in cycle 80% intensive use motor with gear & control box, manual release key, wireless remote upto 6 meter boom (telescopic type) with boom rest including with battery backup for one operation up and down fastener bolts, base clamp and photocell sensor including necessary PCC required as per manufacturer's specification complete all as specified and directed by Engrs-in-charge. [Make : Livfuture Automation & Security Pvt Ltd / Gandhi Automation Pvt Ltd / Auto Boom Barrier]

Supply, lay, test connecting and commissioning underground cable LT 1100 volt grade heavy duty XLPE insulated armoured with aluminum stranded conductor complete laid in trenches/fixed to poles /drawn through pipes with suitable size cable glands crimping type cable lugs etc all as specified and directed of size 6 Sqmm 2 Core, including taking down old unserviceable cable complete all as specified and as directed by Engr-in-Charge.

Design, fabricate, supply, installing, testing and commissioning of LT panel board outdoor type cubical/modular/compartmentised construction double door, with bus bar chamber, IP 54 and all as per IE rules, prewired, and fabricated out of 2.00 mm thick CRCA sheet double door with aprons, dust, vermin, weather proof duly powder coated after 7 tank process mounted on suitable size MS iron angle frame 50 x 50 x 6 mm welded in shape including necessary grouting in PCC 1:3:6 type C-1 with 20 mm grade stone aggregate completed with legs 30 cm in ground in PCC and 40 cm above ground, including connecting to cable with cable glands, lugs etc. and consisting of the following:- (a) Aluminium bus bar 100 Amps - 02 Nos one for phases and - 01 No for neutral duly colour sleeved mounted on epoxy insulator - 01 set (b) Incoming MCB SPN 63 Amps 10 KA, 240 V - 01 No (c) Outgoing MCB 32 Amp SP 10 KA, 240 V - 01No

Supply and fixing Integral LED Street Light Luminaire 60W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50 mm GI Pipe complete with accessories conforming to Cat Part No : ENDURAPEARLPLUSS60WLED757SASYTOPC of 'Havells' or of equivalent in Wipro/Phillips all as specified here-in-after.

M&L for steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts nuts & screws as specified type 410 SP-22(9.00 mtr long) complete all as specified and as directed.

Supply and fix FRP junction box light weight suitable for pole mounting including MCB SP 6 Amps single pole and necessary connector for loop in loop out cable connection and suitable size glands of size 250 x 200 x 100mm complete all as specified and as directed. (Make: Sintex or of equivalent make.)

Supply, lay, test connecting and commissioning underground cable LT 1100 volt grade heavy duty XLPE insulated armoured with aluminum stranded conductor complete laid in trenches/fixed to poles /drawn through pipes with suitable size cable glands crimping type cable lugs etc of size 10 Sqmm 2 core,including taking down old unserviceable cable complete all as specified and directed.

M&L bracket made of GI pipe 40 mm dia light grade bend to shape not less than 1.5 mtr with 02 Nos of MS clamps fabricated out of MS flat of size 25x4mm including nut, bolts, washers etc complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone agg as in coping on top of wall and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

Supply and install Hi Wall split units indoor/outdoor complete with cordless remote control unit and with built in air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2.of capacity 2TR complete all as specified and as directed. [Make :- Blustar / Voltas / Daikin]

S&F fabricated/ factory made angle iron stand suitable for fixing/mounting to outdoor unit of split AC, including grouting nut bolts, etc. complete all as specified and as directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20/32Amp, 240 V complete all as specified and as directed.

M & L for copper tubing, confirming to relevant IS, of size 5/8 & 3/8" flare size or nearest size, 3 core 2.5sqmm copper cable, PVC drain pipe and insulation with superlon insulation to copper tubing as required length from indoor to outdoor unit of split AC complete as directed by Engineer in charge.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge [Note :- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) runs of 4 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.]

S & F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input between 170V to 250V with output voltage stabilized at 230V with accuracy of ± 2.5 and capacity 5KVA complete all as specified and as directed. (Make : V Guard / Bluestar)

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed by Engineer in Charge

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked Make - Havells / Polycab / Finolex in and including heavy duty,PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls / floors / ceiling including cutting / chases etc and making good as existed including two coats of white / colours washing / distempering etc to the disturbed surfaces complete incl. all conduit accessories/fittings/junction boxes/inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls,including laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets,etc,including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete all as specified for One light / fan/ point controlled by one switch.

Supplying and fixing LED Integraded Batten T5 tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver, glare free, smooth light distribution conforming to CAT Part No. Neptune Plus 20 Watts of HPL or of equivalent in Wipro / Bajaj / Philips including taking down old unserviceable fitting complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 25 mm bore complete all as specified and as directed.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 20 mm bore complete all as specified and as directed.

Supply and fix complete to walls / ceilings or laid in floors steel water tubing galvanised medium grade with all fittings of sizes 25 mm size complete all as specified and as directed.

Supply and fix complete to walls / ceilings or laid in floors steel water tubing galvanised medium grade with all fittings of sizes 20 mm size complete all as specified and as directed.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 25 mm bore complete all as specified & directed by Engr-in-Charge.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of size 50 mm bore complete all as specified & directed by Engr-in-Charge.

S&F gun metel, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the sizes of 25 mm bore with ISI marked and as per IS-14846 all as specified and directed by the Engineer-in-Charge.

S&F gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the sizes of 50 mm bore with ISI marked and as per IS-14846 all as specified and directed by the Engineer-in-Charge.

S & F stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of size 25 mm bore complete all as specified.

S & F stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of size 50 mm bore complete all as specified.

M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in foundation concrete, mass concrete etc. complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms /25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed.

Supply, install, test and commissioning self priming centrifugal pump set mounted on base frame of C- Channel of size 100x100x50 mm, electric driven, 1 phase, 50 cycles, 240 volts, 1.5 HP with discharge of 180/200 LPM at a head of 24 metres, directly coupled including brass impeller,suitable size, suction pipe and discharge pipe, connection from existing GI line to pump delivery to main header coupling guard, pressure guage at delivery side, air release valve and all accessories as recommnded by manufacturer, PCC foundation,rubber pads, covering of pump-motor with GI sheets complete all specified and directed. (Make: Kirlosker/CromptonGreaves)

Supply and fix in replacement rotational moulded polyethylene water storage tanks (vertical cylindrcal with closed top) hoisted and fixed in position in SSR Part-I, double layered with ISI marked with existing inlet, outlets & provision of washouts (vent pipe all as directed of capacity) 5000 litr complete all as specified and as directed. [Make : Sintex / Ashish / Polycon or of equivalent make specified here in after]

S & F, single phase DOL starter in Sheet-Steel Enclosure suitable for 1.5 HP monoblock pump set of Make L&T or equivalent of Schneider/C&S/Havells complete all as specified and as directed.

Supply ,installing, testing and commissioning ,sheet metal cubicle board out door type, hood on top, weather, vermin proof, platform mounted, suitable for mounting single phase monoblock pump set - 01 No. and DOL starter for Pump - 1 No. & SPN MCB 63 Amp complete with all electrical connections, steel sheet enclosure made of 2mm CRCA mild steel with 40x40x6mm angle iron frame, angle iron support of 40x40x6mm with 0.6m above ground level and 0.4m grouted in ground / PCC floor with necessary earthwork excavation hinged doors, front & rear opening and locking arrangement (including provision of 65mm Godrej (freedom) lock with 2 keys)and duly powder coated after 7 tank process on the outside and inside including provision of PCC platform 100mm thick with PCC 1:4:8 type D-2 using 40 mm graded aggregate one metre around the panel board, cable gland and lugs for incoming and outgoing cable, complete all as specified and directed here-in-after.

M & L for point wiring complete with and including single core, PVC, FRLS insulated unsheathed, flexible, bright annealed, multi stranded copper conductor cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls / floors / ceiling including cutting / chases etc and making good to wall etc including two coats of white wash / colour wash distempering etc to disturbed surfaces to match existing surface incl. all conduit accessories / fittings / junction boxes / inspection covers etc; of heavy grade, with GI sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches of Make- Legrand (Myrius) or equivalent Honey well / Philips including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light / fan / point controlled by one switch complete all as specified and directed.

S&F Modular white cover plate with frame, 1 Module complete all as specified and as directed.

S&F Modular metal flush box 1/2 module complete all as specified and as directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S&F Industrial movable air cooler at site, AC single phase 240V PVC body of size 110 m3 3900 ft 70 ltr water capacity etc all as specified and directed by engineer in charge conforming to Cat part No SIESTA 70 XL of Symphony or of equivalent Make in Havells / Crompton / Usha

M&L for conducting survey to access the feasibility of under ground water source at 4 places complete all as specified and as directed.

M & L for fixing of MS reducer, ball plug, well cap, MS srip for centering, MS iron clamps, electric logging and sample strata box for bore well having casing pipe for pump as 200 mm dia complete all as specified and as directed.

M&L for drilling Trial bore of 150 mm dia upto 300 Mtr depth below ground level in any kind of soil strata including hard stone/ boulder including electric logging, MS Cap, MS flat iron clamps, redicing socket etc. all as specified and directed by Engr-in-Charge.

M & L for development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water.

M & L for yield test for borewell by continuously pumping of water for 16 hrs to determine safe pumping yield complete all as specified and as directed.

Supply, installation, testing and commissioning submersible pump 3 HP, 415V, 50 Hz, 3 Phase of 130 Mtr head min and discharge ISI marked all as directed by Engr-In-Charge. [Make : Kirloskar / Crompton / KSB]

Supply and lowering in borewell HDPE pipe 50 mm dia of pressure rating 6 kgf/cm2 complete all as specified and as directed.

S&F GI pipe medium grade 50 mm dia bore with GI bend, elbow, union, nipple etc for connected to HDPE borewell pipe or laying in trenches with complete all specified and directed.

S&F LT 1100 V grade water proof flat cable suitable for submersible pump of siz 2.5 sq mm 3 core including water proof joint etc complete all as specified and as directed.

Supply and lay LT UG cable XLPE insulated stranded aluminium conductor 4 core x 10 Sqmm, PVC insulated, sheathed, armoured 1100 Volts Grade, laid in trenches complete all as specified and as directed.

Testing of water samples of the borewell for its Bacteriological and Chemical Analysis from State Govt Laboratory

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light/fan/ point controlled by one switch and regulator.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board.

One 3 pin 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded cable 1100 volts grade, ISI - 694 FRLS cable marked in and including heavy duty,PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

M & L for Sub main wiring complete with four single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge (Note :- 2 runs of 4 Sqmm conductor and one run of 2.5 Sqmm earth wire shall be measured as one unit length.)

S&F bell push, flush type, 5 amp complete all as specified and as directed.

S&F bell electrical ding dong including hard\wood board bell push, flush type, 5 amp complete all as specified and as directed.

S&F switch socket outlet combination multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F socket outlet 5 amps 3 pin 230 volts flush type on same board complete all as specified and as directed.

S&F in replacement of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as specified and as directed.

S&F MCB DB 8 way ,double door, with 200 amp rated busbar 240 V, SPN recess mounted all as directed and specified by engineer in charge. [Make : L&T / Legrand / HPL (O safe)]

S&F MCB SPN 40 amps,10KA, 240V,'C' series complete all as specified and as directed.

S&F in replacement of smart glow recess mounting LED 2' X 2' luminaries of 36 Watt with an inbuilt sensor, thus avoids unwanted hassle of creating space for sensors white acrylic drop light dissipator white powder coated CRCA housing with LEDs plane front frame fixed to housing, concave acrylic diffuser enables lighting conforming to Cat Part No. RC 383B LED 36S - 6500 PSU OD WH PIR of Phillips or or equivalent in Havells / Wipro / Jaguar / Syska make complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 4 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded cable 1100 volts grade,ISI - 694 marked in FRLS cable and including heavy duty, PVC casing caping including all accessories etc.with PVC ISI marked switch board with earth dolly switches / sockets etc , including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete all as specified.

M & L for Sub main wiring complete with two single core 10 sqmm, 1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm in and including PVC casing caping complete all as directed by Engineer-in-Charge [Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 2 runs of 10 Sqmm conductor and one run of 6 Sqmm earth wire shall be measured as one unit length]

S&F vertical 4 way TPN double door, recess mounted / wall mounted, MCCBs as incomer is 3 pole V-Tec of 100A rating & 16KA breaking capacity, MCCB is pre-fitted at factory & including price of MCCB complete all as directed and specified by Engineer-in-charge. [Make : L&T / Legrand / HPL (O safe)]

S&F MCB SPN 40 amps,10KA, 240V,'C' series complete all as specified and as directed.

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

metro electrical services

Aakar Construction

REKHA ELECTRICALS