Vanur/AGAMT-II/25-26/02

Amount

Construction of Anganwadi Building at Vilvanatham Panchayat

Earth work excavation and depositing on bank with intial lead and lift in all clasuses of soil such as Hard Gravely soil, Gravely soil except Hard Rock requiring Blasting etc complete as per SS20B for narrow foundation

Cement Concrete 1:4:8 mix using 40mm ISS HBG stone jelly for Foundation and flooring including cost,conveveyance of all materials and labour charges to laid in layers not more than 15cm thick, well rammed etc, complete with standard specification

Supplying and Filling in Basement with Filling Sand in layers not more than 15 cm thick , well ramed and consolidated complying with standard specification

Brick Work in Cement Mortor 1 : 5 mix using Country Bricks of size 22 x 11 x 7 cm including cost and conveyance of all materials and labour charges etc complete

Reinforced cement concrete in 1 : 1.5 : 3 , mix using 20mm iss HBG stone jelly for all reinforced cement concrete works excluding cost of centering and stell but including laying,vibrating,curing and finishing ,fixing fan clamps in the RCC floor and roof slab works wherevver necessery and bearing surface of the wall at the sides and bottom of the slab, beam shall be finished smooth with cement mortor 1:3 and craft paper without claiming extra cost.,complete compying with standard specification and as directed by the departmental officers

Supplying, Fabricating and placin g in position of RTS or MS rod for all reinforced cement concrete works as per design given including cost of steel and binding wire in all floors etc,complete complying with standard specification

Supplying, Fabricating and placin g in position of RTS or MS rod for all reinforced cement concrete works as per design given including cost of steel and binding wire in all floors etc,complete complying with standard specification

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels, StairCase Waist Slablanding slab landing beam Canopy etc in all floors with all cross Bracings using mild steel sheets of size 90cm x 60cm and 10BG stiffened withmild steel angles of size 25mmx3mm for boarding laid over country wood joists of size 10cmx6.50cm spaced at about 90cm centre to centre and supported by Casurina props of 10cm to 13cm dia spaced at 75cm centre etc, complete and as directed.

Below

above

Weathering Course Concrete by using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC Roof slab in the proportion of brick jelly to lime being 32 : 12.5 by volume and laid in a single layer and consolidated to the required slope and finished thickness by beating the concrete with wooden beaters if approved pattern keeping the surface constantly wet by sprinkling Lime jaggery water as per standard specification etc., complete as directed by the

Finishing the Top of Roof with one course of Pressed Tiles of size 23 cm x 23 cm x 2 cm laid in cement mortor 1 : 3 mix using M.Sand and Pointing with the same mortor mixed with water proof compound including cost conveyance of all materials and labour charges etc complete

Plastering with Cement Mortor 1:5,12mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specification as directed by the departmental officers

Provision for Cupboard Cuddapah slab 50 mm tk inclding supply and fixing etc

Granolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing etc

Plastering with Cement Mortar 1:3 mix 10 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Shahabad stone flooring laying with new ceramic tiles of size 600x600x20 mm laid in C M 1:3 inculding cost of white cement and labour charges etc

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying with std specification

Door 0.90 x 2.40 m

Door 1.10 x 2.40 m

Door 0.75 x 1.50 m

window 1.20 x 1.30 m

upvc 1.2 x0.4m

window 1.20 x 1.60 m

Ventilator 0.60 x 0.45m

Ventilator 0.60 x 0.45m

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete

Painting Two Coats with approved Exterior Emulsion over one coat of Primer Coat over plastered wall surface, ceiling and other new surface including cleaning , preparing the surface,curing,scaffolding charges etc, complete.

Painting Two Coats with new irion works

Europeon Water Closet

Baby friendly basin

Light point SD 25

Fan point SD 25

Fan SOR SD 107

Plug point SD 38

CFL lamp-BH fitting SD 80

DPIC swtich of 500 V SD 154

G I Pipe (40mm)

Service Wire SD 64

Exhaust fan SD 114

Bulk head fitting SD 83

E B Deposit

Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 49mm for having 50mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips and encasing the ends of the PUF PAnel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required. for Hall,Kitchen Area

Provision for BaLA painting cartoons,letters including all charges

Provition for ramp, toilet ramp Hand rails

Provition for Rain water harvesting

Provision for Name board and Photographic charges

Provision for 500L pvc tank

Provision for water suppy arrangements

Provision for Tactile signages

Provision for kids play equipments

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Om Sakthi Constructions (BID ID -1292152)