Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC C 49 B RADHA GARDEN MEERUT 250001 UP | MEERUT | MEERUT | UTTAR PRADESH | 250001 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹33.1 L+₹48,089.25 (1.47%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹33.7 L+₹1.1 L (3.40%)Rejected-Finance MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹33.9 L+₹1.3 L (4.02%)Rejected-Finance BASGO LEH 194 101 U T LADAKH INDIA | LEH LADAKH | LADAKH | 194101 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹34.0 L+₹1.4 L (4.33%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹38.8 L
EMD Value
₹77,700
Closing Date
8 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
PROVN OF 03 X TOILET BLOCKS AT R CENTRE UNDER GE 865 EWS
2022_MES_563236_1
865/EWS(NIT-90)/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹77,700
Yes
28 Dec 2022
15 Nov 2022
16 Dec 2022
15 Nov 2022
8 Dec 2022
30 Nov 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil , including spreading and levelling in layers n exc 25 cm thick complete all as specified and directed by Engr-in-Charge.
Excavating in trenches, n. exc 1.5 m wide and exc 1.5 m depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan in hard/dense soil and getting out soil, complete all as specified and as directed by Engineer-in-charge.
Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil complete all as specified and directed by Engr-in-Charge.
Excavating over areas, exc 1.5 m but not exc 3.00 m deep and getting out hard/dense soil complete all as specified and directed by Engr-in-Charge.
Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed and as directed by Engineer-in-Charge.
Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and as directed by Engineer-in-Charge.
M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base, foundation, filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge.
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Specified by Engr-in-Charge.
M&L mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar complete all as specified and directed by Engr-in-Charge.
All as per item No. 09 here-in- before but up to and including 6 to 8 mm dia in stirrups, spacers and binders as in columns and beams etc. as specified and directed by Engr-in-Charge.
M&L for 40 mm thick cement concrete 1:2:4 type B-0 as in damp proof course horizontal or vertical surfaces including with water proofing compound @ 200 ml per bag of cement with necessary formwork if required complete all as specified and directed by Engr-in-Charge.
M&L for use & waset of form work for rough finished to sides and soffits of suspended slabs such as roof, floor slabs, beams, roof beams, horizontal concrete surfaces complete all as specified and directed by Engr-in-Charge.
M&L Reinforced cement concrete (Nominal mix) 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, cantilevers and in shelves and the like all as specified and as directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type Bo using 12.5 mm graded stone aggregate as in coping including necessary form work etc complete all as specified and directed by Engr-in-charge.
M&L for rendering 10 mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick rendering in cement mortar 1:4 with using water proofing compound @200 ml/ 50 Kg bag of cement content on other than fair faces/fair face of brick/block walls /concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note : Liquid WPC will be measured and paid separately.
Supply only Liquid water proofoing compound complete all as specified and directed by Engr-in-Charge. Make as per PS.
M&L for 75mm thick PCC 1:3:6 type C 2 (using 40mm graded stone aggregate) as in sub base of floors/ pavings etc complete all as specified and as directed by Engr-in-Charge.
M&L for 25mm thick PCC 1:2:4, type B-0 using 12.50mm graded crushed stone aggregate as in sub base/ levelling course for laying of screed bed complete all as specified by Engr-in-Charge.
M & L for joint free Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes complete all as specified and directed. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY or specified in PS.
M&L Glazed ceramic coloured tiles in vertical surfaces (350 X 250X7mm ) / (450x350x7mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over rendering 10mm thick in CM (1:4) , for dado/skirting tiles.complete all as specified and as directed by the Engr-in-charge. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY or specified in PS
S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by Engr-in-Chage
Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.
S&F 2nd class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.
S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of 12mm thick veneered plywood commercial face complete all as directed by Engr-in-charge.Make as per PS.
S&F for 30 mm thick 2nd class hard wood plain framed factory made glazed and skeletion shutter shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as specified and directed by Engr-in-charge.Make as per PS.
M&L for plain sheet glass 4 mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.
S&F for Aluminium, anodized, barrel tower bolts, ISI Marked, of extruded section 150 mm long, complete all as specified and directed by Engr-in-Charge.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed by Engr-in-Charge.
S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.
S&F for 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by Engr-in-Charge.
M&L for 75 mm bore, PVC (SWR) pipes, pressure rating 6 kg/sqcm, single or double socketed, in any length with rubber ring joints, fixed to walls, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL
M&L for 110 mm bore, PVC (SWR) pipes, pressure rating 6 kg/sqcm, single or double socketed, in any length with rubber ring joints, fixed to walls, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL
S&F PVC (SWR) bents 110 mm bore complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed by Engr-in-Charge.
Stack clamps made out of 25mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for up to 110 mm bore pipe, complete all as specified and as directed by Engineer-in-Charge.
S&F Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. incl bedding with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate complete all as specified and as directed by Engr-in-Charge. Make: Cera/Hindware/Parryware
S&F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete, all as specified and as directed by Engr-in-Charge. MAKE: Cera Model Combiflush twin flush as per Cat Part No. B1020101 (Old Cat Part No 2603) or equivalent in HINDWARE/PARRYWARE
S&F 15 mm bore chromium plated, fancy type angle valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for complete all as specified by Engr-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm, long complete all as specified and diected by Engr-in-Charge. Make: Prayag/Polytuf/Supreme
S&F in 15mm bore, chromimum plated brass, Bib tap screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.
S&F 20 mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd
S&F 25 mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd
S&F 25 mm bore ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.
S&F Rotational moulded polyethylene water storage of capacity 1000 ltr PUF tank, PUF insulated with 75 mm thick PUF insulation of density not less than 48Kg/Cum, inner and out white, two layers, ISI marked (cylinderical vertical/rectangular/loft type with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge. MAKE: SINTEX/POLYWELL/ROTEX/POLYCON
M&L for hard core of broken stone or boulders of gauge n.exc 63 mm deposited, spread and level in layers n. exc. 15 cm thick watered and rammed to true surface complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L forming contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed by Engr-in-Charge.
M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.
M&L for preperation of new plastered wall surface of any description and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
M&L for preperation of new or previously untreated wooden surface any description of any description over 10cm in width or girth and applaying two coat of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed complete all as specified and as directed by Rngr-in-Charge.
M&L for Steel work in tubular trusses purlins, rafter, vertical posts, crane gantries, rails and fastenings and heavy brackets framing including special shaped washer, plates, angles etc complete using ERW or induction butt welded tubes, or reviting confrming IS 1161 -1979 grade St 240 complete all as specified and directed by Engr in charge
S&F for prepainted galvalume aluminum zinc chrome coating corrugated sheet of 0.50 mm thick of and colour having tensile strength 550 Mpa as in roof covering/clading to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed by Engr in charge
S&F for prepainted galvalume aluminum zinc chrome coating plain sheet of 0.50 mm thick of and colour having tensile strength 550 Mpa as in roof covering/clading to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed by Engr in charge
M&L for two coats of synthetic enamel paint over a coat of red oxide primer and surfaces of any description incuding preparation complete all as specified and directed by Engr in charge
M&L for 100 mm thick PCC 1:4:8 Type D2 (40 mm gradedaggregate) as in sub base of floors and pavings etc complete all as specified and directed Engr-in-Charge
M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.
M&L for Walling of random rubble, uncoursed stone masonary, well bonded, laid dry in retaining wall, abutment and similar work complete all specified and as directed by Engr-in-Charge.
M&L for Walling of random rubble, uncoursed stone masonary, well bonded, as in retaining wall, abutment and similar work built in cement mortar 1.:6 complete all specified and as directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping including necessary form work etc complete all as specified and directed by Engr-in-charge.
M&L for use & waste of form work to edges of concrete rough finished not exc 20 cm thick complete all as specified and directed.
M&L for precast cement concrete type 1:2:4 (20 mm graded aggregate) as in landings, cover slab for manholes, chulla hoods, chajja, water troughs, sheleves and similar articles with plain faces, setting in CM 1:6 complete all as specified and directed by Engr-in-Charge
M&L for rendering 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
Material and labour for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 110 mm bore pipes single socketed in any length complete all as specified and directed by Engr-in-Charge.
M/S KARAN BUILDERS
M/S SHAMSHER ALI SUFI
M/S SONAM NAMGIAL
BETONG BUILDERS
M/S SHUBHAM ENGINEERS & BUILDERS
Rampal Singh Contractor
Mehar Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .