Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹23.2 L
EMD Value
₹28,983
Closing Date
20 Oct 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Drinking Water and Sanitation Department
HARISHKUMAR
GADDEMANE,KIKREHOND, DHAREKOPPA AND KITLEBAILU ASHRAYA SITE HABITATION
RWSSD/2023-24/WS/WORK_INDENT4961
RWSSD/2023-24/WS/WORK_INDENT4961
Reserved
Water supply/sewage lines
Electronic Documents, First(One Cover)
RWSSD Division Office Chickmagaluru
1 document required · 1 mandatory
₹580
₹28,983
9 Oct 2023
9 Oct 2023
19 Oct 2023
PROVIDING 41 FHTC HOUSE HOLDS IN GADDEMANE,KIKREHOND, DHAREKOPPA AND KITLEBAILU ASHRAYA SITE HABITATION,DHAREKOPPA VILLAGE AND SRINGERI TALUK THROUGH SVS OPEN WELL AT DHAREKOPPA IN SRINGERI TQ (55 LPCD)
Providingsupplying to work site Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 803420003Phase SS Bowl Impeller with Low volt Motor as per specificationsas per necessary...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core sheathed of nominal cross sectional area as per IS 6941990 with ISI Mark and as per its latest amendmentsWS UGD work...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 7781984 with ISI Mark and as per its latest amendments WS UGD works CSR 202122 VolV PgNo162 SOR CodeP240B
Supply and delivery at site of brand new best make gate valve as per IS 7781984 with ISI Mark and as per its latest amendmentsWS UGD works CSR 202122 VolV PgNo162 SOR CodeP260A
Supply and delivery at site of brand new best make nonreturn valve as per IS 7781984 with ISI Mark and as per its latest amendments WS UGD works CSR 202122 VolV PgNo162 SOR CodeP250A
Supply installingtesting and commissioning COMMON control panel consisting of the following INCOMING1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Voltm...
Supply and delivery at site best indigenous brand new power capacitor as per IS 28341986 with latest amendments with KPTCL authorities and erection electrification and commissioning of the same at the...
Supply and delivery at site delivery of best indigenous brand new MCB Miniature Circuit Breakers of required capacity as per IS 882281978 and its latest amendments and with ISI Mark of 61016202540 Amp...
Supply and delivery at site 50mm2” dia heavy duty unplasticized PVC Column pipes with heavy duty collarsrubber profile ringvibration control profile ringfreezing and turbulence free leak proof EPDM ...
Labour charges for Erection Electrification and commissioning of Pump sets including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well caps c...
Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundationbed etccomplete as per...
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554 1988 with latest amendments from KPTCL pole to meter board unit with all necessary materials tools and ...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit WS UGD works CSR...
Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit WS UGD works CSR 20...
ProvidingSupplying and fixing suitable for 11 KV class UG cable filled with necessary bitumeninsulating compound complete with terminals clampsboltsnuts and washers etc with necessary materials and l...
Earthing Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit The pits should be filled up with equal proportion of salt...
Earth work excavation by manual means for drainscanals waste weir draft approach channels key trenches foundation of bridges and such simillar works in all kinds of soils as per drawing and technical...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing Size Stone masonry with hard stone in foundation plinth with Cement mortar 16 1 cement 6 coarse sand PWD CSR 202122 Vol2 PgNo9 SlNo54
Providing and Filling in foundation with granite trap broken metal 100mm and down size with approved MSand including hand packing ramming watering including cost of all materials and labour with all ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
RCC hume pipe Circular pump house Supplying precast RCC Circular Hume pipe pump house with MS door and RCC conical roof as per specification and drawings Internal dia Mtr 1200 mm height of 25 Mtr W...
Erection and positioning of RCC Hume pipe pump houseCistern on size stone masory platform including transportation charges and handlingfinishing with all necessary tools plants and materials etccomple...
Finishing walls with water proofing cement paint of required shade New work Two coats applied 484 kg10 m² to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar d...
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and forei...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt dust and foreign matte...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications including setting out construction of shoring stru...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications for WS UGD works CSR 202122 VolV PgNo63 S...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications for WS UGD works CSR 202122 VolV PgNo63 S...
Supplying laying and jointing HDPE pipes of specified grade and conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCode
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050 shaft of stainless steel wedge fully ...
Supply and fixing of Cast steel ASTM A 216 GrWCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420431 and spring shall be spring steel s...
Supply and fixing of Single Double chamber triple function tamper proof Both the orifces to be housed in the single chamber Air valves with Body and cover in Ductile cast iron of grade GGG 4050 All i...
Supplying and fixing surface box of required dia and size with synthetic lid for valves or spindle rods The surface box should be usable for 50 to 400mm dia valves PN 10 16 and will consist of lid ho...
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testi...
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part IIIIII class B or IS 779 and IS 2373 with life cycle test certificate from FCRI NABL accredited lab...
Refilling available earth around trenchespipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 15 m In...
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M20 Grade coarse an...
Construction of RCC Valve chamber for sluice valve as per drawing design and specifications as directed by the Engineer incharge as per typical estimateen closed
Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specificationsincluding setting out shoring strutting barricading caution lights inc...
Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specificationsincluding setting out shoring strutting barricading caution lights inc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing and laying in position Reinforced cement concrete of M25 Design Mix for raft footings beams below ground level in GLSR Foundation works The granitetrapbasalt crushed graded coarse aggrega...
Providing and laying in position Reinforced cement concrete M30 Design Mix for vertical side walls effluent channel baffle walls etc The granitetrapbasalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Reinforced cement concrete of M30 Design Mix for top dome The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine m...
Proving ThermoMechanically Treated bars of grade Fe550 Steel reinforcement for RCC work including straightening cutiing bending placing in position binding and anchoring to adjacent members whereev...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050 shaft of stainless steel wedge fully ...
Providing and fixing MS inspection door of size 60 cms x 60 cms including MS frame made of 50x50x6mm angle shutters made of 3mm thick MS sheets with hinges locking arrangements at top etc including pa...
Ladder inside the container Providing anodized aluminium ladder using 65mm x 32mm x 30mm ‘C’ section for ladder side channel x 25mm dia flutal pipe for Rungs at 250mm cc ladder fixed at an angle o...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh The plinth to be of RCC circular pillars and canopy with an orname...
Supplying and fixing DICI puddle flanges conforming to IS 71811986 with latest ammendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc comp...
Supplying Laying and Jointing Cast Iron CI double flanged pipes true to line hoisting of DIflanged pipe in position and aligning to correct plumb including cost of jointing materials conveying to wor...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc before removal of scaffolding for new RC...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and foreig...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt dust and foreign matte...
Construction of RCC Valve chamber for sluice valve as per drawing design and specifications as directed by the Engineer incharge as per typical estimateen closed
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications including setting out construction of shoring stru...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A Cu...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A cu...
Supplying laying and jointing HDPE pipes of specified grade and
conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...
Supplying laying and jointing HDPE pipes of specified grade and
conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusion Elbow 63 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusion Elbow 75 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusionTee 63 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusionTee 75 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusion Reducer 75 X 63 mm
HDPE End Cap with Pipe of 02 m lengthWS UGD works CSR 202122 VolV PgNo3 MAT Code5813
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050 shaft of stainless steel wedge fully ...
Providing 80 mm dia Air valve confirming to IS 1538 PartI to XXII 1978 with latest amendments if any RDWS Mysore circle PNO 1560
Supplying and fixing surface box of required dia and size with synthetic lid for valves or spindle rods The surface box should be usable for 50 to 400mm dia valves PN 10 16 and will consist of lid h...
Providing Laying and Fixing GI pipes conforming to IS 12391990
with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testi...
Refilling available earth around trenchespipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 15 m In...
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M20 Grade coarse an...
Providing and fixing board displaying information such as Name of work Tender cost Name of Contractor Work completion and liability period etc having rectangular shape of 120m x 090m size made out 18 ...
Construction of RCC valve chamber of size 10m X10m design and specifications as directed by the Engineer incharge as per typical estimate enclosed
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A Cu...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A cu...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earthwork excavation by manual means for drainscanals waste weir draft approach channels key trenches foundation of bridges and such simillar works in all kinds of soils as per drawing and technical ...
Providing and Filling in foundation with granite trap broken metal 100mm and down size with approved MSand including hand packing ramming watering including cost of all materials and labour with all ...
Approved make Electro fusion saddle comply with BS EN 12201 32011 PN 125 rating and food grade raw material as per BS 6920 for effect on water Quality intended for hum...
Flow control Valve 10 LPM Providing fixing Flow control valve using food grade materials SS 316 ball 12 15mm including cost of all materials labour charges HOM and testing complete as p...
Supplying MDPE pipe grade PE80 6kgcm2 53mm thick complete as per specificationsWS UGD works VolV PgNo31 MAT Code 3595
Supply of PPR Female Threaded Elbow confirming to IS 158012088 and DIN Standards 80778092 WS UGD works VolV PgNo SOR Code B194B
Supplying and fixing Multijet class B inferential type AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connectio...
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore 86mm long weighing not less than 88g complete as per specificationsWS UGD works VolII PgNo118 It No 13181
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Supply and delivery at site wrought middle steel galvanized 15 mm dia GI union confirming to IS 1239II 1991 with latest amendments if anyWS UGD works VolV PgNo145 SOR CodeN150A
Supply and fixing of HDPE water meter box with locking arrangementto protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x...
Providing and fixing brass bib cock of approved quality WS UGD works VolII PgNo115 It No 1321
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M20 Grade coarse an...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing and fixing RCC stand post for household connection of 30cms x 15 cms and 90 cms Deep using RCC M20 and 6 mm dia rods for verticals and stirrups and rendered smooth including fixing RCC stan...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications including setting out construction of shoring stru...
Supplying laying and jointing HDPE pipes of specified grade and
conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusion Elbow 63 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeHDPE End Cap with Pipe of 02 m lengthWS ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050 shaft of stainless steel wedge fully ...
Providing 80 mm dia Air valve confirming to IS 1538 PartI to XXII 1978 with latest amendments if any RDWS Mysore circle PNO 1560
Supplying and fixing surface box of required dia and size with synthetic lid for valves or spindle rods The surface box should be usable for 50 to 400mm dia valves PN 10 16 and will consist of lid h...
Providing Laying and Fixing GI pipes conforming to IS 12391990
with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testi...
Refilling available earth around trenchespipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 15 m In...
Providing and fixing board displaying information such as Name of work Tender cost Name of Contractor Work completion and liability period etc having rectangular shape of 120m x 090m size made out 18 ...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earthwork excavation by manual means for drainscanals waste weir draft approach channels key trenches foundation of bridges and such simillar works in all kinds of soils as per drawing and technical ...
Providing and Filling in foundation with granite trap broken metal 100mm and down size with approved MSand including hand packing ramming watering including cost of all materials and labour with all ...
Approved make Electro fusion saddle comply with BS EN 12201 32011 PN 125 rating and food grade raw material as per BS 6920 for effect on water Quality intended for hum...
Flow control Valve 10 LPM Providing fixing Flow control valve using food grade materials SS 316 ball 12 15mm including cost of all materials labour charges HOM and testing complete as p...
Supplying MDPE pipe grade PE80 6kgcm2 53mm thick complete as per specificationsWS UGD works VolV PgNo31 MAT Code 3595
Supply of PPR Female Threaded Elbow confirming to IS 158012088 and DIN Standards 80778092 WS UGD works VolV PgNo SOR Code B194B
Supplying and fixing Multijet class B inferential type AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connectio...
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore 86mm long weighing not less than 88g complete as per specificationsWS UGD works VolII PgNo118 It No 13181
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Supply and delivery at site wrought middle steel galvanized 15 mm dia GI union confirming to IS 1239II 1991 with latest amendments if anyWS UGD works VolV PgNo145 SOR CodeN150A
Supply and fixing of HDPE water meter box with locking arrangementto protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x...
Providing and fixing brass bib cock of approved quality WS UGD works VolII PgNo115 It No 1321
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing and fixing RCC stand post for household connection of 30cms x 15 cms and 90 cms Deep using RCC M20 and 6 mm dia rods for verticals and stirrups and rendered smooth including fixing RCC stan...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications including setting out construction of shoring stru...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A Cu...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A cu...
Supplying laying and jointing HDPE pipes of specified grade and
conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusion Elbow 63 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusionTee 63 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeHDPE End Cap with Pipe of 02 m lengthWS ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050 shaft of stainless steel wedge fully ...
Providing 80 mm dia Air valve confirming to IS 1538 PartI to XXII 1978 with latest amendments if any RDWS Mysore circle PNO 1560
Supplying and fixing surface box of required dia and size with synthetic lid for valves or spindle rods The surface box should be usable for 50 to 400mm dia valves PN 10 16 and will consist of lid h...
Providing Laying and Fixing GI pipes conforming to IS 12391990
with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testi...
Refilling available earth around trenchespipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 15 m In...
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M20 Grade coarse an...
Providing and fixing board displaying information such as Name of work Tender cost Name of Contractor Work completion and liability period etc having rectangular shape of 120m x 090m size made out 18 ...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A Cu...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A cu...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earthwork excavation by manual means for drainscanals waste weir draft approach channels key trenches foundation of bridges and such simillar works in all kinds of soils as per drawing and technical ...
Providing and Filling in foundation with granite trap broken metal 100mm and down size with approved MSand including hand packing ramming watering including cost of all materials and labour with all ...
Approved make Electro fusion saddle comply with BS EN 12201 32011 PN 125 rating and food grade raw material as per BS 6920 for effect on water Quality intended for hum...
Flow control Valve 10 LPM Providing fixing Flow control valve using food grade materials SS 316 ball 12 15mm including cost of all materials labour charges HOM and testing complete as p...
Supplying MDPE pipe grade PE80 6kgcm2 53mm thick complete as per specificationsWS UGD works VolV PgNo31 MAT Code 3595
Supply of PPR Female Threaded Elbow confirming to IS 158012088 and DIN Standards 80778092 WS UGD works VolV PgNo SOR Code B194B
Supplying and fixing Multijet class B inferential type AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connectio...
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore 86mm long weighing not less than 88g complete as per specificationsWS UGD works VolII PgNo118 It No 13181
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Supply and delivery at site wrought middle steel galvanized 15 mm dia GI union confirming to IS 1239II 1991 with latest amendments if anyWS UGD works VolV PgNo145 SOR CodeN150A
Supply and fixing of HDPE water meter box with locking arrangementto protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x...
Providing and fixing brass bib cock of approved quality WS UGD works VolII PgNo115 It No 1321
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M20 Grade coarse an...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing and fixing RCC stand post for household connection of 30cms x 15 cms and 90 cms Deep using RCC M20 and 6 mm dia rods for verticals and stirrups and rendered smooth including fixing RCC stan...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications including setting out construction of shoring stru...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A Cu...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A cu...
Supplying laying and jointing HDPE pipes of specified grade and
conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...
Supplying laying and jointing HDPE pipes of specified grade and
conforming to IS 49842016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusion Elbow 63 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusion Elbow 75 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusionTee63 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeElectro fusionTee 75 mm dia
SHDPE electro fusion specials and fittings wherever necessary like saddle Tee stub ends flanged sets bends reducers WS UGD works CSR 202122 VolV PgNo3 MATCodeHDPE End Cap with Pipe of 02 m lengthWS ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050 shaft of stainless steel wedge fully ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050 shaft of stainless steel wedge fully ...
Providing 80 mm dia Air valve confirming to IS 1538 PartI to XXII 1978 with latest amendments if any RDWS Mysore circle PNO 1560
Supplying and fixing surface box of required dia and size with synthetic lid for valves or spindle rods The surface box should be usable for 50 to 400mm dia valves PN 10 16 and will consist of lid h...
Providing Laying and Fixing GI pipes conforming to IS 12391990
with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testi...
Refilling available earth around trenchespipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 15 m In...
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M20 Grade coarse an...
Providing and fixing board displaying information such as Name of work Tender cost Name of Contractor Work completion and liability period etc having rectangular shape of 120m x 090m size made out 18 ...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A Cu...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading danger lighting etc in the classifications WS UGD works VolV PgNo63 SOR CodeA105A cu...
Earth work excavation for pipelinescables by Manual means upto 600mm trench width as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal...
Earthwork excavation by manual means for drainscanals waste weir draft approach channels key trenches foundation of bridges and such simillar works in all kinds of soils as per drawing and technical ...
Providing and Filling in foundation with granite trap broken metal 100mm and down size with approved MSand including hand packing ramming watering including cost of all materials and labour with all ...
Approved make Electro fusion saddle comply with BS EN 12201 32011 PN 125 rating and food grade raw material as per BS 6920 for effect on water Quality intended for hum...
Flow control Valve 10 LPM Providing fixing Flow control valve using food grade materials SS 316 ball 12 15mm including cost of all materials labour charges HOM and testing complete as p...
Supplying MDPE pipe grade PE80 6kgcm2 53mm thick complete as per specificationsWS UGD works VolV PgNo31 MAT Code 3595
Supply of PPR Female Threaded Elbow confirming to IS 158012088 and DIN Standards 80778092 WS UGD works VolV PgNo SOR Code B194B
Supplying and fixing Multijet class B inferential type AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connectio...
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore 86mm long weighing not less than 88g complete as per specificationsWS UGD works VolII PgNo118 It No 13181
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Providing Laying and Fixing GI pipes conforming to IS 12391990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary including testin...
Supply and delivery at site wrought middle steel galvanized 15 mm dia GI union confirming to IS 1239II 1991 with latest amendments if anyWS UGD works VolV PgNo145 SOR CodeN150A
Supply and fixing of HDPE water meter box with locking arrangementto protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x...
Providing and fixing brass bib cock of approved quality WS UGD works VolII PgNo115 It No 1321
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M20 Grade coarse an...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing and fixing RCC stand post for household connection of 30cms x 15 cms and 90 cms Deep using RCC M20 and 6 mm dia rods for verticals and stirrups and rendered smooth including fixing RCC stan...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
4961.docx
Tender Document • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .