Upgradation and improvement of Lakhanpur/ Basantpur pump House Building including Rest House. Part (B) Basantpur

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

White washing with lime to give an even shade a/ Old work (two or more coats)

Finish walls with water proofing cement paint of required shade . a/ old work(one or more coats applied @2.20kg/10sqm)over priming coat of primer applied @0.80Liters/10sqm complete including cost of priming coat.

Applying priming coat a/with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron /steel works

Painting on G.S sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work(One or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade , one or more coats on old work.

Dismentling doors,windows and clerestory windows (steel or wood)shutters including chowkhats ,architrave,hold fasts etc. complete and stacking with in 50mitre lead a/of area beyond 3sqm.

Providing wood work in frames of doors ,windows,clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(hold fast lugs or with dash fasteners shall be paid for separately) a/ Sal wood

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts,embedding hold fasts in cement concrete blocks of size 15X10X10cm with cement concrete 1:3:6(1cement:3coarse sand:6graded stone aggregate 20mm nominal size) painting two coats of approved wood preservative two sides of chowkhats and making good the demages to walls and floors as required complete,including disposal of rubbish to the dumoing ground within 50meters lead. a/ Door chowkhats

Providing and fixing ISI marked flush door shutters conforming to IS:2202(Part 1) non-decorative type ,core of blockboard construction with frame if Ist class hard wood and well matched commercial 3 ply beneering with vertical grains or cross bands and face veneers on both faces of shutters a/with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868)transparent or dyed to required colour or shade with nuts and screws etc. complete . a/ 250X16mm

Providing and fixing aluminium pull bolt lock anodized ISI marked (anodic coating not less than grade AC 10 as per IS 1868)Transparent or dyed to required colour and shade with necessary screws bolt nuts and washers etc complete .

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) Transparent or dyed to required colour and shade with necessary screws etc complete a/ 125mm

Providing and fixing ISI marked oxidized M.S tower bolt black Finish ,(barrel type )with necessary screws etc. complete a/ 200X10mm

Engagement of labour for making up temporary shuttering for taking out glass panes including proper disposal and also removing ceiling over pump area, removing vegetation from the roof of control room and pump house

Renewing glass panes , with putty and nails wherever necessary including raking out old putty . a/float glass panes of thickness 4.0mm (weight not less than 10kg/sqm)

Lettering with black Japan paint of approved brand and manufacture

Providing and fixing 1mm thick M.S. sheet door with frame of 40X40X6 mm angle Iron and 3mm M.S. gusset plates at the junctions and corners , all necessary fittings complete, including applying a priming coat of approved steel primer a/ Using M.S. angles 40X40X6mm for diagonal braces

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan ) with seat and lid ,10 liter low level white PVC flushing cistern ,including flush pipe with manually controlled device (handle lever)conforming to IS 7231,with all fitting and fixtures complete ,including cutting and making good the walls and floors wherever required a/ W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I brackets ,15mm C.P brass pillar taps ,32mm C.P brass waste of standard pattern ,including painting of fittings and brackets,cutting and making good the walls wherever required a/ white vitreous China wash basin size 630X450mm with a pair of 15mm C.P brass pillar taps

Providing and placing on terrace (at all floor levels)polyethylene Water storage tank ISI 12701 marked,with coverand suitable Locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank .

providing and fixing PVC pipes including fittings and other necessary works for supply of water from Rest House to Basantpur lift station.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with 1:3:6(1cement:3 coarse sand:6 graded stone aggregate 20mm nominal size

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: (a)Cement Mortar 1:6 (1 cement : 6 coarse sand)

Carriage of sand and stone aggregates from source to site of work avg. distance 15KM by Mechanical Transport

davinder singh

Janak Singh