COMPREHENSIVE MAINT OF OTM AND MD ACCN AT 12 AFH, 274 SU AND 756 SU AND PETTY REPAIRS OF DAY TO DAY MAINT AT 12 AFH UNDER GE (AF) GORKAHPUR

Amount

Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 storie height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished the surface fair and even complete all as specified. Note 1: - Supply only water proofing compound shall be measured and paid for separately.

Supply only integral water proofing compound (ISI marked).Copmplete all as specified and directed at site.

M & L for rendering 15 mm thick in cemnet mortor 1:6 on fiar faces of brick work or concrete surfaces & finish the surface fair and even complete all as specified.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling,finished even & smooth without using extra cement complete all as specified.

M& L prepaation of new plastered surface of wall and applying two coat of cement base paint over a coat ofalkali resistant primer primer and 2 mm tick wall care putty complete all as specified and directed

M & L for prepartion of new plasterred surfaces of wall and applying two coat of oil bond distermper over a coat of chalk whitening and 2 mm thick wall care putty complete all specified and directed

M & L for preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

All as per Item No.09 above but exc 1.50 Sqm and n.exc 4 sqm each Complete all as specified and directed at site..

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each Complete all as specified and directed at site.

Resecuring or easing & adjusting without taking of shutters of any description area n.exc 1 sqm each complete all as specified and directed.

S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete as directed.

M&L for second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/gauge etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I(2009)

S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.

S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010.

S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F 75 mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F in repairs 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F Aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified.

S&F in repairs Aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified.

S&F 150 mm long Aluminium anodized barrel tower bolt, complete all as specified.

S&F in repairs 150 mm long Aluminium anodized barrel tower bolt, complete all as specified.

S&F in repair 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repairs galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed in wooden/steel frame complete all as specified and directed.

S&F in repair 1st class Hard Wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or escription) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old galzing pins/springs clops and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

Cutting out old steel hinges (projecting type) from existing windows, S&F new hinges and welded, including cutting out and making good the jamb portion where required and making complete serviceable including applying two coats of synthetic enamelled paint complete all as specified and directed.

S&F in repair mortice lock of mild steel vertical type of size 150mm with 6 levers fixed to wooden/ aluminum doors complete all as specified and directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair two (double) legged floor door stopper of aluminium body and tongues anodess with hard drawer steel spring fixed in floor of 150mm complete all as specified and directed.

S&F in repair aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S&F 150mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and as directed.

M&L powder coated aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

M&L powder coated aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed .

S&F in repair curtain rod/rail with drapery rod plastic coating fancy type 25 mm dia including bracket and with two glob with necessary fitting etc measured end to end of globe as requirement at site complete al as specified and directed.

Repair/easing/readjusting of aluminium door/ window shutters by taking down shutters from frame and dismantling members of shutters like, glass, rails and style by necessary cutting, grinding of members etc and refixing same including rubber gasket, hinges, handle screws etc complete all as specified and directed.

S&F in repair prelaminated particle board, 18/19 mm exterior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removing from site complete all as directed.

All as per item No. 45 above but 20mm bore complete all as specified and directed.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

All as per item No. 47 above but 20mm bore Complete all as specified and directed at site.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 15mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

All as per item No. 49 above but 20mm bore Complete all as specified and directed at site.

S&F in repairs bib taps 15 mm bore brass, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia brass angle cock fancy type, with capstan head chromium plated screwed down high pressure with or without lettered with long screwed shank and fly nut screwed complete all as specified and directed.

S&F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.

S&F in repairs stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union. complete all as specified and as directed.

S&F in repairs 15mm bore CP central hole basin mixture for WHB fixed to GI pipe with braided hoses complete all as specified and as directed.

S&F in repairs gun-metal 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 32/40 mm spring type PVC waste pipe fixed to WHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should more than 0.70RM)

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 complete all as specified and directed

S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm complete all as specified and directed.

S&F in repair EWC. wash down water closet pan white excl. flushing cistern & flush pipe incl. plastic water closet seat cover closed pattern with flat bottom and cover and hinging device as per manufacturer instruction incl. connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc.complete

S&F in repair CP bottle trap for WHB having minimum water seal 32 mm complete all as specified and as directed.

S&F in repairs Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

S&F in repair PVC 10 Ltrs valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed. Make Prayag/polytuf or as approved by GE

S&F in repair sink with drainage board of stainless steel 1mm thick kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx 160mm with all fitting and fixture complete with necessary fitting all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed.

Dismantling water tank of capacity exc 250 ltrs but not exc 500 ltrs complete all as directed.

Dismantling water tank of capacity exc 500 ltrs bu n.exc 1000 ltr ltrs complete all as directed.

S&F rotational moulded polythylene water storage tanks 500lt capacity layered marked white colour (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore complete all as specified and directed.

S&F rotational moulded polythylene water storage tanks 1000 ltr capacity layered marked white colour (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 250 liters & n.exc. 500 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.

All as per item No. 73 above but exc. 500 liters & n.exc. 1000 liters capacity with bleaching powder @ 0.25 Kg per tank. Complete all as specified and directed at site.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of 15mm bore (Minimum weight 142 gms.) complete all as specified and directed.

All as per item No. 75 above but of 20mm bore (Minimum weight 210 gms.) complete all as specified and directed.

Taking down of rain water pipes, of any dia and pattern complete all as specified and directed.

S&F 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

All as per item No. 78 above but of 75mm dia Complete all as specified and directed at site.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

All as per item No. 80 above but of 75mm dia Complete all as specified and directed at site.

S&F stack clamps made out from 50 x5mm size flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) branch piece double, (double Y) equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed

S&F non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm and n.exc. 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.

S&F Glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

S&F in repairs PTMT grating 125mm dia complete all as specified and directed.

M&L in repairs incl dismantaling for 20 mm thick granite (of any type) (work table rubbed and polished) for urinal partition slabs terminating about 40 Cm above floor line fixed in CM 1:3 and pointing with white cement 1:2 using marble dust admixture to pigment to match the surface complete all as specified and directed.

S&F in repair PVC tank cover for 500 ltrs water tank complete all as specified and directed.

ditto, as per Item No 92 above but 1000 Ltr capacity each Complete all as specified and directed at site.

Dismantling wrought iron or MS work of any description not otherwise provided for Complete all as specified and directed at site.

S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc conforming to Fe 290, grade E-165 complete all as directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed.

S&F in repair PVC coloured bath cabinet overall size 500x410mm decorative design with looking mirror all as specified. Make:- Marrigold/Commander/Prayag

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L for spot welding in repairs not exc 2.5cm in length exc 6mm but n.exc 9mm thick complete all as specified and as directed.

S&F in repair Steel plate rack of size 750x600x250mm made out of 0.63mm thick steel sheet complete all as specified and as directed.

S&F in rubber door brush cill complete all as specified and as directed.

M&L for vitrified coloured ceramic tiles (dark shade) 10 mm thick (square/rectangular) area of each tiles n exc 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

ditto as above but in skirting/dado etc over 10 mm thick Cement plaster 1:4 complete all as specified and directed at site.

S & F steel windows with side hung shutters (single frame with double shutter)inside gauzed and outside glazed including projection type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded. complete all as specified and directed at site.

S & F steel ventilator with top hung shutters including hinges steel peg stay, guard bars 10mm sqare, MS bars welded @ 175 C/C horizontally etc complete all as directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 125 x 60 mm. complete all as specified and directed at site.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm.complete all as specified and directed at site.

M&L for vitrified coloured ceramic tiles (dark shade) 10 mm thick (square/rectangular) area of each tiles n exc 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

ditto as above but in skirting/dado etc over 10 mm thick Cement plaster 1:4. complete all as specified and directed at site.

Dismantling of Plain or corrugated steel/fibre sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Framed work as in doors or gates or grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde E- 250) complete complete all as specified and as directed.

S & F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets incl all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

M&L for mild steel round bar 10 to 12mm dia confirming Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in stiffeners to chain link fencing etc all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embeded in cement concrete.

M&L PCC 1:3:6 type C2 40mm graded stone aggregate as in fixing of fencing post and mass concrete all as specified.

Taking down chain link fencing fixed to any type of standard rails, straining bolts etc complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type of minimum dia 3.15 mm or above as directed. (Weight of chain link shall be decided through a B.O,O)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc.

Demolition of brick work built in cement mortar or cement lime mortar .complete all as specified and directed at site.

M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed at site.

All as per Item No- 121 here in above but except bricks complete all as specified and directed at site.

M&L plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel up to 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred/stopped ends etc.

M&L for providing cement concrete type C1 1:3:6 (20mm graded aggregate) as in copings complete all as specified and directed.

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes.

M&L Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as specified and directed.

M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles complete all as specified and directed at site.

M&L for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed.

M&L dismantling wall or ceiling board (fibre , pulp, insulation etc) or insulation boards/ slab, planks any thickness or size including cover fillets complete all as spcified and directed.

M&L for Anodised aluminium snap grid frame work of size 605 mmx 605 mm for false ceiling all as specified

M&L for 4.0 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for fixing celing grid frame work complete all as specified

S & F for 5mm thick PVC sheet fillet of width 35mm for wal panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S & F for 5mm thick PVC plain colour sheet use as in strips and channel feathered at the edges for fixing of solid PVC wall lining , insulated PVC qwall lining, solid PVC partition inclusive of solvent cement with all fixing arrangement as per specification and drawing complete all as specified and directed.

M/s Vivek Traders

M/S EASTERN TECHNOCRAFTS

M/s RAAJSHREE INFRA

M/S SHAILZA TRADERS

M/S RAJEEV KUMAR

M/S APARNA ASSOCIATES