REP/MAINT/REPLACMENT OF INT WIRING SUBMAIN WIRING CONTROL DBs MCBs U/S FITTINGS AND CONNECTED MISC ITEMS ZONE A AND B AND REP/MAINT OF DG SETS DG SET PANEL OIL FIRE INCINERATOR MECH LAUNDARY LIGHTING CONDUCTOR E/M EQPT AND ALLIED WORKS AT KPG AND SHE

Amount

M & L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M & L for Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including ,PVC casing and capping not less than 20mm size, medium grade with all necessary fittings along with continuous earth wire 1.5 Sqmm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly,with and including 1.6.mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover /on PVC reactangular box of suitable size complete for light/Call Bell point controlled by one switch complete aii as specified and directed.

All as per item No.2 here – in – before but for one light point controlled by Two Nos of 2 Way switches complete aii as specified and directed.

All as per item No.2 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete aii as specified and directed.

All as per item No.2 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs complete aii as specified and directed.

M & L for Point wiring with 2.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including ,PVC casing and capping not less than 20mm size, medium grade with all necessary fittings along with continuous earth wire 2.5 Sqmm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly,with and including 1.6.mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover /on PVC reactangular box of suitable size complete for mounting switch & sockets complete all as specified and directed.

M & L for point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including ,PVC rigid concealed conduit (heavygrade) andconduit accessories along with continuous earth wire 1.5 Sqmm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly,with and including 1.6.mm thick cadmium plated sunk MS pressed steel terminal boxes with 3mm thick plastic laminated sheet cover fixed with brass screws complete for light/Call Bell point controlled by one switch complete aii as specified and directed.

All as per item No 7 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete aii as specified and directed.

M & L for Point wiring with 2.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including ,PVC rigid concealed conduit (heavygrade) andconduit accessories along with continuous earth wire 2.5 Sqmm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly,with and including 1.6.mm thick cadmium plated sunk MS pressed steel terminal boxes with 3mm thick plastic laminated sheet cover fixed with brass screws complete for one socket outlet 15 Amps on independent board complete all as specified and directed.

Supply and fixing switch piano flush button, single pole, 5/6amps, one way all as specified and directed.

Supply and fixing switch piano flush button, single pole, 5/6amps, two way complete all as specified and directed.

Supply and fixing Bell, AC 230 Volts single pole including mounting block all as specified and directed.

Supply and fixing Bell push flush type, 5 Amps button complete aii as specified and directed.

Supply and fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin, 5 amps flush type all as specified and directed.

Supply and fixing switch socket combination 2 – in – one 5 Pin , 5 / 16 amps flush type universal all as specified and directed.

Supply and fixing LED batten surface / wall mounted with extruded polycarbonate housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 25,000 burning hrs (min) with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard all as per specified and directed.

Supply and fixing LED batten surface / wall mounted with extruded polycarbonate housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 25,000 burning hrs (min) with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard all as per specified and directed.

Supply and fixing lamp/angle holder insulated body with back plate for batten fitting all as specified and directed.

Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat sink of 10W complete all as specified and directed. CAT Part No : LHLDDDHBIA5R010 of Havells or Equivalent of Crompton/Philips.

Supply and fixing in repairs switch piano flush button, single pole, 5/6amps, one way all as specified and directed.

Supply and fixing in repairs switch piano flush button, single pole, 5/6amps, two way complete all as specified and directed.

Supply and fixing in repairs Bell, AC 230 Volts single pole including mounting block all as specified and directed.

Supply and fixing in repairs Bell push flush type, 5 Amps button complete aii as specified and directed.

Supply and fixing in repairs ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and directed.

Supply and fix in repairs switch socket combination 2 – in – one, 3 Pin, 5 amps flush type all as specified and directed.

Supply and fixing in repairs switch socket combination 2 – in – one 5 Pin , 5 /16 amps flush type universal all as specified and directed.

Supply and fixing in repairs modular switch flush button ac 230 V single pole 6 Amp one way all as specified and directed.

Supply and fixing in repairs modular switch flush button ac 230 V single pole 16 Amp one way all as specified and directed.

Supply and fixing in repairs modular socket 6 Amp 5 pin all as specified and directed.

Supply and fixing in repairs modular socket 6/16 Amp 3 pin combined all as specified and directed.

Supply and fixing in repairs LED batten surface / wall mounted with extruded polycarbonate housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 25,000 burning hrs (min) with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard all as per specified and directed.

Supply and fixing in repairs LED batten surface / wall mounted with extruded polycarbonate housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 25,000 burning hrs (min) with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard all as per specified and directed.

Supply and fixing in repairs 6 W LED 3000/6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver complete all as specified and directed. Make : Cat Part No : LHEBADP5IZ1W006 of Havells or Equivalent of Crompton/Philips.

Supply and fixing in repairs 9 W LED 3000/6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver complete all as specified and directed. Make : Cat Part No :LHEBADP5IZ1W009 of Havells or Equivalent of Crompton/Philips.

Supply and fixing in repairs 12 W LED 3000/6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver complete all as specified and directed. Make : Cat Part No : LHEBADP5IZ1W012 of Havells or Equivalent of Crompton/Philips.

Supply and fixing in repairs 15 W LED 3000/6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver complete all as specified and directed. Make : Cat Part No : LHEBADP5IZ1W015 of Havells or Equivalent of Crompton/Philips.

Supply and fixing in repairs LED 2X2 PANEL 36 W 3000/6500 K Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong /Grid ceiling complete all as specified and directed. Make : Cat Part No : LHEBAEP5IW1W036 of Havells or Equivalent of Crompton/Philips.

Supply and fixing in repairs LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including fixing arrangement complete all as specified and directed.

Supply and fixing in repairs lamp/angle holder insulated body with back plate for batten fitting all as specified and directed.

Supply and fixing in repairs LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 10W complete all as specified and directed. CAT Part No : LHLDDDHBIA5R010 of Havells or Equivalent of Crompton/Philips.

Supply and fixing in repairs LED bulkhead light of 10 W with system efficiency of ≥90 lumens/W, Ingress protection IP 66, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard all as per specified and directed.pressure die-cast housing along with polycarbonate diffuser and LED's IP-65 protction of watt,PF>0.95 complete all as specified and directed.

Supply and fixing in repairs Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. , Cat part No LHFOAJE1TN1I060 of Havells or equivalent model of Philips/ Crompton.

Supply and fixing in repairs LED bed side lamp 3W LED Black 3000K complete all as specified and directed. Cat Part No 48042 of Philips or equivalent in Havells/Crompton.

Supply and fixing in repairs LED Picture light, 6 Watt complete all as specified and directed. Make: Cat Part No 30973 of Philips or equivalent in Havells/Crompton.

Supply and fixing in repairs LED focus light, 20 watt, die cast aluminium housing, high quality light diffuser, robust driver, wide operating voltage 100V-240V, Colour temp- 6500K, Input power - 30 Watt, protection to IP 65, LED Beam Angle: 120° complete all as specified and directed. Cat Part No LHEECNP7PB6J020 of Havells or equivalent in Philips/Crompton.

Supply and fixing in repairs Gate/post top light in aluminum die cast with modern artistic design and white PC diffuser suitable with LED lamp B22 complete all as specified and directed.. Make : Cat Part No :LHFOASE1TZ5W009 of Havells or Equivalent of Crompton/Philips.

Supply and fix in repairs indoor LED PL-L Base lamp 4 pin, 18 watt, 6500K, 240 Volts, complete all as specified and as directed. Cat Part No LED PL-L 18W, 6500K 2G11 of Philips or equivalent in Havells/Crompton.

Supply and fixing in repairs LED Panel Driver 9 W / 12 W for round ceilinng light of various models, Input voltage - 220 to 240V, Frequency - 50 to 60 Hz, ta - -10 to +45 degree celcius, PF ≥ 0.50, input current - 0.090Amps, complete all as specified and as directed. Make : Cat Part No LSSLNW0169 of Havells or equivalent in Philips/Crompton.

Supply and fixing in repairs LED Panel Driver 15 W / 18 W for round ceilinng light of various models, Input voltage - 220 to 240V, Frequency - 50 to 60 Hz, ta - -10 to +45 degree celcius, PF ≥ 0.50, input current - 0.090Amps, complete all as specified and as directed. Make : Cat Part No LSSLNW0170 of Havells or equivalent in Philips/Crompton.

Supply and fixing in repairs LED Panel Driver 24 W for ceilinng light of various models, Input voltage - 220 to 240V, Frequency - 50 to 60 Hz, ta - -10 to +45 degree celcius, PF ≥ 0.50, input current - 0.090Amps, complete all as specified and as directed. Make : Cat Part NoLSSLNW0171 of Havells or equivalent in Philips/Crompton.

Supply and fixing in repairs SMPS suitable for OT Light, Input 100-120V AC 0.6A/200-240V AC 0.35A 50 Hz, Output +24V DC,1.1A complete all as specified and as directed. Make : Cat Part No MS-25-24 of TN instruments or equivalent.

Supply and fix in repairs Premium category of 7 W LED 3000 K Spike Light suitable for outdoor environment with IP65 protection complete all as specified and as directed. Make : Cat Part No LHEVACPBPN6K007 of Havells or equivalent in Philips/Crompton.

Supply and fixing in repairs TPN DB with suitable for TPN MCB incomer, double door (IP-54), 4 Ways, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, flushed in wall or fixed on surface complete all as specified and directed.

Supply and fixing in repairs Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 4 way 240 Volts AC flushed in wall or fixed on surface complete all as specified and directed.

Supply and fixing in repairs Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 8 way 240 Volts AC flushed in wall or fixed on surface complete all as specified and directed.

Supply and fixing in repairs Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 12 way 240 Volts AC flushed in wall or fixed on surface complete all as specified and directed.

Supply and fixing in repairs metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified and directed.

Supply and fixing in repairs 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No 59 here – in – before but DP 32 Amps complete aii as specified and directed.

All as per item No 59 here – in – before but DP 40 to 63 Amps complete aii as specified and directed.

Supply and fixing in repairs 415V, 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 Amps. capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 2.5 sq mm + one run of 2.5 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 2.5 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length complete all as specified and directed.

M&L in repairs PVC rectangular box for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

All as per item No 68 here-in-before but of size 175 x 100 x 50 mm complete all as specified and directed.

All as per item No 68 here-in-before but of size 200 x 150 x 50 mm complete all as specified and directed.

M&L in repairs Hylam Sheet including suitable size of 04 Nos brass screws and cutting of hylam sheet for mounting, switches, sockets, fan regulator etc. of size 100 mm x 100 mm and 3 mm thickness complete all as specified and as directed by Engr-in-charge.

All as per item No 71 here-in-before but of size 175 x 100 x 3 mm complete all as specified and directed.

All as per item No 71 here-in-before but of size 200 x 150 x 3 mm complete all as specified and directed.

Supply and fixing in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc all as specified and as directed.

Dismantling of ceiing fans of AC single phase 230/240 volts of any make / model except old vintage, dismantling stator, rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire of existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish, cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws, condensor, ball bearing etc, as required and reassebling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs unservicable broken/burnt ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete including dismantling of broken fan and deposit to MES store all as specified and directed.

Supply and fixing in repairs on surface Rigid non-metallic PVC casing caping of size 25 mm including of all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old broken PVC Casing caping and making good surface by plastering and 2 coat of paint complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1 : 3 : 6) type C-1 , 50 mm thick pre cast RCC (1 : 2 : 4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

Material and Labour for ‘B’ check servicing all as per manufacturer instructions, including cost of following ‘B’ check spares and minor spares required for carrying out the check like nut, bolts, washers, gaskets, screws, hose clamps, including draining out old engine oil and filling in new engine oil, filling in/top up coolant in radiators of water cooled engine, taking out air filter element cleaning the same with compressed air for removing the dust or replace unserviceable element with new element, cleaning of waste oil or coolant from engine and near by spare parts of engine of capacity 62.5 kVA,complete including testing after repair for its smooth functioning :- (a) Lubricating oil filter - 01 No (b) Fuel filter - 02 Nos (c) Minor spares and waste cotton for cleaning - 01 Kit( Note : 1. Quoted rate deemed to be included fuel filter kits and lubricating oil filter kits and minor spares required for check. 2. Engine oil, Coolant for radiator, distilled water and new air filter element shall be measured and paid separately under relevant items of this schedule.

All as per item No 79 here-in- above but DG set of capacity 50 KVA (a) Lubricating oil filter - 01 No (b) Fuel filter kit - 01 No

All as per item No 79 here-in- above but DG set of capacity 40 KVA (a) Lubricating oil filter - 01 No (b) Fuel filter kit - 01 No

All as per item No 79 here-in- above but DG set of capacity 30 KVA (a) Lubricating oil filter - 01 No (b) Fuel filter kit - 01 No

All as per item No 79 here-in- above but DG set of capacity 25 KVA (a) Lubricating oil filter - 01 No (b) Fuel filter kit - 01 No

All as per item No 79 here-in- above but DG set of capacity 10 KVA (a) Lubricating oil filter - 01 No (b) Fuel filter kit - 01 No

Supply only engine oil grade 15W40 against 'B' check servicing and as per the capacity of engine model and as per manufacturers recommendation complete all as directed.

Supply only coolant against 'B' check servicing for radiator of water cooled engines of any make /capacity and as per manufacturers recommendation complete all as directed.

Supply and topup / replace distilled water for battery or radiator of engine complete all as directed.

Supply only Air filter suitable for DG set Engine of make Kirloskar and capacity 62.5 KVA complete all as specified and directed.

Supply only Air filter suitable for DG set Engine of make Kirloskar and capacity 50 KVA complete all as specified and directed.

Supply only Air filter suitable for DG set Engine of make Kirloskar and capacity 40 KVA complete all as specified and directed.

Supply only Air filter suitable for DG set Engine of make Kirloskar and capacity 25 KVA complete all as specified and directed.

Supply only Air filter suitable for DG set Engine of make Kirloskar and capacity 10 KVA complete all as specified and directed.

Supply & fixing in repair of lead acid battery 12 Volts 150 AH having 36 Month warranty including filling of electrolyte, initial charging of battery etc incl making connection with self starter complete all as specified directed.

Supply & fixing in repair of lead acid battery 12 Volts 75 AH having 36 Month warranty including filling of electrolyte, initial charging of battery etc incl making connection with self starter complete all as specified directed.

Supply and fix in repair 'V' belt ribbed of (a) radiator fan belt, (b) battery charging dynomo belt, and (c) water pump belt all suitable for DG set 1 x 50 KVA complete all as specified and directed.

Supply and in repair 'V' belt ribbed of (a) radiator fan belt, (b) battery charging dynomo belt, and (c) water pump belt all suitable for DG set 40 KVA complete all as specified and directed.

Supply and in repair 'V' belt ribbed of (a) radiator fan belt, (b) battery charging dynomo belt, and (c) water pump belt all suitable for DG set 25 KVA complete all as specified and directed.

Material and labour for descaling and servicing the radiator of DG set 62.5 to 30 KVA, Make :Kirloskar internally and externally by using chemicals, to remove deposit on fins and soldering the tubes and tank etc for arresting leakage and re-fixing after replacement of unserviceable hose pipes with clamps and filling of Collent, complete all as specified and directed by Engr-in-charge. Note : Coolant excluding will be mesured and paid under respective item.

M&L for dismantling the unserviceable FIP from DG set engine and taking it to reputed workshop for cleaning, overhauling/servicing and calibration with prescribed overhauling kit of any capacity DG set with replacement of unserviceable parts/spares as required for repair/replacement of injectors, re-fixing the FIP and checking the same for its smooth functioning on DG set complete all as directed.

S&F in repairs battery terminal leads of 2AWG (35sqmm) copper wire single core PVC insulated 1.5m long of colour coding red or black complete with brass terminals fixed at site with petroleum jelly complete all as specified and directed.

Cleaning of DG set fuel tank of capacity upto 62.5 to 40 KVA by draining out residual oil and removal of sludge from bottom of the tank complete all as directed.

Cleaning of DG set fuel tank of capacity upto 30 to 10 KVA by draining out residual oil and removal of sludge from bottom of the tank complete all as directed.

S & F in repair MCB SP 6 to 32 A, 240V,50Hz, C series breaking capacity 10kA all as specified and directed.

Supply and fix in relacement of Power contactor 4 pole 415 Volt, 100Amps Model no L&T MCX-22 including all electric connections as per existing complete all as specified and directed.

Supply and fix in relacement of Power contactor 4 pole 415 Volt, 160Amps Model no L&T MCX-32 including all electric connections as per existing complete all as specified and directed.

Supply and fix in relacement of Power contactor 4 pole 415 Volt, 63Amps Model no L&T MCX-12 including all electric connections as per existing complete all as specified and directed.

Supply and fix in relacement of Auxilary contact unit 4 pole 415 Volt, 16A Model no L&T MNX-A2 including all electric connections as per existing complete all as specified and directed.

Supply and fix in relacement of Auxilary contact unit 2 pole, 415 Vot, 16A Model no L&T MCX-A1 including all electric cionnections as per existing complete all as specified and directed.

Supply and fix in relacement of Auxilary contact unit 4 pole, 415 Vot, 10A Model no L&T MCX-A2 including all electric cionnections as per existing complete all as specified and directed.

Supply and fix in relacement of Auxilary contact unit 2 pole, 415 Vot, 10A Model no L&T MCX-A6 including all electric cionnections as per existing complete all as specified and directed.

Supply and fix in relacement of Spare coil for contact unit 2 pole, 415 Vot, 10A Model no L&T MCX-32 including all electric cionnections as per existing complete all as specified and directed.

S & F in repair 12 & 24 V DC 3 Phase Auto mains failure Microprocessor based relay for Genset ,with 2Digit, 7 Segment display have LED indicator for input status,DG fault input status, battery status suitable for DG set AMF panel board all as specified and directed.

S & F in repair 415 V AC Protective Relays for overvoltage,under voltge, phase reversal relay suitable for AMF/LT panel board complete all as specified and directed.

S & F in repair fully automatic battery charger input 230V AC and output 12V DC,10 Amp for 12 Volt battery complete all as specified and directed.

S & F in repair multifunction meter flush mounting accuracy class 1.0 in AMF panel complete all as specified and directed.

Supply and fix in replacement of CT 100/5A ratio, 5 VA, CL-1 of DG set Panel /Feeder pillar box complete all as directed at site.

S&F MCCB with Thermal - magnetic release of 63-100 Amps, 4 Pole, 415V, 25 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories and taking down old unserviceable complete all as specified and directed.

S&F MCCB with Thermal - magnetic release of 125 Amps, 4 Pole, 415V, 25 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories and taking down old unserviceable complete all as specified and directed.

S&F MCCB with Thermal - magnetic release of 200 Amps, 4 Pole, 415V, 36 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories and taking down old unserviceable complete all as specified and directed.

Supply and fix MCB, Tripple Pole & Neutral, 40-63 Amps, 415 volts, 50 Hz, 16kA complete all as specified and directed by Engr-in-Charge.

Labour only for attending breakdowns of DG sets/AMF panels through skilled technician from reputed service centre of DG sets with necessary tool kits, checking Engine and alternator for defects, carryout necessary repairs works to rectify the defects without major overhauling/opening of Engine or Alternators, replacing of worn out parts of AMF panel/DG set and testing DG set for its smooth functioning on full load complete all as directed. Note : 1. Necessary spares required to rectify the defects shall be measured and paid separately as supply only under relavant items. 2. The complaint shall be attended and rectifed within 24 hours from time of reporting by Engr-in-Charge or his authorised representative. 3. Any Major defects shall be reported on priority to Engr-in-Charge to avoid undue delay in fuctioning of installation.

Supply only rubber hose pipe set (oil Hose/ radiator hose /CR Hose/Makeup Hose) suitable for DG sets of capacity ranging from 20 KVA to 75 KVA all as per existing sample with GI clamps and Nut bolt, washers for DG set complete all as directed.

Supply only Flywheel ring with proper setting and alignment for upto 62.5 KVA complete all as specified and directed.

M&L for disconnecting, dismantling and repairing of turbo charger assembly for DG set including replacement of Kit Turbo Repair , Shaft, Sleeve Turbocharger, Support Turbocharger Seal etc including testing and refixing to its original position properly complete all as specified and directed .

S & F in repair of automatic voltage regulator (AVR) card of three Phase 415 Volt ,50Hz for alternator of capacity upto 62.5kVA of any capacity complete all as specified and directed.

Dismantling unserviceable battery charging dynamo from DG set of rating 1 x 12 / 2 x 12 Volts complete repairs and servicing including replacement of bushes, bearings, Carbon brushes, rectifiers, rewinding of field magnet coil / rotor armeture coils and any other minor parts required all as directed and fixing on engine including testing/commissioning complete for DG set having any capacity upto 62.5kVA complete all as directed.

Dismantling old unserviceable Self starter of Diesel engine and supply and fixing new self starter of working voltage 12 volt/24 Volt DC and same as per existing model suitable for fixing on engine set including testing after installation complete all as directed.

M&L for disconnecting and taking down burnt self starter, 12 volts DC, from 20 KVA to 62.5 KVA DG sets for repairing including replacement of bendex pinion, bush set, winding of armature and winding of field coil assembly etc and reassembling the same as original complete refixing in its original position including testing complete all as specified and directed.

Excavation in trenches in soft/ loose soil not exc 1.5 mtr wide and not exc 1.5 mtr deep in for lying of electric cable, pole foundation and stays etc and getting out, trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engr-in-charge.

Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 250mm thick after cable are laid and tested all as specified and directed.

Removing excavated material (Surplus soil) to a distance not exc 50m and depositing where directed at level not exc. 1.5m above the starting point all as specified and directed.

Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches, total 23 CM complete all as specified. Note - for measurement purpose punned thickeness 18 CM shall be considered

S &L sub class B bricks having minimum compressive strength 75 Kg/Sqcm laid in trenches for cable protection etc complete all as directed by Engineer -in-Charge.

M&L in repair for GI pipe light grade 40mm bore with all fittings to be laid in trenches or in floors/fixing with pole,including complete all as speciffied and as directed.

Cutting through existing bituminous road /PCC/floor/approx size width 50cm X 60cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish, M&L complete all as specified.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 70 Sqmm 3.5 Core complete aii as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 50 Sqmm 3.5 Core complete aii as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 35 Sqmm 3.5 Core complete aii as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in trench/ on wall with the help of shadel including suitable cable lugs and electric connections all as specified at site cable size of size of 25 Sqmm 3.5 Core complete aii as specified and directed.

Dismantling / Taking out Unserviceable LT cables of size upto 35 sqmm any core from any position i.e ground / walls / poles / culverts etc complete with protection pipe all as specified and directed by Engineer-in-Charge.

Dismantiling the incinerator, cleaning completely all the parts and carrying out necessary repair.And re-assembling the incinerator and testing after re-assembling, complete all as directed by Engr-in-Charge.

Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of Laundry Machine 30 kg capacity set complete of following ( Dismantiling laundry machines , cleaning completely all the parts and carrying out necessary repair, re-assembling and testing). All as directed by Engr-incharge.

Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of Laundry Machine Dryer 30 kg capacity set complete of following ( Dismantiling laundry machines , cleaning completely all the parts and carrying out necessary repair, re-assembling and testing). All as directed by Engr-incharge.

Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of Laundry Machine Extractor 15 kg capacity set complete of following ( Dismantiling laundry machines , cleaning completely all the parts and carrying out necessary repair, re-assembling and testing). All as directed by Engr-incharge. Extractor 15 kg capacity

Supply & fix in replacement of single pointed air termination Alminium rod 12mm dia and 300 mm long incl support block incl taking down u/s complete all as speicified.

Supply & fix in replacement of single pointed air termination Copper rod 12mm dia and 300 mm long incl support block incl taking down u/s complete all as speicified.

Supply and fix in replacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawin in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32x6mm GI strip incl taking down u/s strip any type complete all as specified and directed.

Supply & fix in replacement of aluminium strip 25mmx 3mm as a roof conductor or down conductor complete all with saddles and fixing screws for fitting the strip complete all as specified and directed by Engr-in-charge at site.

M&L for straighting and alignment of existing aluminium strip connected as lightning condoctor in roof/ wall in any type of building complete all as specified and directed.

Supply & fix in replacement of HDPE/porceiline insulator 15 BMD type T with nut bolts / screws for fixing of copper / aluminium strips / GI strips on walls etc to the wall / floor/pole or any indicated location etc complete all as specified and directed.

Supply and fixing in replacement of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm , drilled and screwed including 3 nos. 8mm dia 25 mm long hex. head screw, complete with suitable polycaronate box with locking arrangement all as specified and directed by Engr-in-charge.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

GYANENDRA THAPA (BID ID -3346762)

MS BRAHMA CONSTRUCTION (BID ID -3346727)

M/S JAYSHREE CONCERN (BID ID -3346760)

Janata Enterprises (BID ID -3346816)

RAMESH GURUNG (BID ID -3346733)

Sri Gupta Construction (BID ID -3346444)