NAGAR PANCHAYAT GARAUTHA KE MOHLLA RAJENDRA NAGAR ME KHANJA BABA KI TALAIYA KA SOUNDAYKARAN KA KARY

Clearing jungle including uprooting of rank vegetations grass, bush, wood trees and saplings of girth upto 30 cm. Measured at a height of 1 metre above ground level & removal of rubbish upto a distance of 50 metres outside the periphery of area cleared. SI No. 259.Ch-4.

Earth work in filling and cutting for embankment with mechanically compacted.

Boring of 30 cm dia piles of double under reamed of 50 cm dia of bulb and 3.5 m depth in black cotton soil with hand operated auger machine including all labour and T&P etc. for proper completion of work. As per IS Code 2911 (Part-III) 1980.New Item 5, Ch- 4.

Excavation in soil mixed with moorum/ shingle/ kankar requiring the use of special T&P such as pickaxes, subbals etc.including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. S.I no - 252.Ch.4

Sand filling in plinth including supply of necessary quantity of sand approved quarry from the site of work & including watering, dressing etc. Rate to include cost of all materials, labour and tools & plants etc. (As per S.I. no.-255)

Cement concrete with 4 cm (1.5") gauge approved stone ballast, approved coarse sand and cement in the proportion of 8 : 4 : I including supply of all materials, labour and T & P etc. required for proper completion of the work. SI No. 281

R.C.C work with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in Plinth beam/lighter beam excluding supply of reinforcement and its binding wire and including its fixing and binding the same with 24 B W.G.G.I. binding wire an including neccecary centering & shuttering etc & also including supply of all materials labour & T&P etc required for proper completion of the work. Binding wire cost being included in the item No-285 1st.Ch-5.

RCC work with cement approved coarse sand, and 2cm (3/4") gauge, approved stone ballast in the proportion 1:1.5:3 in Column, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.SI No.288-1st.Ch-5.

Brick Work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in foundation Cement mortar 1:6 (1 cement : 6 coarse sand) as per sor S.I. No. DSR 6.34.Ch-6.

Brick Work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure Cement mortar 1:4 (1 cement : 4 coarse sand) as per sor S.I. No. DSR 6.34.Ch-6.

Earth work in cutting or in Filling in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20") in depth and earthwork in embankment to be in 20 cm(8") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5fts) lifts and 30 m. (100') lead. The earth from cutting to be used in making filling or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by Engineer-in-charge. S.I. No.253.Ch-4.

RCC work with cement approved coarse sand, and 2cm (3/4") gauge, approved stone ballast in the proportion 1:1.5:3 in Slab, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. S.I. No.284 (1) Ch-5.

Mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured.SI. No. 504.Ch-10

12 mm thick plaster on brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.58(III)

15 mm thick plaster on rough side brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.59(3)

Providing and applying Plaster of paris putty of 2 mm Thickness over plasterod surfaco to prepare the surface even and smooth complete. S.I. No. New item Ref. DAR-13.26. Ch.-15.

Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials labour, tools and plants etc. required for proper completion of work.SI No.660+661

Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work.S.I. No. New item-2, Ch-10.

Painting or Varnishing on iron works in small areas or new wood work with two coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the I.S.I.No. 103 1950

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing and laying of 80mm Interlocking concrete block pavement laid in stone dust base and fill joint with fine sand. Joint filled after labling and dressing base including supply of all material, labour, T&P etc required for proper completion of the work.SI. No. New Item-3 Ch.-14.

P/F of Submersible pump I/C supply of approved quality Motor of 2 HP I.S.I mark and boaring Casing Dia of 125 mm with Starter panel, cable and necessarily all fittings comp with labour T&P etc required for proper completion of work as per direction of Engineer E/I . SOR 2014

Supply & Fixing cemented I shap Chair in park.

Supply and installing of low density polyethylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. Tank should be ISI marked (for 500 Liters)

Supply & fixing the moduler fiber animal dustbins for park.

Supply and Laying small plant and grass for making of park.

Supply, providing, laying and fixing of Chest Press Double gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Leg Press Double gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Triple Twister gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Shoulder Builder Double gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Parrallel Bar gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Air Walker gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Double Bar gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Sit Up Board Double gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Single Horizontal Bar gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Sky Walker Double gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Rower gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Pec Dec Machine gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of A-Type Climber gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of See Saw gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Circular Wwing gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Revolwing Platform gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Supply, providing, laying and fixing of Slider 8' gym equipment including cartage, material, labour T&P etc. as per direction of engineer in charge.

Please Enable Macros to View BoQ information