Renewal of existing BT Road at P.T.Rajan Main Road (Reach-II) in ward no.15 and Renewal of existing BT Road at P.T.Rajan Main Road (Reach-I) in ward no.32

Amount

Preparing the existing surface to laying the road to proper gradient and remove the loose soil without damage the waer supply pipes. The rate inclusive of all charges such as earth work Excavation soil deposting earth as shown by the department all officers with an initial lead of 10 meters and lift etc., Complete including sectioning and leveling.

Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers.

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM) Specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specification (Road Data Page No : 16, Sl.No : 8)

Charges for cutting the BT surface 5 to 7cm depth using milling machine conveying the milled waste materials to at least for 20km distance including hire and running charges for the machine conveyance charges. Unloading at un objectionable place. cleaning the milled surface as to avoid slippery including all other incidental and unforseen items etc, complete.

Providing and laying prime coat of 7kgs / 10sqm over the WMM surface treated with primer using 7 kgs of bituminous emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev V specifications. (Road data Page no : 14, Sl.No : 5)

Providing and laying tack coat of 2.5kgs / 10sqm over the prime surface treated with binder using 2.5kgs of bituminous emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V specifications. (Road data Page no : 14 Sl.No : 6)

Providing and laying tack coat of 2.00kgs/10 sqm over the BT surface treated with binter using 2.00 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by vibratory / Pneumatic roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20 - 30t CMP with bitumen boiler, tipper trucks, paver finisher/9m paver finisher, vibratory / pneumatic rollers and all other tools and plant required, Including fuel and all other incidential charges ect., Complete as per specification using CMP as per Clause 505 MORTH Rev-5. (Road Data Page no : 21 Sl.No : 14)

Advance Patchwork 13.20mm Providing Advancve Patchwork using 50mm consolidated Thickness by using 1m3 of 13.20mm IRC Metal with 44kg of Bittumen per 1m3 of Metal For Pre Mixing For existing surface advance Patchwork including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the premeasurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing them with bitumen in mini hot mix plant for pre mix carpet only rolling by 60-70KN power roller for pre mix carpet and seal coat seperately including labour charges for spreading the mix for pre mix carpet application of bitumen for seal coat over pre mix carpet, including labour charges for spreading seal coat seperately over premix carpet etc.including higher charges and fuel charges for, bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V Specifications

Providing and laying Bituminous concrete to 30mm/40mm thick using 0.13cum of 19.00 - 9.50mm, 0.17cum of 9.50 - 2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in cenral hot mix plant 20 - 30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8 - 10 tonne vibratory / Pneumatic roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20 - 30t CMP with bitumen boiler, tipper trucks, paver finisher / 9m paver finisher, vibratory / Pneumatic roller and all other incidental chagres etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5. (Road data Page no : 24, Sl.no : 16)

Supply of FRC Manhole 600 mm size dia cover with frame including cost of conveyance loading fixing the same etc complete.,

Providing and laying of hot applied thermo plastic compound 2.50mm tk including of 2.50mm exchanging of surface applied glass beads as per IRC :35 the finished surface to level uniform and free from sticks and hole etc,complete.

Manufacturing supply and fixing of retro reflective road name sign board double arrow big size 1.00m x 0.50m size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32NB stainless steel pipe all around and 65NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm x 30cm x 45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 67-201 guidelines, 7years pre qualification warrenty for retro reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be retro reflective type XI. The retro reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification.

Add GST 18%

M ARULRAJ