PROVN OF CERTAIN MINOR REVENUE AND LBW WORKS AT VARIOUS LOACATIONS OF LUCKNOW CANTT UNDER GE EM LUCKNOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for 350x 250x 7mm/ 450X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in CM 1:4 finished even and rough complete all as specified and directed.

M & L for providing and fixing of E-board 600x600x4mm thick white prelaminated self embosed reinforced designer ceiling tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section/Angle section complete all as specified and directed.

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames not exc. 1.5 sqm each all as specified and directed.

S & F solid door frame of size 50mmx47mm made out of 5mm thick PVC sheet prelaminated on single side and plain on other side, reinforced with MS square tube including painting of edges to match with prelaminated sheet, fixed in opening as per specification & drawing complete all as specified and directed.

S & F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk complete all as specified and directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work/ concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and directed.

M&L for rendering 15 mm thick in two layers, 10mm as rendering coat and 5mm as setting coat with water proofing compound on brick work/ concrete on fair surfaces surfaces in cement mortar 1:4 complete all as specified and directed.

Supply only integral WPC of approved quality complete all as specified and directed.

M&L for complete removal of existing treatment on walls complete all as specified and directed.

M & L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth on wall/ceiling surfaces complete all as specified and directed.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over wall/ceiling surfaces complete all as specified and directed.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old work over wall/ceiling surfaces

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S & F for virteous china wash down water closet pan (pedesatal patter) white (excluding fixing bolts, flushing cistern and flush pipe

S&F Low level flushing cistern, moulded from virgin poly propylene complete all as specified and directed.

S&F for CP angle cock (two way) complete all as specified.

S&F for health faucet, chromium plated rising spray with wall brackets with 1.5m long metallic flexible tube with 15 mm dia fixed in repair complete all as specified and as directed.

S&F white Toilet paper holder of stainless steel (specified make) fixed to walls with chromium plated (CP) brass screws complete all as specified.

S & F PVC connection 15mm size with PTMT nut of length 450mm

S & F stop cock one way (Angle valve) 15mm dia chromium plated cast copper alloy screw down pipe pressure with crutch or butterfly handle scrwed both ends for iron pipe or union

S&F for vitreous china standard pedestal white WHB complete all as specified and directed. (Note : Rate includes for S&F of MS cantilever brackets).

S & F 15mm dia pillar taps fancy type cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm)

S & F 100 mm dia grating doom of PTMT (min weight 20 gm each)

S&F looking mirror 600x450 mm consisting of 4 mm thick glass mounted on 4 mm thick plywood and providing decorative type wooden beading with varnish finish all as specified and directed by GE.

S & F chromium plated soap tray fixed with rawl plugs complete.

S& F for Tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F bib taps for 15 mm bore pipe cast copper alloy chromium plated fancy type with crutch or butterfly handle,screwed down, screwed for iron pipe and fixed

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors/fix to wall

All as per item No 38 here-in-before but dia of 75mm

M&L (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement

S&F 110mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door

All as per item No 40 here-in-before but dia of 75mm

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls

S&F 110mm bore PVC (SWR) vent cowl

S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for foundation,etc n.exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil.

Removing excavated materials n exc 50 m and depositing where directed at a level n'exc. 1.5 m above the starting point

M&L for Cement concrete type D2 1:4:8 (using 40mm graded stone aggreages) as in foundations, filling and mass concrete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on steel surfaces of any description over 10cm in width or girth incl. preparation of new surfaces complete all as specified and directed.

S&F 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding complete with tapping screw complete all as specified

All as per item No 52 here-in -before but plain sheet on ridge/gutters

M & L for 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified

M& L machine cut Kota stone slab flooring 20-25 mm thick designer pattern with marble stone as directed by Engr- in -charge over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing over and including 20mm thick screed bed in cement mortar 1:4

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in lintels over 1.5m clear span, cills,steps; seismic and other similar band, copings, covings bed plates, and like including weathering slightly rounded or chamfered angles

S&F mild steel work as in hold fasts and similar articles conforming to Fe.290.Gde-E-165

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil

S & F for powder coated aluminium extruded sections (conforming to IS) (minimum thickness of powder coating 50 micron) three track sliding window shutter with frames comprising series-C (20mm) , duly fitted with neoprene beading, glazing clipss, locking devices, heat absorbing glass 4.8mm thickness (in 2 shutters) and with SS wire cloth of 0.46mm nominal dia of wire and average width of aperature 1.4mm (in one shutter) complete all as specified and directed.

S&F in repair Powder coated Aluminium sections ( conforming to IS) door frames with single/double leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 2 Nos, floor spring 2Nos, Handle 2 Nos in each shutter, Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and as directed (Note:- (i) floor spring measured and paid seperately. (ii) Section of door shutter and frame as per standard manufactures instruction

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats complete all as speci

M & L for Sand filling under floors or in foundations including watering and consolidation

S&F Mild stee bars (TMT bars) 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips.

M&L for formwork to sides & soffits floor or roof beam, lintels, chhajja, shelves, for fair finished surfaces etc complete all as specified.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like all as specified and directed.

M & L for Hardcore of gauge n exc. 63mm, of broken bricks, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface

Excavating in post holes each not exc. 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and depositing where directed

S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quqlity-A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified.

All as per item No 68 above but MS Plates ( plain or chequered)

S&F for brass fasteners 100mm long completed all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint of any tint/shade all as specified.

M&L for Cement concrete Type M-5 E-2 1:5:10 (using 40mm graded agg) 75 mm thick as in sub base complete all as specified.

M&L for 75mm thick plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M & L for Anti termite treatment of the bldg process drilling and injecting chemicals and drilling holes on the junction of wall, drill 12mm bore after injecting chemical in this holes than sealing with cement mortar as per code 6313 part -3 2013 (external and internal of the bldg complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded agg as in foundation.

Form work to sespended slab no exc. 20mm thick for finished serface.

Form work to edge of concreat exc. 5cm and n exc. 10 cm in width for fair finished.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone agg for slab

M&L for PCC 1:2:4 type B1 using 20 mm graded stone agg precast for manhole cover set in CM 1:4

S&F 75 mm CI pipe (spun pipe) fixed to wall

S&F 100 mm CI pipe (spun pipe) in floor

S&F 75 mm CI Cowl

S&F for mild steel work step for sludge chember

M&L for brick work with sub class 'B' bricks old size in one brick Honey Comb walling built in cm 1:4 for 1.5 bk wall complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size in one brick Honey Comb walling built in cm 1:4 for 1.0 bk wall complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries complete all as specified and directed.

M&L for sub base PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in sub sub base/floor etc complete all as specified and directed.

Supply and laying pipe 200 mm (8') bore DI (spun) spigot and socket pipe class K9 suitable for Tyton joint of thickness 6.3 mm prefered 'C' class (C 40) conferming to IS 8329/200 ISI Marked complete all as specified and directed.

S&F Sewage dewatering, submersible pumps, 10 HP, 415V, 2900 RPM, 50 HZ, 3-phase of cutting max solid size up to 25mm, discharge 1500 to 270 LPM on head 12 to 39 meter, pump shaft made of stainless steel with suitable 3 phase starter incl PCC fdn complete all as specified and directed. Make - Kriloskar, cat No- ETERNA 7500 CW 2P or equivalent Make of cosmos pumps or Allas copco

S&F Sewage dewatering, submersible cutting pump 5.5 HP, 415,50 HZ 3-phase.with suitable 3 phase starter incl PCC fdn Make CG cat No STPCS 5.52-20 or equivalent make of Kriloskar and KSB complete all as specified and directed.

S&F fitting for spigot socketed pipes, bends (any radius any angle) tapper any type,(Straight, bend, increasing decreasing double socket etc) Tee pieces single branch. "Y" junction,double branch, crass (all sockets or socket and spigot coller caps and plugs up 200 mm bore complete all as specified and directed.

M & L for Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in 200 mm pipe complete all as specified and directed.

Excavation over area 1.5 Mtr depth and getting out soft/loose soil.

Ditto as per item No 97 but depth exc1.5 M and n exc 3.0 m

Ditto as per item No 97 but exc 3.0m and n exc 4.5 m

Ditto as per item No 97 but exc 4.5 m bur n ecx 6.0 m

Demolition of stone slab and tiles of any description or and thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M & L for plain Cement concrete 1:3:6 type C-2 using 40mm graded stone agg as in drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto for providing fair finished drain channel for Ser item No 4 in above

Taking up or down of 15 mm boresteel tubing and all fittings/ connections, including forfixing Old or New steel tube for following sizes all as specified and directed by Engr-in-Charge

Ditto as per item No 105 but 20mm bore

Ditto as per item No 105 but 25mm bore

Ditto as per item No 105 but 50mm bore

S&F GI pipe 15 mm bore medium grade with all fittings and fixed complete to wall/ceiling or laid in floor /trenches etc. of the following sizes complete all as specified and directed by Engineer-in-Charge (Note - Excavation & earth work shall be measued paid seperately)

Ditto as per item No 109 but 20mm bore

Ditto as per item No 109 but 25mm bore

Ditto as per item No 109 but 50mm bore

Drilling & tapping cast iron water mains in position for branch connection of 20mm bore

S& F 20mm bore GM gate or Globe valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of the following sizes complete all as specified and directed by Engineer-in-Charge

Ditto as per item No 114 but 25mm bore

Ditto as per item No 114 but 50mm bore

Cutting of road (in hard/ dense soil ) for laying pipe line or repair to pipes / lead joints etc .of any size of pipe upto 01 mtr. depth and 0.6 mtr wide and getting out incluiding forming bottom surface to required level and making good the road as per existing all as specified and directed.

Drilling/boaring (horizontally) including also for laying pipe line upto 150 mm /200 mm bore by penumatic tool or horizontal boaring/drilling machine under the existing road (max. 10 mtr. In width) suitable for passing GI/CI/DI tubing complete all as specified and directed.

Supply, installation, testing and commissioning of stainless steel (304 Grade) SCRUB SINK of Size 1200x 570x1395mm with one year warranty against any manufacturing defect all as specified and as directed.

M&L point wiring for one light/fan/exhaust fan point controlled by one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall surfce as existing same colour complete all as specified.

M&L point wiring for one socket outlet point 5 amps on independent board controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified.

M&L point wiring for one socket outlet point 5 amps on same board controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified.

M&L point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly complete all as specified.

S&F Polycarbonate switch piano flush type, SP,5/6 Amps, one way complete all as specified & directed

S&F Polycarbonate switch piano flush type, SP, 16 Amps, one way complete all as specified &directed

S&F Polycarbonate socket out let 2 in 1 socket 5 pin, (6 Amps) flush type controlled by one switch,complete all as specified &directed

S&F Polycarbonate socket out let 6 pin, 16 Amps complete all as specified. & directed

M&L ceiling rose, Pilot 3 Plate ceiling rose 6A,complete all as specified & directed

Supply & fix Air circulator fans 230 volts single phase oscillating 450mm sweep suitable for wall mounting

Supply and fixing exhaust Fan made out of sturdy Engineering 300mm sweep AC 230 Volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded cooper wire of appropriate size including testing complete all as specified.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F plug and socket DBs with Single pole MCBs rated 20 Amps capacity all as specified or equivalent of other make including making niche in wall and mounted flush complete all as specified.

M&L for concealed sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area n green coloure on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered).(Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

S&F epoxy powder coated distribution box Double door type TPN 4 way with 200 amps rated bus bar, 415 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door all as specified and directed.

S&F Isolator TPN, 40/63 Amps , 415 Volts to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each all as specified and directed

S&F MCB SP 6 to 32 Amps C seires , 240 Volts to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each complete all as specified and directed

Supply, fixing, testing and commissioning cables XLPE PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium conductor passing through pipes,on wall, in duct, on poles, in trenches etc. of size 4 core 10 sqmm complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified.

S & F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fixing metal body exhaust Fan 350mm sweep AC 230 Volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded cooper wire of appropriate size including testing complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

Supply, fixing, testing and commissioning cables XLPE PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium conductor passing through pipes,on wall, in duct, on poles, in trenches etc. of size 2 core 10 sqmm complete all as specified and directed.

M&L for sand cushioning for protection of cables complete all as specified and directed.

Supplying & laying common bricks sub class B for LT cable for protection of cable complete all as specified and directed.

M/S S.B. Singh and Sons (BID ID -3313417)

M/s Vimal Traders (BID ID -3313860)

Sanjay Traders (BID ID -3313078)

ARORA BROTHERS (BID ID -3313606)

M/s Vatsh Raj and co (BID ID -3313007)

M K Engineers and Contractors (BID ID -3313505)

M/s Highway Construction (BID ID -3313358)