Repairs and replacement of old asbestos sheets with Galvalume sheets and miscellaneous minor works at Electrical Maintenance

DISMANTLING & REMOVING ::

Demolition of SSM/brick work built in Cement Mortar of any description including removing the debris to a distance exc. 1500 mtrs but not exc. 5000mtrs and depositing where directed.

Demolition of concrete in flooring of any description including dismantling etc icluding disposing the same to a distance of upto 1.50km and complete as directed by Engineer In Charge.

Dismantling of Asbestos cement(corrugated,semicorrugated etc.,) sheets in roof coverings of any condition and on walls at any heights including scaffolding etc., complete.

EARTH WORK ::

Earth Work Excavation over areas not exceeding 1.5m deep in all kinds of soils of soft/hard soils for foundations etc., including clearing of grass,shrubs and getting out.etc., complete and as directed by EIC.

Removing /Transporting surplus excavated earth including debris,vegitationwaste etc to a distance exceeding 250m but not exceeding 500 m and depositing ,spreading and levelling etc., complete and as directed by EIC.

Returning,refilling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms.,in excavated portions,trenches etc complete as directed by EIC.

BRICK WORK ::

Construction of pre cast cement concrete solid block Masonry built in CM (1:4) of cement concrete blocks in walls with necessary scaffolding and curings etc complete

Brick work with table moulded bricks built in cement mortar (1:4) for basement, superstructure etc., at all levels for 11.5 cms thick walls including racking out joints 10mm deep scaffolding, curing etc., complete (Brick conforming to class designation 35 of IS 1077/class B)

PLASTERING & POINTING ::

Providing and laying external Cement Mortat plastering (1:4) at all floors of the existing Building 15mm thick over brick, concrete surfaces, walls and ceilings etc., including scaffolding where ever necessary etc complete.

Cement Mortar (1:6) plastering 15mm thick for internal walls including smooth finishing with lime rendering etc., complete.

CONCRETE::

Supplying, mixing and placing cement concrete (1:2:4) using 20 mm graded granite aggregate including finishing smooth, necessary form work, consolidation, scffolding, curing etc., for plinth, copings,BED BLOCKS etc., complete.

Providing laying RCC (1:2:4) using 20mm graded granite aggregate including necessary consolidation, curing etc., complete for the following. (Formwork & Reinforcement will be paid seperately).

FORM WORK

Providing form work for concrete work with required wooden planks, runners / MS sheet centering, supports, bracings, struts, wedges, bolts, nuts and washers, scaffolding, dressing with oil, temporary opening for stops, chamfered edges internal and external splayed or rounded angles or grooves for forming throating etc., including removing the same from the site after completion of work as directed by EIC.

STEEL & IRON WORK::

Supplying,erecting and fixing Galvalume sheets of 0.5mm thick corrugated of modern pattern approved and standard design with prepainted with approved shade of material to withstand all weather coatings and with standard tensile resistant sheeting material upto 550 MPA of approved make with all necessary screws,bolts self rivetting system to cover roof as well as side cladding to any heights and any type of roof having any pitch/angled slope covered area, including necessary scaffolding,centreing,safety nets etc in compliance with safty parameters etc complete and as direcetd by EIC

Supplying, fabricating and placing reinforcement steel TMT bars including necessary bending,cranking,hooking at the ends cut to length as per design and drawings including binding with mild steel wire (soft drawn) of 0.9mm dia for rods 10mm and and over etc., complete.

Supplying, fabricating, erecting and fixing rolled steel sections such as ISA, square rods,plates, flats etc including necessary cutting, notching, drilling, fitting, rivetted/welding or connecting with bolts and nuts and applying two coats of synthetic enamel paint of approved brand over a coat of red oxide zinc chromite primer etc.,complete for grills with frames of any description as per drawings and as directed by EIC.

TILE WORK: Flooring and walls

Supplying and fixing anti skid ceremic tiles of approved design,size and colour jointed with C.M.(1: 6) and pointed coloured cement to match the tiles including over a screed of C.M.(1: 6) 15mm thick bedding in floors,curing etc., complete all as directed by the EIC etc., complete.

Supplying and Laying 2.0 mm thick PVC Sheet laminated coloured, with approved design and shade mat finished Flooring spread uniformly without undulations and laid with approved rubber based adhesive on the existing floor etc., including cleaning the surfaces and making good the surrounds, curing etc complete.

ALUMINIUM WORK & JOINERY

Supplying fabricating and installing glazed aluminium WINDOWS sliding type triple track(3-Track)( two shutters shall be of glazed with plain glass of 5mm thick and third shutter with SS mosquito proof meshed) with star lock arrangement for shutters frame of anodised aluminium extruded rectangular hollow tubes from high grade H.E 9 W.P alloy conforming to designation 63400 of IS 737 of 'JINDAL', 'INDAL' or other approved equivalent manufacture comprising of the following for the aluminium section of anodisation 15 micron or above for all subsection including mullion,styles,rails and clips and all complete with rubber gasket,beadings etc., to the required size and to fit into the site requirements including filling the gaps/cills with silica gel etc complete and as directed by EIC

Supplying fabricating and installing double track Aluminium ventilators with star lock arrangement for shutters frame of Aluminium rectangular hollow sections from high grade as per approved manufacture comprising of the following for the aluminium section for all subsection including mullion,styles,rails and clips and all complete with rubber gasket,beadings etc., complete and as directed by EIC

Supplying and fixing anodised Aluminimum Tower bolt 200mm

Supplying and fixing anodised Aluminimum Sliding Door bolt 200mm

Supplying and fixing anodised Aluminimum Door Handles 150mm

PAINTING WORK::

Removing completely existing external painting at any height including providing scaffolding where ever necessary etc complete including preparation of surface to receive paint

Painting two coats of enamel paint for existing steel surfaces including preparation of surfaces and a coat of primer including scaffolding wherever needed etc complete.

Painting the exterior surfaces of walls,vertical surfaces/dadoos with two coats of snowcem or other approved equivalent cement paint of approved shade and manufacture including preparation of surface curing, mixing including necessary scaffolding,etc complete.

Painting the interiors surfaces of walls and ceilings with two coats of Plastic emlusion paint over the existing painted surfaces including preparations of old surfaces and one coat of primer etc., complete. including scaffolding wherever needed

Sub - total

Total Amount In Words

NOTE : Rates quoted above are including GST

Signature of Contractor