Repair to 6000 GPH x 150 meter head HC pump at pumping station Jib stage-1st (new).

Amount

Repair to 6000 GPH x 150 meter head HC pump set installed at pumping station Jib stage-1st . The job involves unfastening of pump and motor from base frame, suction and delivery, decoupling of pump from motor. Carriage of damaged pump to road side and then shifting the same to workshop by mechanical transport. Job includes dismantling the pump followed by replacement of damaged shaft by way of extraction of damaged shaft and fabrication, providing, and fitting of new shaft with turning and finishing to the original bearing size alongwith fabrication of key ways. Providing and fitting of impellers-6no. diffusers-5no. Fabrication / fitting of neck ring-6no., sleeves 2 no., gland plate-2no. Providing and fitting of new bearing housing assembly at non driving end. Providing and fitting of bracket 1no. at NDE side, couple pulley set-1no. with bush and couple bolts-8no. Providing and fitting of new bearings as per sample at driving and non-driving end and thereafter shifting of pump from workshop to road side by mechanical transport and then to station by manual carriage, coupling of pump with the motor and making proper leveling and alignment. Testing the pump-motor set on no load and then on full. Complete job includes cost of material skilled / semi skilled / unskilled labour charges, hire charges of tools and tackles, to and fro manual carriage charges between road side and pumping station etc. (Rebate on unserviceable / old parts must be quoted separately)

Vaibhav Engineers and Technocrates

GEETA ENGINEERING MECH WORKS