Carrying out Renovation on civil works in the entire offices in the NPKRR Maaligai and improvement works in the storm water and sewerage system in TNEB Headquarters complex, Chennai -02

Amount

Shifting of all records, Files, Racks, Almirah's, Portable Shelves, Officer's Tables, chairs and furtintures from working area to other location and providing of dust proof screens between the office area and working area, and shifting of all required furnitures, records, files back to the designated place, record / store room after completion of work without damaging the records and furnitures. The files shall be packed using proper bags / Carton box while shifting and transporting. The rate includes the cost of labour, woven PP bags, Carton box, ropes, PP sheets/curtains, fixing charges and cleaning of Adjacent office areas throughout the execution period, etc., complete as per the direction of the Engineer at site. (For entire floor area > 900sq.m)

Providing and laying of 25mm tk screed concrete using12mm HBGS in 1:2:4 ratio. The rate includes the cost of all materials, lead, lift to all floors, labour, etc., complete.

Providing waterproof Expansion joint filler upto 50mm width with fine finished edges for floor using polysulphide sealant GG (Fosroc) for expansion joint of concrete elements, sealing the exposed surface of joint filler with polysulphide sealent to a depth of 20mm after insertion of backing rods, above that covered with rigid special Flat expansion joint in Aluminium profile fixed with neoprene to accomoadate to the tile as per the details, cost including screwing, cost of pads, surface preparation, groving, etc., complete at all leads and all levels inside the building and as per the manufacturer recommendations.

Providing Expansion joint filler upto 50mm width with fine finished edges of roof slabs / ceiling, beam, columns using polysulphide sealant GG (Fosroc) for expansion joint of concrete elements, sealing the exposed surface of joint filler with polysulphide sealent to a depth of 20mm after insertion of backer rods, above covered with 6" special type self adhesive waterproof Aluminium foil/tape profile as per the standards, cost including of all materials, labour, scaffolding, surface preparation, grooving, etc., complete at all leads and all levels inside the building and as per the manufacturer recommendations.

Laying with Vitrified tiles 600X600X8mm over 20mm tk CM 1:3 including dismantling of existing cement mortar floor / tiled flooring and bed of approved quality, brand and design by the engineer at site. The rate includes the cost of all materials, labour, lead, lift, transporting, disposal of debris, etc., complete and as per the direction of the Engineer incharge.

Providing wall panelling using Aluminium frame not less than 63X38X2mm of spacing not greater than 0.60m on both direction with proper clamping and both side rigidly fixed with aligned 12mm thick waterproof / termite proof plywood necessary skirting to provide space for running conduit / cable raceway inside the partition on any direction, provision for alround wooden door frame at required size. The materials are should be as per the direction of the Engineer in-charge. The rate includes the cost of all materials, wastages, labour, lead, lift etc., complete.

Supplying providing & fixing of 1mm thick lamination sheets using proper adhesive to the existing wooden surface. The material, brand, shade, texure are should be as per the direction of the Engineer in-charge. The rate includes the cost of all materials, wastages, labour, lead, lift, etc., complete.

Supplying, providing and fixing of openable type shutters using 19mm tk commercial plywood with both side laminated using necessary fixtures to the existing cupboard with frames. The rate includes the cost of all materials, labour, necessary fixtures, lead, lift, transport etc., complete.

Supplying and fixing of flush door shutter using 35mm tk solid core with commercial ply on both sides with teak wood lipping alround, with top portion fixed with 5mm tk plain float glass and with required aldrop, tower bolts, Mortice lock (Godrej or equivalent), door stopper. The rate includes the cost of all materials, labour, lead, lift etc., complete and as per the dirction of the Engineer incharge.

Supplying and fixing of flush door with teak wood frame of size 100X75mm and shutter using 35mm tk solid core with commercial ply on both sides with teak wood lipping alround, with top portion fixed with 5mm tk plain float glass at top with required aldrop, tower bolts, Mortice lock (Godrej or equivalent), door stopper. The rate includes the cost of all materials, labour, lead, lift etc., complete and as per the dirction of the Engineer incharge.

Supplying, providing and fixing of false ceiling using 8mm tk Calcuim silicate fibre Board Designed and perforated of approved design and patten with necessary GI powder coated L and T sections. The rate includes the cost of all matrials, labour, lead, lift, etc., complete.

Supplying, providing and fixing of false ceiling using 10mm tk GYP Board with required Designed and perforated of approved design and patten with necessary rigid supports. The rate includes the cost of all matrials, labour, lead, lift, etc., complete.

Supplying, providing and fixing of inspection door using 19mm tk waterproof plywood, with teak wood frame to match the existing false ceiling. The rate includes the cost of materials, labour, painting, fixtures of approved design and patten with necessary rigid supports, lead, lift, etc., complete.

Providing 2 coats of varnishing with melamine over application of sealant after through scrapping of wooden surface. The rate includes the cost of all materials, labour, lead, lift, scaffolding etc., complete.

Painting two coats of enamel paint over one coat of primer after through scrapping of old iron surface. The rate includes the cost of all materials, labour, lead, lift scaffolding etc., complete.

Supplying, providing and fixing of anodised aluminium partition partly glazed and partly panelled with 8/9mm thick both side prelamilated boards (Novapan or equivalent) and 5mm tk plain float glass using powder coated aluminium box section 63x38.4x1.6mm for verticals and horizontals including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying, providing and fixing anodised powder coated aluminium door partly glazed and partly panelled with 9 mm thick both side prelaminated boards (Novapan or equivanent) and 5mm thick plain float glass (Modi, Saint Gobin or equivalent) using aluminium box section 47.62X44.45 X 1.82 mm for verticals / horizontals and bottom using 101.6X44.45X2.5mm including the cost of all materials, labour, lead, lift, T&P, etc., complete.

Re-fixing of wooden flush doors with frames for all sizes to the newly required location. The rate includes cost of all labour and new materials such as hinges, aldrop, screws, TW beading, etc., complete

Supplying, providing and fixing of Cast Iron body Hydraulic door closer Size 2 of Everite make (R/L). The rate includes the cost of material at site, labour charges, T&P etc., complete.

Supplying, providing and fixing of Tubular Aluminium body Hydraulic door closer of Dyna/Everite make. The rate includes the cost of material at site, labour charges, T&P etc., complete.

Providing circular hole in RCC structures using core cutting machine for a maximum depth of 450mm in any floor. The rate includes the cost of labour, hire charges for machines, T&P, coring bits, scaffolding, shifting, transporting etc., complete. ( For all floores excluding 10th Floor )

Sizes from 110mm dia upto 170mm dia

Sizes from 32mm dia upto 100mm dia

Providing Polymer Coating for sunken portion of toilet with through cleaning of surface with first coat of polymer modified cementitious slurry and application of second coat after setting of first coat using FOSROC / CHOKSEY OR approved equivalent product and as per the direction of the engineer at site. The rate includes the cost of all materials, labour, lead, lift, etc., complete.

Plastering in cement mortar 1:3, with proper gradient with minimum 20mm depth using waterproofing additives Nitobond SBR (FOSROC) with 100% leak proof layer for sunken portions incl wall surface. The rate includes the cost of all materials, labour, lead, lift labour, scaffolding etc., complete.

Filling and compacting layer by layer with the retrieved brick jelly / recovered brick bats from dismanled brickworks mixed with CM 1:4, to the required depth and gradient / level. The rate includes the cost of all materials, labour, lead, lift, transporting, compaction etc., complete and as per the direction of the Engineer incharge.

Providing PCC 1:4:8, using 20mm HBS, to work in any floor the rate includes the cost of all materials, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge.( For All floors such as Ground floor to 10th Floor)

Providing RCC with compressive strenght M30 , using 12-20mm HBS, the rate includes the cost of all materials, Plasticiser, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge.

Ground floor

At all floor (1st to 10th floor)

Supplying, providing, fabrication, laying and postioning of RTS rods for the reinforcement to all floor levels. The rate includes cost of all materials, labour, lead, lift, transportation, cutting, bending, tying with binding wire, etc., complete and as per the direction of the Engineer incharge.

Providing shuttering / centering to columns, slabs and beams using country wood planks of depth not less than 40mm tk with necessary props and bracing at 1m interval and de-shuttering shall be in accordance with standards at all floor levels. The rate includes the cost of all materials, labour, lead, lift, transportation etc., complete.

Providing 115mm tk Brickwork in CM 1:3 and plastering both sides with CM 1:4, 12mm tk using II cl bricks 230X115X75mm. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.

Providing Brickwork in CM 1:5 using II cl bricks 230X115X75mm. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.

Plastering in cement motar 1:4, 12mm tk over the wall surface. The rate includes the cost of all materials, labour, lead, lift labour, scaffolding etc., complete.

Providing and laying of 50mm tk RCC slabs for counter top with openings for fixing washbasin with reinforcement of 210 kg / cu.m using 12mm HBGS jelly in any floor. The rate includes the cost of all materials, labour, lead, lift, transporting, centering etc., complete and as per the direction of the Engineer incharge.

Flooring with Vitrified tiles 600X600X8mm over 20mm tk waterproofed CM 1:3 bed of approved quality, brand and design by the engineer at site. The rate includes to work at any floor, the cost of all materials, labour, lead, lift, transporting, scaffolding, Nitobond SBR etc., complete and as per the direction of the Engineer incharge.

Supplying, providing and laying of 18 to 20mm tk jet black granite slab with openings for providing table mounted washbasin of approved quality and texure of grains. The rate includes the cost of all materials, nosing of the edges, labour, lead, lift, transportation etc., complete and as per the direction of the Engineer incharge.

Supplying, providing and laying of 18 to 20mm tk jet black granite slab for providing counter top of approved quality and texure of grains. The rate includes the cost of all materials, nosing of the edges, labour, lead, lift, transportation etc., complete and as per the direction of the Engineer incharge.

Supplying, providing and laying of 18 to 20mm tk white marble slab for providing urinal partition of approved quality and texure of grains. The rate includes the cost of all materials, nosing of the edges, labour, lead, lift, transportation etc., complete and as per the direction of the Engineer incharge.

Supplying, providing and laying of 18 to 20mm tk Flamed Ruby Red granite slab for providing counter top of approved quality and texure of grains. The rate includes the cost of all materials, nosing of the edges, labour, lead, lift, transportation etc., complete and as per the direction of the Engineer incharge.

Supplying, providing and laying of 18 to 20mm tk Flamed steel grey granite slab for providing counter top of approved quality and texure of grains. The rate includes the cost of all materials, nosing of the edges, labour, lead, lift, transportation etc., complete and as per the direction of the Engineer incharge.

Dadooing the wall using the 10mm tk vitrified wall tiles of size 4'X2' of approved quality, brand and design by the engineer at site. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.

Removing and refixing of existing urinal partition Marble slabs of in the new location without any damages to new size and polishing, grinding as per the direction of the engineer at site. The rate includes the cost of all labour, polishing, making groves, grouting etc., complete.

Supplying, providing and laying of PVC Pipes, plumbing and sanitary asesssories of approved materials with necessary PVC specials and GI spl clamps in leak proof condtion. The rate includes the cost of all materials required , labour, lead, lift, transport, etc., complete.

160mm dia PVC pipe (6kg / cm2)

110mm dia PVC pipe (6kg / cm2)

90mm dia PVC pipe (10kg / cm2)

75mm dia PVC pipe (10kg / cm2)

50mm dia PVC pipe (10kg / cm2)

32mm dia PVC strainer pipe wrapped with nylon mesh for draining from sunken slabs

CP Angular Push Tap with SS nipple,wall flange (Metro)

100X75mm PVC Nahani / Floor trap with SS grating

110mm PVC vent cowl

PVC health faucet with SS angle valve, SS nipple (metro)

Heavy duty Swing Up SS Grab bar (304 grade ) for dis-abled persons

Supplying, providing and fixing in position of approved UPVC pipes of Schedule 40 at various height and location to withstand high pressure with necessary accessories/fittings by using well fabricated GI slotted base clamp (Heavy Duty frame) of chair depth not less than 150mm and fastern with proper GI clamps using brass screws and the base clamps spacing not greater than 1.2m with good working space between the runs with proper dressing. The rate includes the cost of all approved materials, labour, lead, lift, scaffolding, platforms, PPE's etc., complete and as per the direction of the Engineer at site.

80mm dia UPVC pipes

65mm dia UPVC pipes

50mm dia UPVC pipes

40mm dia UPVC pipes

32mm dia UPVC pipes

25mm dia UPVC pipes

Supplying, providing and Fixing of 50mm dia Brass pressure release valve (spring loaded right angled) with necessary fixtures to the existing water line to supply water with required standard pressure at all floors. The rate includes the cost of all materials required labour, lead, lift, transport, etc., complete.

Supplying, providing and Fixing of approved Gun metal Gate valves of various sizes with necessary fixtures. The rate includes the cost of all materials required labour, lead, lift, transport, scaffolding,etc., complete and as per the direction of the Engineer at site.

80mm dia Gun Metal Gate Valve (Heavy Duty)

65mm dia Gun Metal Gate Valve (Heavy Duty)

50mm dia Gun Metal Gate Valve (Heavy Duty)

40mm dia Gun Metal Gate Valve (Heavy Duty)

32mm dia Gun Metal Gate Valve (Heavy Duty)

25mm dia Gun Metal Gate Valve (Heavy Duty)

Supplying, providing and fixing of white coloured PLUTO P coupled EWC (Hindware#20065) with 3/6 liters capacity flush tank along with SS Health Facet and all internal accessories, SS 2 way angle valve. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of Star S Standard EWC (Hindware) with 3/6 liters capacity flush tank along with SS Health Facet and all internal accessories, SS 2 way angle valve. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of white coloured EWC (Parryware) with 12.5 liters capacity flush tank with PVC Health Facet and all internal accessories, SS angle valve. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of white coloured Cute wall hung wash basin ( not less than 35X26.5 cm) with Flora pillar foam cock, SS coupling with bottle trap with necessary connections (Hindware) with necessary fittings such as bracket, SS angle valve, SS coupling with bottle trap connected to drain, etc. The rate includes the cost of all materials, labour, lead, lift etc., complete. ( For all toilets excluding 10th floor toilets)

Supplying, providing and fixing of Oval shaped counter top (self rimming) washbasin of size not less than 550X410mm (Hindware / Parryware) with long body swan neck tap ,connection hose, SS angle valve, connection hose SS coupling with bottle trap connected to drain. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of white coloured IWC (Parryware) with necessary P or S trap with 110mm dia pipe connection, filled and compacted with brick jelly concrete in the cubicals. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of new magnum Urinal basin (Parryware) with necessary assosories such as, CP push cock, spreader, waste line hose with coupling, connection hose with the existing watersupply. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of FRP doors with frame made out of 5mm thick FRP sheets for panels and door frame of 65X50X3mm thick using FRP sheets with necessary holdfast, tower bolts, hinges and mortice lock. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Flooring with stain free vitrified tiles 600X600X8mm/ designer vitrified tiles for steps/riser and landing area with buttons over 20mm tk CM 1:3 bed of approved quality, brand and design by the engineer at site. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge. ( For Staircase , lobby and 10th Floor Western Wing)

Manufacturing, supplying and fixing of SS Hand rails along the wall for staircase and other locations using 50mm dia 304L grade SS pipe of 1.60mm thick provided with tubular supports made of 304L grade SS pipe of 25mm dia of 1.60mm welded to the railing. The supports has to be grouted to the wall by providing 93mm thick SS circular base plate of 304 grade. The rate shall include for all materials, grouting into concrete with necessary supporting arrangements to the hand rail with polishing, buffing, bonding, cutting, grinding, conveyance, welding charges etc., complete.

Manufacturing, supplying and fixing of SS Hand rails for staircase and other locations using 50mm dia 304L grade SS pipe of 1.60mm thick at required location to height of 900mm from finished floor level welded to 38mm dia SS pipe post of 1.0mm tk as vertical @ 900mm c/c with 2 runs of 25mm dia intermediate horizontal SS pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100X100X6mm MS base plate encased in the base concrete. The rate shall include for all materials, polishing, buffing, bonding, cutting, grinding, conveyance, welding charges etc., complete.

Supplying, fabrication and erection of SS structures using 304L grade for any type of works using combination of SS pipes, bars, flats incl of ornamental pieces. The rate includes the cost of all materials, labour, lead, lift, transportation etc., complete.

Supplying and laying of 15mm tk Tactile paver type of New Tek BT yellow colour ceramic tiles for required width to match the adjacent tiles level over the 20mm tk CM 1:3 bed mortar from ground floor to XI floor. The rate includes the cost of all materials, labour, lead, lift, transporting, polishing / waxing etc., complete.

Dadooing the wall using the ceramic wall tiles using in CM 1:2, 12mm tk after through chipping of walls using approved quality, brand and design by the engineer at site. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.( For Staircase and Lobby)

Dadooing the wall with Designer vitrified tiles over 12 mm tk CM 1:2 plastering after through chipping of walls using approved quality, brand and design by the engineer at site. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.

Supplying, fabricating & erection of Ornamental MS grills for Hand rails in staircase using MS bars & flats, ornamental iron design pieces at all floor levels. The rate includes the cost of materials, labour, lead, lift, scaffoldings etc., complete.

Erection of the dismantled MS grill hand rail with ornamental design and wooden railing at top after laying of slabs in the steps at all floors. The rate includes the cost of all materials, ornamentals, labour, carpentry works, lead, lift, scaffoldings etc., complete.

Refixing of the dismantled wooden hand rail over the newly provided MS grills in the staircase with required new wooden joints to match the existing size and shape. The rate includes the cost of all materials required, labour, lead, lift, scaffolding etc., complete.

Shifting of all furnitures such as tables, chairs, sofa sets, cupboards, racks etc from the eastern wing to the western wing in the same floor and re-arranging of all required furnitures back to the required location without any damage on completion of works. The rate includes all necessary labour required to shift and stacking them properly by covering with dust and water proof covers and re-arrange the same in the required location as per the direction of the engineer at site which includes carpentry & electrical works for removing and refixing of tables, sofa sets., etc. complete. (Consider the working floor area > 780sq.m) ( For 10th Floor Western Wing side)

Dismantling of wooden partitions / Aluminium partitions and disposing the same. The rate includes the cost of labour, lift, lead, transportation, loading and unloading, and devoluting the same to the Ambattur stores.

Dismantling of all type of false ceiling and disposing the debris away from site.The rate includes the cost of labour, lift, lead, transportation, loading and unloading the same.

Dismantling of flooring tiles including bed mortar upto mother slab without distrubing the existing partition and disposing the debris away from site.The rate includes the cost of all labour, lift, lead, transportation, loading and unloading the same away from the site. (For 10th Floor Western Wing)

Brickwork in CM 1:5 using 230mm class II table moulded Bricks including the cost of all materials, labour, lead, lift from GF to 11th floor, curing, transporting, scaffolding etc.., complete and as directed by the Engineer in charge.(For 10th Floor Western Wing)

Providing 115mm tk Brickwork in CM 1:3 and plastering both sides with CM 1:4, 12mm tk using II cl bricks 230X115X75mm. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.(For 10th Floor Western Wing)

Providing circular hole in RCC structures using core cutting machine for a minimum depth of 450mm. The rate includes the cost of labour, hire charges for machines, T&P, coring bits, scaffolding, shifting, transporting etc., complete.(For 10th Floor Western Wing)

Sizes less than 170mm upto 100mm

Sizes less than 100mm upto 32mm

Plastering in cement motar 1:3, with proper gradient with minimum 20mm depth using waterproofing additives Nitobond SBR (FOSROC) with 100% leak proof layer to sunken portions incl wall surface. The rate includes the cost of all materials, labour, lead, lift labour, scaffolding etc., complete.(For 10th Floor Western Wing)

Filling and compacting layer by layer with brick jelly cement concrete with CM 1:4, to the required depth and gradient using 20mm brick jelly. The rate includes the cost of all materials, labour, lead, lift, transporting, compaction etc., complete and as per the direction of the Engineer incharge.(For 10th Floor Western Wing)

Providing PCC 1:3:6, using 20mm HBS, the rate includes the cost of all materials, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge.(For 10th Floor Western Wing)

Providing and laying of 50mm tk RCC slabs for counter top with openings for fixing washbasin with reinforcement of 210 kg / cu.m using 12mm HBGS jelly. The rate includes the cost of all materials, labour, lead, lift, transporting, centering etc., complete and as per the direction of the Engineer incharge.(For 10th Floor Western Wing)

Supplying, providing and laying of PVC / UPVC Pipes, plumbing and sanitary asesssories of approved materials with necessary PVC / UPVC specials. The rate includes the cost of all materials required , labour, lead, lift, transport, etc., complete.(For 10th Floor Western Wing)

160 mm dia PVC Pipe ( 6kg /cm2)

110 mm dia PVC Pipe ( 6kg /cm2)

75 mm dia PVC Pipe ( 6kg /cm2)

32 mm dia UPVC Pipe (shedule 40)

25 mm dia UPVC Pipe (shedule 40)

32mm dia Gun metal valve (Heavy duty)

20/15 mm dia CP Cock

20/15 mm dia two way CP Cock

20/15 mm dia CP angle valve

110/75 Gully trap with SS grill plate

CP shower Arm with overhead shower rose with CP coated angle valve

Supplying, providing and fixing of white coloured Cute wall hung wash basin ( not less than 35X26.5 cm) with Flora pillar foam cock, SS coupling with bottle trap with necessary connections (Hindware) with necessary fittings such as bracket, SS angle valve, SS coupling with bottle trap connected to drain, etc. The rate includes the cost of all materials, labour, lead, lift etc., complete.(For 10th Floor Western Wing)

Supplying, providing and fixing of Round starlet counter top (self rimming) washbasin (Hindware # 10052) with Flora swan neck tap ,connection hose, SS angle valve, connection hose SS coupling with bottle trap connected to drain. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of Star S Standard EWC (Hindware) with 3/6 liters capacity flush tank along with CC two way bib cock with Health Facet and all internal accessories, SS 2 way angle valve. The rate includes the cost of all materials, labour, lead, lift etc., complete.(For 10th Floor Western Wing)

Dadooing the wall using ceramic wall tiles of approved quality, brand and design by the engineer at site. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.(For 10th Floor Western Wing)

Flooring with ceramic tiles 300X300mm over 20mm tk CM 1:3 bed of approved quality, brand and design by the engineer at site. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge.

Providing wall panelling using Aluminium frame not less than 63X38X2mm of spacing not greater than 0.60m on both direction with proper clamping and both side rigidly fixed with aligned 12mm thick waterproof / termite proof plywood and laminated with 1mm thick lamination sheet with necessary skirting to match the existing wall panelling and floor tiles, providing space for running conduit / cable raceway inside the partition on any direction. The material, brand, colour, shade, texure are should be as per the direction of the Engineer in-charge. The rate includes the cost of all materials, wastages, labour, lead, lift etc., complete.

Providing wall panelling over the existing wall using Aluminium frame not less than50X25X2mm of spacing not greater than 0.60m on both direction with proper clamping and rigidly fixed with aligned 12mm thick waterproof / termite proof plywood and laminated with 1mm thick lamination sheet with necessary skirting to match the existing wall panelling and floor tiles, providing space for running conduit / cable raceway inside the partition on any direction. The material, brand, colour, shade, texure are should be as per the direction of the Engineer in-charge. The rate includes the cost of all materials, wastages, labour, lead, lift etc., complete.

Supplying and installation of Anutone / Topakustiks /Idea Tec / Wood fit of acoustic wooden wall panelling with fire retardant grade pine wood fibre slats of size 2430X128X16mm with lineal perforation of 2mm back lined with soundtex black acuostical fleece look, 5 test fire retardant grade with noise reduction coefficient not less than 0.75 NRC to absorb low and mid range frequencies from 125Hz to 4000Hz. GI strut CC 50 frame work not more than 60cm c/c using GI channels fixed on walls, over which an acoustic filling polywool material material sound synth of 500 gsm density of 50mm thick has fixed and finally the panels are fixed and finished, so as to have an neat appearance as directed by the engineer at site. The rate includes the cost of all materials, labour, lead, lift etc complete complying to standard specifications.

Supplying, providing and fixing of 4mm thick Veneer sheets over the existing wooden panelled surface with 2 coats of varnishing over sealant to the required shade, texure and colour. The material, brand, shade, texure are should be as per the direction of the Engineer in-charge. The rate includes the cost of all materials, wastages, labour, lead, lift, etc., complete.

Supplying providing & fixing of 1mm thick lamination sheets using proper adhesive to the existing wooden surface. The material, brand, shade, texure are should be as per the direction of the Engineer in-charge. The rate includes the cost of all materials, wastages, labour, lead, lift, etc., complete.

Supplying and providing of wall mounted storage unit made with 18mm prelaminated paricle board with post formed top and shutters / 5mm float glass and with decks for a depth of 15", lock and key arrangements. The rate includes the cost of all materials, labour, lead, lift transport, etc., complete.

Supplying, providing and fixing of FRP doors with frame made out of 5mm thick FRP sheets for panels and door frame of 65X50X3mm thick using FRP sheets with necessary holdfast, tower bolts, hinges and mortice lock. The rate includes the cost of all materials, labour, lead, lift etc., complete.

Supplying, providing and fixing of noise free exaust fan Havells ventil air DXC 130cm with connection hose to the outlet point. The rate includes the cost of materials, labour, lead, lift etc., complete.

Supplying and fixing of partly glazed using 5mm thick plain glass and partly panelled with flush door with shutter frame (Teak wood) of size 100X35mm with solid core flush door shutter using 35mm tk solid core with 3mm thick OST lamination on both sides with teak wood lipping alround, fixing with required aldrop, tower bolts, Mortice lock, door stopper over the laminated surface. The rate includes the cost of all materials, labour,varnishing, lead, lift etc., complete and as per the direction of the Engineer incharge.

Supplying and providing of modular PVC rigid framed 0.6X0.45m size mirror, designed 0.60m SS towel rod with additional hooks and designed SS soap tray. The rate includes the cost of material, labour for transport and fixing etc., complete.

Disposal of construction wastes, debris away from the site with an initial lead of 25 km to designated place for disposal of the same. The rate includes the cost of labour for loading, unloading, transportation, lead, lift etc., complete.

Removing of the MS Hand rails from the OHT slab /stairs and refixing the same after recasting of roof slab. The rate includes the cost of all labour, MS plates / fastners lead, lift, erection, welding, painting 2 coats enamel etc., complete.

Earth work excavation in all kinds of soils with an intial lead of 10m and lift of 2m. The rate includes shoring, cost of labour, T&P etc., complete.

Providing PCC 1:4:8, using 40mm HBS, to work in any floor the rate includes the cost of all materials, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge. ( For under ground water sump and OHT)

Providing RCC with compressive strenght M30 , using 12-20mm HBS, the rate includes the cost of all materials, Plasticiser, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge.( For under ground water sump and OHT)

Below Ground level for Sump

Eleventh Floor for OHT

Twelfth Floor for OHT

Supplying, providing and fixing of 24"X24" FRP manhole cover with frame of heavy duty in required posistion. The rate includes the cost of all materials, labour, lead, lift etc., complete

Supplying, providing and fixing of PVC molded CI Steps 26X17X2 cm of heavy duty in required posistion by drilling the wall and grouting the same. The rate includes the cost of all materials, labour, lead, lift etc., complete

Replacing of all damaged pressed tiles using new 20mm thick tiles over 20mm tk bed mortar in CM 1:3 mixed with Notobond SBR latex @5 lit/bag and pointing with the same after clean removal of all damaged tiles. The rate to work at XI floor includes cost of all materials, labour, lead, lift, transportation, disposal of debris away from TNEB HQ campus.

Supplying, filling and compacting of M-Sand in the required location. The rate includes the cost of material, labour, lead, lift, compaction etc., complete.

Laying PCC 1:3:6 using 20mm HBGS including cost of all materials, labour, lead, lift etc.,as directed by the Engineer at site.

Providing Brickwork in CM 1:5 using II cl bricks 230X115X75mm. The rate includes the cost of all materials, labour, lead, lift, transporting, scaffolding etc., complete and as per the direction of the Engineer incharge. (For Road and drains)

Providing RCC with compressive strenght M30 , using 12-20mm HBS, the rate includes the cost of all materials, Plasticiser, labour, lead, lift, transporting with curing , T&P etc., complete and as per the direction of the Engineer incharge. (For Road and drains)

Supplying and laying of 25mm tk CC parking tiles in M20 grade with lacquer finishes over 20mm thick in cement mortar 1:3 to the required level and gradiant. The rate includes the cost of materials, labour, lead, lift, etc., complete.(For Road and drains)

Providing and laying heavy duty concrete coloured interlock paver blocks in M40 grade approved design and size of approved make, quality and colour of having 80mm thick laid in required pattern , vibrating the pavers to the required level using vibrators,grouting sand in to the joints and compacting the blocks for its final level includig the cost of all materials ,labour lead,lift,T&P etc. complete and as directed by the Engineeer at site.(For Road and drains)

Supplying, fabrication and erection of MS structural members using approved materials as per the drawing/ instruction provided at site. The rate includes the cost of all materials, labour, lead, lift, machineries with necessary cleat , base plates, angles., etc., complete and as per the direction of the Engineer incharge.(For Road and drains)

Supplying, fabrication and erection / fixing in posistion of MS chequered plates of required thick using approved materials as per the drawing/ instruction provided at site. The rate includes the cost of all materials, labour, lead, lift, machineries with necessary cleat , base plates, angles., etc., complete and as per the direction of the Engineer incharge.(For Road and drains)

Supplying, providing and fixing of SFRC Manhole covers with frame by embedding to concrete slabs. The rate includes the cost of materials, labour, lead, lift etc., complete.

Supplying, providing and laying of Pre- cast RCC slabs of 75mm tk with RTS @ 155 kg/cu.m in M30 grade concrete with necessary circular / slotted holes. The rate includes the cost of all materials, lead, lift, stacking curing, transporting to the requiured location and posistioning, lift etc., complete.

Providing two coats of putty on the old wall surfaces after through scrapping. The rate includes the cost of all materials, labour, lead, lift, scaffolding etc., complete.

Painting two coats of plastic interior Emulsion over one coat of primer after through scrapping of wall surface. The rate includes the cost of all materials, labour, lead, lift, scaffolding etc., complete.

Painting two coats of plastic interior Emulsion over the old plastered surface after through scrapping. The rate includes the cost of all materials, labour, lead, lift, scaffolding etc., complete.

Dismantling of MS hand rails with teak wood top rail for reuse after laying of step tiles for all floors. The rate includes the cost of all labour, lead, lift, stacking, etc., complete.

Dismantling of damaged wooden doors with or without frames and stacking them and devolution to the stores. The rate includes the cost of labour, lift, 20 km lead, transportation, loading and unloading the same.

Dismantling of Aluminium partition and stacking them safely for re-use, the un-useable wooden scraps shall be disposed as per the direction of the engineer at site. The rate includes the cost of labour, lead, lift, stacking, transportation, etc., complete.

Dismantling of brickworks in cement mortar and disposing away from the site. The rate includes the cost of labour, lift, lead etc., complete.

Dismantling of wooden combined table with rack arrangements without any damage and re-assembling of the same in the required location after finishing the floor concept with required pad locks, hinges, handles etc. in complete shape. The rate includes the cost of labour, required materials, lead, stacking, etc complete.

Removing of cuddapah slabs in staircase steps from Ground floor to XI Floor and stacking them for re-use with clean removal of bed mortar. The rate includes the cost of all labour, lead, lift etc., complete.

Dismantling of Mosaic tiles with bed mortar in all floors and disposal of debris away from site. The rate includes the cost of all labour, lead, lift etc., complete.

Dismantling of flooring tiles including bed mortar upto mother slab and disposing the debris away from site.The rate includes the cost of all labour, lift, lead, transportation, loading and unloading the same.

Dismantling of existing Ellis patern / screed finished finished flooring upto mother slab in all floors and disposal of debris away from site. The rate includes the cost of all labour, lead, lift etc., complete.

Chipping of ceramic tiles from flooring & walls and accumulation of the debris in the appropriate location and transportation of debris to the designated area. The rate includes the cost of all labour, lead, lift ,transportation, loading and unloading charges, etc., complete.

Dismantling of IWC including P/S trap, embeded drainage lines, brick jelly concrete and clean removal of the same from each cubical and stacking the debris for disposing away from site. The rate includes cost of all labour, lead, lift, etc., complete.

Dismantling of EWC / Urinals / wash basin including all fixtures and assesories and stacking the debris for disposing away from site. The rate includes cost of all labour, lead, lift, etc., complete.

Dismantling of PCC works and accumulation of the debris in the appropriate location and transportation of debris to the designated area. The rate includes the cost of all labour, lead, lift ,transportation, loading and unloading charges, etc., complete.

Dismantling of RCC works and accumulation of the debris in the appropriate location and transportation of debris to the designated area. The rate includes the cost of all labour, lead, lift ,transportation, loading and unloading charges, etc., complete.

Dismantling and clean removal of brick jelly concrete works, flooring and embedded sewer lines and accumulation and segregation of the re-usable brick bats and debris in the appropriate location and transportation of debris away from site to the designated area. The rate includes the cost of all labour, lead, lift ,transportation, loading and unloading charges, etc., complete.

Dismantling of Rigid pavements upto a depth of 0.20m and disposing the debris away from the site. The rate includes the cost of all labour, machineries, lead, lift etc., complete.

GST for bidders within TamilNadu Note : Bidders within Tamil Nadu shall enter values separately for SGST and CGST and shall enter the value as "Zero" for IGST.

GST for bidders outside TamilNadu Note: Bidders outside Tamil Nadu shall enter value only for IGST and shall enter the value as "Zero" for SGST and CGST .

KONGU CONSTRUCTION AND CONTRACTORS

Bidder Name

Sri Balaji Constructions

KONGU CONSTRUCTION AND CONTRACTORS