BARC/TSD/79/2021-22

Amount

DISMANTLING OLD PLASTER OR SKIRTING carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100m lead.

DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tile up to 25mm etc. complete as directed by Engineer in charge.

DISMANTLING TILE WORK IN FLOORS AND ROOFS laid in cement mortar including stacking material within 100m lead for thickness of tiles above 25mm and up to 40mm.

LEAD CHARGES FOR LEAD EXCEEDING 4 Km NOT EXCEEDING 5 Km, by mechanical transport includinmg loading, unloading, stacking / levelling etc. (Note: The rates in respect of item are applicable for the net quantity arrived at after making deductions for voids at 30% from the corresponding stack/truck measurements).

Providing and constructing BRICK WORK in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge. Brickwork in super structure with standard bricks in C.M 1:4 using crushed sand.

Providing and laying in position CEMENT CONCRETE OF 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels..

Providing 15mm THICK INTERNAL PLASTER as back coat in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.s..

Providing and fixing 1st quality CERAMIC GLAZED WALL TILES conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (Premoulded and Prepolished) machine cut GRANITE OF TELEPHONE BLACK COLOUR FOR KITCHEN PLATFORMS, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.e.

Extra for providing EDGE MOULDING TO 17mm THICK MARBLE STONE / GRANITE SLAB counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge. Granite work.

Providing and fixing GLAZED VITRIFIED FLOOR TILES in floor and dado of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Using Tiles of size 600 X 600 mm

Providing and laying FLOORING PLASTER OF PARIS 8mm THICK OVER NEW LAID TILES including spreading polythene paper, curing, levelling,removal and disposal of same before cleaning floor, labour, tools etc. complete and as directed by Engineer in charge.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area beyond 3.00 Sq.M.

Providing and fixing ANODIZED ALUMINIUM WORK FOR DOORS, WINDOWS, VENTILATORS and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for COLOUR ANODIZING / DYED ANODIZING

Providing and fixing GLAZING IN ALUMINIUM DOORS, WINDOW, VENTILATOR shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-Charge (Cost of snap beading shall be paid in basic item

With Tinted Colour Glass panes of 5.00 mm thickness

Providing and fixing Approved Quality STAIN LESS STEEL BODY ROLLER WHEELS of approved make for Sliding shutters

Providing and fixing Approved Quality and shape STAR LOCKS cum Handle of MIDIN or approved equivalent make for Sliding shutters.

Providng and fixing Aluminium Grill 10 mm thick "DECO GRILLE" make Model No. DG- 202 in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm

Extra for providing ALUMINIUM GRILL 10mm THICK WITH COLOUR ANODISED by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

FILLING THE GAP WITH SILICON SEALANT between aluminium frame & adjacent RCC / Brick work / Stone work over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm widt

DISMANTLING ALUMINIUM / GYPSUM PARTITIONS, DOORS, WINDOWS, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.

Providing and fixing in position SUSPENDED FALSE CEILING SYSTEM / PARTITION SYSTEM USING CALCIUM SILICATE BOARDS (HILUX CEILING SYSTEMS) 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment)

12mm THICK CALCIUM SILICATE BOARDS (HILUX CEILING SYSTEMS)

Providing and Fixing 'LUXALON' ALUMINIUM CELL CEILING manufactured by M/s. Sqm Hunder Douglas India Pvt Ltd. of approved colour consisting of Main runner, Upper sections, Lower sections all of U- Shaped Profiles 10 mm wide x 50 mm deep x 0.50 mm thick with inwardly returned edges of 2.50 mm. Coil coated on a Continuous paint line, Diuble baked and Roll formed from enamelled corrosion resistance Aluminium alloy ( Al. Mg alloy) for higher strength andRoll forming characteristics.The main runner shall be fixed at a distance of 1.20 metres centre to centre and shall be suspended by means of G.I Suspension Rod 4mm diameter and a galvanised suspension spring clip at a distance of 1.20 metres centre to centre. The cross - Runner shall be fixed to the Main Runner at a distance 0.60 mts c/c. with a self locking device. The Upper Section and Lower section shall be fixed to main runner and cross Runner in form of a Cell Structure of module 100 mm X 100 mm with self Locking device. Grid system for fixing ceiling tiles shall comprise of TEEs. The 24mm main Tee runers shall be suspended at an interval of 1200mm centre to centre. The 24 mm cross tee runner shall be suspended at an interval of 600mm centre to centre and further supported with 24mm cross Tee with interlocking arrangements to form a Grid of 600mm x 600m. The main TEE shall be supported by means of 4mm G.I.Rod from slab / Roof. The suspension shall be provided at 1200 to 1500mm centre to centre.provision for Lights, Diffusers Etc to be made including extra supports wherever necessary. A Non - Woven felt made of glass reinforced fibre glued oner the Perforation for Sound absorbtion Measurements shall be as per actual area of False ceiling with out deductions for lights and diffusers. Measurements shall be area covered by the Cell False ceiling .

DISMANTLING C.I. PIPES of 75 mm Dia to 200 mm Dia including excavation, taking out the pipes manually / by mechanical means, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge

Providing and fixing DOUBLE TUBULAR SCAFFOLDING SYSTEM using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

Providing and applying ONE COAT OF CEMENT PRIMER of approved brand on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by Engineer-in-charge

Providing, applying wall painting two coats on old work with premium PLASTIC EMULSION PAINT of approved brand to give an even shade without cement primer, including preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge

R K Construction

ROSHAN ENTERPRISES