Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹30.4 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹31.0 L+₹39,644 (1.30%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹32.9 L+₹2.3 L (7.50%)Rejected-Finance | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹34.7 L+₹4.1 L (13.3%)Rejected-Finance | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹45.6 L+₹15.0 L (49.2%)Rejected-Finance PLOT NO 32 FF SHIVAJI ENCLAVE NEW DELHI 110027 | NEW DELHI | NEW DELHI | DELHI | 110027 | L-5 | Rejected-Finance L-5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
15 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) FARIDABAD
GE (AF) FARIDABAD
COMPREHENSIVE MAINTENANCE TO CERTAIN MD ACCN, MESSES, BILLETS ETC AND OTHER ALLIED WORKS AT AF STN FARIDABAD IN AOR OF GE (AF) FARIDABAD
2024_MES_642742_1
GE (FBD)/AF-48/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Faridabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) FARIDABAD
₹80,000
Yes
9 Apr 2024
16 Feb 2024
18 Mar 2024
16 Feb 2024
15 Mar 2024
1 Mar 2024
16 Feb 2024 - 23 Feb 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris to outside the station where suitable for contractor complete all as specified and as directed by Engineer-in-Charge
Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed by Engineer-in-Charge
M&L for 15mm thick terrazo topping with 7 to 10 mm size marble aggregate with grey cement and not pigment including grinding and polishing as in vertical surfaces as in dado external wall complete all as specified and as directed by Engineer-in-Charge
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed by Engineer-in-Charge. Note : Payment for providing grooves shall be made separately.
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed by Engineer-in-Charge
Taking down chowket or frame with shutter (without taking of shutter from frame) not exc 1.50 Sqm each complete all as specified and as directed by Engineer-in-Charge
Taking down chowket or frame with shutter (without taking of shutter from frame) exc 1.5 sqm but not exe 4.00 Sq m each each complete all as specified and as directed by Engineer-in-Charge
Providing and fixing factory made uPVC white color Sliding window three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm). sliding sash (42mm x 67mm). sliding sash (42mm x 67mm) Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mm x 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), Stainless steel wire cloth nominal dia of wire and average width of aperture 1.40 mm dia and required accessories complete all as specified and as directed by Engineer-in-Charge Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm each, (B) Area exceeding 2.00 Sqm each
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and complete all as specified and as directed by Engineer-in-Charge
Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and complete all as specified and as directed by Engineer-in-Charge
M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge
M&L Providing plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates, 25mm thick, as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes complete all as specified and as directed by Engineer-in-Charge
M&L Providing screed bed or bedding layer, 15 mm thick, in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge
M&L for Glazed ceramic tiles, 300/350 x 450 x 7mm thick, glossy finish, conforming to Group B-III of IS-13712, first quality, of approved colour, laid on vertical surfaces such as skirting or dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge
Rendering, 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and as directed by Engineer-in-Charge
Demolition of existing roof treatment (including pcc , plaster / brick tiles, mud etc) of any description and thickness upto roof slab on roof top including flashing and junction of parapet repair and disposal of debris to outside the station where suitable for contractor complete all as specified and as directed by Engineer-in-Charge
M&L for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even complete all as specified and as directed by Engineer-in-Charge Note : WPC shall be measured and paid separately.
M&L for APP based modified pre fabricated five layer, 3 mm thick and weighing not less than 3 Kg per Sqm water proofing membrane reinforced with non woven polyester mat 160 G Smith black finished over compatible primer conforming to IS-3488 @ 0.3 LT/Sqm, membrane laid by torch application side over lap of 75 mm and end overlap of 100 mm wide, joint/overlap sealed with torch applications for parapet etc the membrane taken up to 30 cm and then inserted inside the parapet after making necessary groove as required after necessary preparation of the surface comlete as per manufacturer's instruction complete all as specified and as directed by Engineer-in-Charge
M&L for for two coat of aluminium paint over the roof ( APP membrane) complete all as specified and as directed by Engineer-in-Charge
Taking up or down steel tubing with connections complete of bore 20mm, complete all as specified and as directed by Engineer-in-Charge
S&F 20 mm bore ,UPVC high grade , including all fittings (like Elbow , Tee, Socket, Gi pipe connecter, nipples, tank connector etc) and fixing solutions/adhesive or chemicals and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and as directed by Engineer-in-Charge
20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer-in-Charge
Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer-in-Charge
M&L for 25cmx25cmx25mm thick machine pressed, set jointed and pointed in neat cement slurry with grey cement and no pigment as in floors and cut and polished complete all as specified and as directed by Engineer-in-Charge
S&F in repais solid PVC wall lining/cladding consisting of 5mm thick plain colour sheet single side prelam inclusive of solvent cement and fixing at site on pvc frame complete all as specified and as directed by Engineer-in-Charge
S&F in repais 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make pvc frame complete all as specified and as directed by Engineer-in-Charge
M& L for Providing precast cement concrete louvres and jallies, 25mm thick using type B-0 1:2:4(12.5mm graded agg) setting in cement mortar 1:4 (mea sured solid), in?cluding all mould- ings but excluding frame complete all as specified and as directed by Engineer-in-Charge Note : Pre cast frame shall be measured separately and paid for under item 04032.
S&F in repairs providing PVDF aluminium copmposite panels with fire resistent mineral filled core material shall consist of following :- (i) A;luminium sheet making a total panel thickness of 6mm with outer surfaces finished with PVDF based coating 0.25mm, inner surfaces finished withj a thin coat of polyster paint. The cleaness of aluminium cover sheet shall be0.50mm inner core shall be of LDPE.(ii)Aluminium framing of section 25mmx50mmx1.5mm thick.(iii) Aluminium grid shall not be exceed 1.0 sqm each the aluminium grid not more than 1m c/c shall be fixed with MS angle 30x30x5mm projected 150mm from surface of wall.(iv) Colour shall be approved by GE.(v) Joint shall be sealed with help of masking tapes complete all as specified and as directed by Engineer-in-Charge Note :- Canopy, boards,projection etc will be mesured in sqm for payment puirpose.
Dismantling wall and ceiling boards(fibre, pulp,insulation etc) of insulation board/slab/blankets, any thickness, including cover fillets etc complete all as specified and as directed by Engineer-in-Charge
S&F Anodised aluminium snap grid frame of size of grid 605x605mm work for false ceiling complete all as specified and as directed by Engineer-in-Charge
S&F hangers 6mm dia G.I(upto 1200mm length ) adjustable level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and spansion hold fasterner 12.5mm dia 40mm long complete all as specified and as directed by Engineer-in-Charge
M&L for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suiytably placed in false ceiling grid maded of Aluminium/G.I/M.S as per specification and drawing complete all as specified and as directed by Engineer-in-Charge
MAHABIR SINGH
laxmi enterprises
BS CONSTRUCTION
Singh Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .