PERIODICAL SERVICES, SMART PERIODICAL AND MISC EXTERNAL B/R WORKS FOR CERTAIN BLDG IN CAMP AREA UNDER GE (AF) PALAM, DELHI CANTT-10

Amount

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), surface finished even and fair with water proofing compound by weight as per manufacturer's instructions with and including necessary scaffolding up to (G+3 storey) complete all as specified and as directed.

M & L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, slab, chhaja, pardi, railing etc, cleaning thoroughly exposed reinforcement, applying one coat of anti corrosive paint to the exposed reinforcement, and two coat plaster 35 mm thick (20 mm + 15 mm) on rough concrete surfaces of fin, facia, chhajja and similar article in CM (1:3) surface finished even and smooth without using extra cement in any height including necessary scaffolding complete all as specified and as directed. Note :- (a) Two coats plaster shall be carried out as mentioned in clause of SSR- Part-I finished. (b) Removing the debris outside MD land (c) Material and labour for necessary scaffolding and formwork (G+3 storeys) and safety arrangement complete all as specified and directed. (d) The finish of the surfaces shall be matched with the existing surface.

M & L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, slab, chhajja, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size (100 x 100) mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar (1:3), average 30mm to 50mm thickness and thereafter rendering 10 mm thick plaster in cement mortar (1:3), mixed with water proofing compound @2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and formwork (G+3 storeys) and safety arrangement for guniting work complete all as specified and as directed. Note:- The finish of the surfaces shall be matched with the existing surface. WPC shall be measured & paid separately under respective item as supply only.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending separately for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F 5 to 10 mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, as in strrrups and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Supply only Integral Water Proofing compound complete all as directed.

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.

M&L for preparing old surfaces on ceilings including brooming down by mechanicaly, scraping down and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying 3 mm average thick cement based wall care putty with and including a coat of alkalic resistant primer and two coats of oil bound distemper up to double storey building complete all as specified and as directed.

Complete removal of existing treatment from external surfaces of walls & ceilings by mechanically and washing, rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of (1:3) to obtain smooth regular/even finish using sand paper with and including 3 mm average thickness cement based wall care putty over a coat of alkalic resistant primer and two coats of oil bound distemper, in wall etc. complete all as specified and as directed.

M&L for preparation of new plaster surface of walls, chajjas, soffits & beam including necessary scaffolding and applying 3 mm average thick cement based wall care putty with two coats of acrylic smooth exterior paint of required shade 1.43 ltr/10sqm over a coat of exterior primer 2.20kg/sqm complete all as per manufacturers instructions complete all as specified and as directed.

M&L for complete removal of existing surface of walls,chajjas, soffits & beam including necessary scaffolding and applying 3 mm average thickness cement based wall care putty with two coats of acrylic smooth exterior paint of required shade 1.43 ltr/10sqm over a coat of exterior primer 2.20kg/sqm complete all as per manufacturers instructions complete all as specified and as directed.

M&L for prepration of old decorated plastered surfaces of walls /ceilings, removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil emulsion distemper white or coloured complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls/ceilings by removal of nails etc & filling cracks/hole with putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper white or coloured by roller complete all as specified and as directed by Engineer-in-Charge.

M&L for applying 1mm thick cement base wall care putty on wall complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge. Note:- The work shall be carried out upto four storey building. Necessay scafolding upto four storey buildings shall be deemed to be included in unit rates.

M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying two coats of cement base paint complete all as specified and as directed by Engineer-in-Charge. Note:- The work shall be carried out upto four storey. Necessay scafolding upto four storey bldg shall be deemed to be included in unit rates.

M&L for preparation of plastered or un plastered old decorated surfaces of walls removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of exterior emulsion paint 100% acrilic of approved white or coloured complete all as specified and as directed by Engineer-in-Charge. Note:- The work shall be carried out upto four storey. Necessay scafolding upto four storey bldg shall be deemed to be included in unit rates.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Material and labour for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in charge. Note for item No 11 to 26 :(i) Shade of the paint shall be approved by GE/Engineer-in-Charge. (ii) Complete work shall be strictly executed by mechanical means / tools / machines required for smart periodicals i.e. vacuume based sanding machine, mechanical mixer, grinder and rollers etc and the cost of T&P required shall be borne by contractor & included in this item (ii) Removing /cleaning of painting matarial from floor /wall tiles etc shall be borne by the contractor & included in this item.

M&L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages:- Stage 1: Providing 15mm thick plaster in CM (1:3) mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :- (i) Mode of measurement shall be actual area treated (floor and adjoining walls).

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thicknes in floors, aprons etc complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n. exc. 0.11sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300x200)mm x7mm thick/ (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.

Taking down AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified.

Description all as per ser item No. 31.00 above but 75/80 mm dia pipes complete all as specified and as directed.

Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

S&F for PVC (SWR) bends of radius suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.

S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to floor/ walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F for 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls/floor etc with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and as directed.

S&F for CI 100mm bends with door complete all as specified and as directed.

S&F cast iron floor trap 75 mm dia out let with grating incuding jointing to waste pipe fixed in cement concrete type B1 (1:2:4) of size 100 mm including jointing with solvent cement complete all as specified and as directed.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed.

Taking up or down 15 to 25 mm steel tubing and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

S&F tubes, medium gade 15mm dia, galvanized with all fittings and fixed complete to walls and ceiling or laid in foors as in concealed type complete all as specified and as directed.

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for GI tubing, 25mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Disconnecting existing water tank of any description 500 litres but n.exc 1000 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position complete all as specified and directed by Engineer-in-charge.

Dismantling water tanks exc 250 ltr & n exc 500 ltr capacity and removing to store complete all as specified and as directed.

S&F 500 ltr rotational moulded polyethylene water storage tanks three layered white in colour (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.

S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F gunmetal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F gunmetal globe or gate valves,25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless syphonic action type flushing cistern (Economy dual flush) low level, white, with inlet, ball valve, float and handle including brackets and Brass CP flush pipe long bend complete all as specified and as directed.

S&F in repair WC Orissa pattern white with integral foot rest (580x440)mm including trap set, PCC bed and making good disturbed floor connecting to flush pipe complete all as specified and as directed.

S&F in repairs 15 mm dia long body bib taps fancy type cast copper alloy chromium plated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S& F in repairs 15 mm dia type pillar taps swan neck fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm bore CP angular valve (fancy type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

S & F in repairs 15mm bore concealed stop cock long shank and long threading chromium plated of screwed down to iron pipes, high pressure complete all as specified and as directed.

S&F CI 100mm single branch piece with door complete all as specified and as directed.

S&F for CI 75mm bends with door complete all as specified and as directed.

S&F for cast iron cowls 100 mm size complete all as specified and as directed.

Supply and fixing in repairs, salt glazed stone ware gulley traps (150x150)mm size square mouthed type ‘P’ including CI cover complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs 1mm thick stainless steel plate rack of overall size 600 mmx900 mm and weight not less than 6 Kgs as approved complete all as specified and directed.

M&L for cutting holes in brick walls exc half brick but not exc one brick in mud mortar for inserting holdfasts and making good dismantled portion in cement concrete (1:2:4) type B-1 including material and labour upto (G+3) storey and necessary scaffolding and safety arrangement complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each and removing from site and making good the disturbed protion in CM (1:3) or PCC (1: 2:4) type B1 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) but exceeding 1.5 Sqm and not exc 4.00 Sqm each and removing from site and making good the disturbed protion in CM (1:3) or PCC (1: 2:4) type B1 complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Demolition of cement concrete/terrazzo (unreinforced) of any description in ground floor and paving n.exc 15cm thickness (below or above ground level) including removing the rubbish/debris out side defence land complete all as specified and as directed by Engineer-in-Charge.

M&L pressed steel frame 1.25 mm thick of size (105 x 60)mm for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, hold fast etc complete all as specified with and including filling hollow portion with PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

M&L pressed steel frame 1.25 mm thick of size (125 x 60)mm for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, hold fast etc complete all as specified with and including filling hollow portion with PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered heads for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.

S&F 35 mm factory made plain frame panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commecial ply or 12 mm veeneered particle board with commercial veeneering on both faces. The size of both rail and stile as per SI-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F window/Ventilator section of frame (72 x 55)mm fixed to wall or concrete surface with MS hold fast (30 x 5) mm section, 150 mm long made of galvaniszed steel powder coated and section of shutter (47 x 20)mm, mulion section (72 x 50)mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter (Double door shutter) with total coated thickness of 0.60 mm including powder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5) mm fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F solid PVC door Frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F PVC flush door solid panel fency type both side with teak wood finish 30mm thick consisting of panel of hollow PVC profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontlly inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollw profile section using 3mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. complete as per direction of Engineer-in-Charge, maufacturer's specification and drawing.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet Polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete as per direction of Engineer-in-Charge, maufacturer's specification and drawing.

M&L for cement concrete (1:2:4) type B-1 (using 12.5mm graded stone aggregate) for fixing of hold fasts and clamps etc complete all as specified and as directed.

S&F clamps; hold fast; bands, straps, supports or stays for galvanised plain mild steel wire including bolts, rainwater, ventilating pipe and simillar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.

S&F aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps when open in 30mm complete all as specified and as directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.

M&L for 18/19 mm thick preleminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework including 10 mm thick IInd class H.W lipping all round as in shelves of design as approved by Engineer -in- charge. etc with and including dismantling boarding any description fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F sheet glass 3 mm thick ordinary quality fixing to steel/aluminium window shutters in any position with new beads/ steel section as required for securing complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repair 25 mm dia aluminium Drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for granite (18-20)mm thick work in counter for cooking & W.H.B platform including rounding and grinding of edges and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite including cutting for hole, rounding of edges and mirror polishing complete all as specified and as directed. Note:-(a) Rates also includes in this item for necessary raking, circular cutting or notching and waste on Granite. (b) This item shall be used for W.H.B Counter top /cooking platfom/ Counter top etc.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

SURESH KUMAR SHARMA & CO (BID ID -3305502)

M/S Parshant Associates (BID ID -3317590)

DEV CONSTRUCTION (BID ID -3306429)

L G BUILDERS (BID ID -3306207)

M/s Navansh Engineers & Consultants (BID ID -3306349)

M/S VERMA BUILDER (BID ID -3305821)

JAIPAL AND BROTHERS (BID ID -3303902)

RAM KARAN GOEL (BID ID -3306466)

RK TRADERS (BID ID -3306460)