REPAIR TO WALL, PLASTER, FLOORING AND OTHER MISC

Amount

Demolition of cement concrete (unreinforced) of any description not other specifically provided for etc and removal of debris to a distance not exc 50 mts and depositing where directed at a level n exc. 1.5 m above the starting point.

Demolition of wall and ceiling boards any thickness of any description including cover fillets complete all as specified and directed.

S&F in position suspended false ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 0.3mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) fibre cement E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips including preparation of surfaces and appling two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

M & L for Pre-cast cement concrete block masonry Type C-1 M-10 (using 20mm graded crushed stone aggregate ) exc 10cm in width and setting in CM 1:4 Complete all as specified and diercted.

M & L for 75 mm thick plain cement concrete M-10, type C-1, using 20 mm graded stone aggregate) as in plinth protection, path etc laid in alternate bays not exc 3 m in length, and finishing the surface even and fair without using extra cement all as specified and directed.

M & L for 75 mm thick PCC M-7.5, type D-2 as in sub-base using 40 mm graded crushed stone aggregate .

M & L for 40 mm thick plain cement concrete M-15. type B-1 (using 20mm graded crushed stone aggregate) as in floor including finishing top even & smooth without using extra cement.

M & L for 10 mm thick rendering in CM 1:6 on brick work or concrete surfaces including finishing plaster surface even and smooth without using extra cement all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on brick or concrete surface including finishing plaster surface even and smooth without using extra cement all as specified and directed.

Preparation of newly plastered surface of walls and applying three coats of white wash complete all as directed.

Preparation of newly plastered wall surface and applying two coats of cement base paint complete all as directed.

Preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant & primer complete all as directed.

Preparation of old decorative plastered surface of walls and applying one coat of cement base paint all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4, type B0 (using 12.5mm graded agg) as in flooring etc finished even and smooth w/o using extra cement.

M & L for non - skid coloured ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors and including 15mm thick screed bed or bedding layer of CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Vitrified Ceramic tiles 10 mm thick (square/rectangular), dark shade, polished, area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors and including 15mm thick screed bed or bedding layer of CM (1:6)etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and including 15mm thick screed bed or bedding layer of CM (1:6) etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L for 20 mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing

M & L Coloured glazed ceramic tiles of size 300 x 200 x 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match,and including 15mm thick screed bed or bedding layer of CM (1:4) complete all as specified and directed.

Resecuring or easing and adjusting door shutters of size exc 1 sq m and not exc 2 sq m each of any description without taking down shutter from frame complete all as directed.

S & F in repair 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section fixed complete all as directed.

S & F in repair 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section fixed complete all as directed.

S & F in repair 150 mm size extruded aluminium alloy handle, (ISI marked) fabricated type anodised fixed complete all as directed.

S & F in repairs 250 mm long aluminium alloy, anodised, sliding door bolt (ISI marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed.

S & F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms).

S & F in repair door closer hydraulically regulated, cast iron body designation No. 2 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight not more than 36 to 60 kg and fixed.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F in repairs 18 mm to 20 mm dia curtain rod/rail, anodised aluminium alloy, chromium plated with & including fixing brackets, stops etc complete all as specified and directed.

S & F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or stainless steel wire staples including etc complete all as specified and

Hacking out old broken glass (any thickness) and size from metal frame glazed with putty or fixed with wooden beads and removal of debris to a distance n.exc 100 mtr and depositing where directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as directed.

S & F in repair rotational moulded High Density PolyEthylene water storage tanks of capacity 500 litre and conforming to IS, hoisted and fixed in position and removing to store as specified and directed.

S & F in repair rotational moulded High Density Poly-Ethylene water storage tanks of capacity 1000 litre and conforming to IS, hoisted and fixed in positionand removing to store as specified and directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete.

S & F in repair ball valves suitable for 15 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed. (minimum weight 210 gms)

S & F in repair ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed. (minimum weight 210 gms)

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors.

Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime

Supply & fixed in repair, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device.

S & F,in repair Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets.

Supply & fixed in repair, Stainless steel sink, 1.0 mm thick for kitchen or lab, with plug, waste pipe, washers, incl cantilever cast iron brackets, connecting union etc overall size 495 x 420 mm with bowl size 410 x 330 x 160 mm.

Supply & fixed in repair, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe).

S & F in repairs CP stop valves suitable for 15 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions.

S & F in repairs CP stop valves suitable for 20 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions.

S & F in repairs CP bib taps, brass chromium plated, fancy type, screwed down, screwed suitable for 15 mm iron pipe or for brass ferrule and fixed.

S & F in repairs brass CP pillar taps, 15 mm, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts.

S & F in repairs plastic water closet seat, white coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F in repairs PVC flexible waste pipe, 40 mm dia, suitable for WHBs including threaded PVC socket suitable for shank of waste coupling.

S & F in repairs PVC flexible waste pipe, 40 mm dia, suitable for Urinals including threaded PVC socket suitable for shank of waste coupling

m/S Varun Gupta

M/s Joginder Paul Bhatia