PROVN OF VEH PARKING SHED FOR 04 X FOUR WHEELERS AND 20 X TWO WHEELERS NEAR MAIN GATE OF 114 BN (TA) JAT AT FATEHGARH

Amount

Site Clearance in soft/loose soil and removing surplus soil and making good surface complete all as specified and directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde E- 250) quality A ) complete all as specified and directed

S&F Mild steel screw bolts16mm dia and 10cm long (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square complete all specified and directed

M&L for Excavating over areas , n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

M&L Plain Cement concrete type D2(1:4:8) , 40mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius with mortar 1:6 including complete all as specified and directed

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for Reinforced Cement concrete (Design mix M-25) (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. and mass concrete complete all as specified and directed

M&L for M-25 as in column complete all as specified and directed.

M&L for Reinforced Cement concrete (Design mix M-25) (20 mm graded aggregate) in Roof Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed

M & L for form work as in sides of columns etc complete all as specified and directed.

M & L for form work as in roof beams,sides of suspended slabs etc complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation of steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Surface dressing n exc 15 cm deep complete all as specified and directed

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 18 cm deep and getting out complete all as specified and directed

M&L Hardcore (broken stone) of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L 75mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) for sub base of flooring complete all as specified and directed

M&L 75mm thick Cement concrete type B-2 , 1:2:4 (40 mm graded aggregate) finishing cement concrete surface without using extra cement even and smooth including necessary form work complete all as specified and directed.

Forming 12mm thick expansion joint filled with pre formed bituminus filler and top 30mm primed and sealed with sealing compound grade B for 75 mm thickness of concrete complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for surface excavation n. Exc. 30 cm deep and avg 15 cm deep and getting out soft and loose soil complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade in floors with grey pigment and cement complete all as specified and directed

M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggt) as in kerb stone, coping and all other siilar works including necessary formwork etc complete all as specified and directed

Removing Excavated material n. Exc. 50m and depositing where directed at a level n. Exc. 1.5m above the starting point etc complete all as specified and directed.

M/S Shree Gopal Engineers & Contractor

m/s udit constructions