PROVN GUARD RESTROOM WITH ATTACHED TOILET AND BATHROOM FOR SECURITY GUARDS AT SP-7 OF RIF UNDER GE (S) JAIPUR

Amount

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil. Complete all as specified and as directed by Engr-in-Charge. Building Work: 60 Sewage Disposal: 25 Water Supply: 60.75 EM: 11

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate. Complete all as specified and as directed by Engr-in-Charge. Building Work: 9 Sewage Disposal: 2

M&L brickwork with subclass `B' bricks, straight/curved on plan exc 6m mean radius, built in CM (1:6). Complete all as specified and as directed by Engr-in-Charge. Building Work: 80 Sewage Disposal: 5

M&L RCC M-25 design mix in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate. Complete all as specified and as directed by Engr-in-Charge.

M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves and the like. Complete all as specified and as directed by Engr-in-Charge.

M&L RCC M-25 design mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete. Complete all as specified and as directed by Engr-in-Charge.

M&L RCC M-25 design mix in Beams, cantilevers, bressummers, lintels over 1.5m span. Complete all as specified and as directed by Engr-in-Charge.

M&L Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);supplied and fitted to chowkats. Complete all as specified and as directed by Engr-in-Charge.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. Complete all as specified and as directed by Engr-in-Charge.

All as per item above but for 6mm to 8 mm dia

All as per item above but 5mm dia and over upto and including10mm dia in stirrups, spacers and binders

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat. Complete all as specified and as directed by Engr-in-Charge.

Fomwork to sides of pillar, posts, struds, piers etc. Complete all as specified and as directed by Engr-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter. Complete all as specified and as directed by Engr-in-Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6). Complete all as specified and as directed by Engr-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete. Complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6). Complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling. Complete all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. Complete all as specified and as directed by Engr-in-Charge. Building Work: 25 Sewage Disposal: 12.50 Water Supply: 59.75 EM: 7

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point. Complete all as specified and as directed by Engr-in-Charge. Building Work: 35 Sewage Disposal: 15 Water Supply: 1 EM: 4

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6). Complete all as specified and as directed by Engr-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surfaces 300x200mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick plaster in CM 1:4. Complete all as specified and as directed by Engr-in-Charge.

Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (b) after drying one coat of roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 5 years shall be submitted by the contractor

M&L Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface.

M&L Applying three coats of white wash on new Ceiling surface including preparation of surface.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls. Complete all as specified and as directed by Engr-in-Charge.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel. Complete all as specified and as directed by Engr-in-Charge.

S&F Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars & similar work conforming to Fe 410-0 or Fe 310-0

M&L MS angle iron door frame 40x40x6mm confirming to Fe-310-0 incl.10mm dia deformed bar for strengthening at bottom of chowkhat. Complete all as specified and as directed by Engr-in-Charge.

M&L hold fast 25x3mm welded to angle iron door frame with nut & bolt / welded to frame conforming to Fe-290 Gde-E-165. Complete all as specified and as directed by Engr-in-Charge.

S&F Steel windows with side hung shutters incl. projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded. Complete all as specified and as directed by Engr-in-Charge.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane. Complete all as specified and as directed by Engr-in-Charge.

S&F Plain framed, panelled shutter 35mm thick (two panel)with lock rail & panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. 2nd Class HW rail & style of size as per IS:1003 (Part I), kiln seasoned & chemically pressure treated. Complete all as specified and as directed by Engr-in-Charge.

S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate. Complete all as specified and as directed by Engr-in-Charge.

S&F Mild steel barrel tower blots 150mm long, stove enamelled black, with bright bolt. Complete all as specified and as directed by Engr-in-Charge.

S&F Mild steel pressed handles 125mm size, oval type,stove enamelled black. Complete all as specified and as directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples. Complete all as specified and as directed by Engr-in-Charge.

M&L Machine cut kota stone slab 20-25mm thick over cement screed 15mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing. Complete all as specified and as directed by Engr-in-Charge.

M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome. Complete all as specified and as directed by Engr-in-Charge.

M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer. Complete all as specified and as directed by Engr-in-Charge.

M&L Sand Filling under floors including spreading,watering and levelling in layers n exc. 25 cm thick . Complete all as specified and as directed by Engr-in-Charge.

M&L plain cement concrete type C-2, 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar. Complete all as specified and as directed by Engr-in-Charge.

M&L for Damp proof course to horizontal or vertical surfaces including necessary formwork in cement conc 1:2:4 type B-0 40 mm thick with Water Proofing Compound. Complete all as specified and as directed by Engr-in-Charge.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing. Complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Complete all as specified and as directed by Engr-in-Charge.

S&F steel ventilators with top hung shutter including hinges,steel peg stay,. Complete all as specified and as directed by Engr-in-Charge.

S&F Figured glass, pin headed type and glazing with oil putty in square not exc 0.5 sqm in each pane 3mm thick. Complete all as specified and as directed by Engr-in-Charge.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm. Complete all as specified and as directed by Engr-in-Charge.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed, 300mm. Complete all as specified and as directed by Engr-in-Charge.

S&F extruded aluminium alloy handles150 mm, fabricated type., anodised. Complete all as specified and as directed by Engr-in-Charge.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,100mm bore spun pipe. Complete all as specified and as directed by Engr-in-Charge.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,75 mm bore spun pipe. Complete all as specified and as directed by Engr-in-Charge.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints,fix to wall,100mm bore spun pipe. Complete all as specified and as directed by Engr-in-Charge.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix on wall,75 mm bore spun pipe. Complete all as specified and as directed by Engr-in-Charge.

S&F Bends (any radius) with duck's foot or heel rest 100 mm dia bore. Complete all as specified and as directed by Engr-in-Charge.

S&F Bends (any radius) with duck's foot or heel rest 75 mm dia bore. Complete all as specified and as directed by Engr-in-Charge.

S&F Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia bore. Complete all as specified and as directed by Engr-in-Charge.

S&F Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75 mm dia bore. Complete all as specified and as directed by Engr-in-Charge.

S&F Cast Iron soil cowl 75 mm dia bore. Complete all as specified and as directed by Engr-in-Charge.

M&LCast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), Diameter of outlet in mm 75 mm dia. Complete all as specified and as directed by Engr-in-Charge.

M&L Salt-glazed stoneware gully traps, square or round mouthed, type `P', 125x100mm. Complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe. Complete all as specified and as directed by Engr-in-Charge.

S & F Vitreous China squatting pan, `Orrisa' pattern, size 630x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Complete all as specified and as directed by Engr-in-Charge.

M&L Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 15mm bore. Complete all as specified and as directed by Engr-in-Charge.

M&L Tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 20mm bore. Complete all as specified and as directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity 1000 Litre. Complete all as specified and as directed by Engr-in-Charge.

S&F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm bore. Complete all as specified and as directed by Engr-in-Charge.

S&F brass CP Angle stop cock fancy type concealled type long body,15 mm bore. Complete all as specified and as directed by Engr-in-Charge.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm bore. Complete all as specified and as directed by Engr-in-Charge.

S&F 15mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body. Complete all as specified and as directed by Engr-in-Charge.

S&F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed - 15mm bore. Complete all as specified and as directed by Engr-in-Charge.

S&F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and 20mm bore. Complete all as specified and as directed by Engr-in-Charge.

Supply & fixing Vireous China valveless, syphonic action type, flushing cisten low level, white, with inlet, ball valve,float and handle including brackets capacity 10 ltr. Complete all as specified and as directed by Engr-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 300mm. Complete all as specified and as directed by Engr-in-Charge.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed- 20mm bore. Complete all as specified and as directed by Engr-in-Charge.

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate. Complete all as specified and as directed by Engr-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed by Engr-in-Charge.

Supply only Integral waterproofing compound

S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws. Complete all as specefied and as directed by Engineer-in-Charge.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or including induction butt welded tubes conforming 1161-1979 grade st 240. Complete all as specified and as directed by Engr-in-Charge.

M&L Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in- cluding cleats, brackets, etc. . Complete all as specified and as directed by Engr-in-Charge.

M&L Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore. Complete all as specified and as directed by Engr-in-Charge.

M&L SWG Drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (excavation, earth work and concrete bed and haunching shall be measured and paid for separately). Complete all as specified and as directed by Engr-in-Charge.

M&L rendering 15mm thick on stone other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth w/o extra cement. Complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains. Complete all as specified and as directed by Engr-in-Charge.

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc. Complete all as specified and as directed by Engr-in-Charge.

Add or deduct from above ser item No 89.00 as above for each 25mm girth of part of thereof over 30mm. Complete all as specified and as directed by Engr-in-Charge.

M&L Construction of soakage wells of size 1.80 metre dia and 3.0 metre deep (50 users) including excavation in soft/loose soil complete all as specified and shown on drawing (Drg No CEJZ/2004/S-35, Sheet No 1/1)

M&L for GI water tubing medium grade with all fittings and fixed complete laid in trenches of 25mm bore sizes. Complete all as specified and as directed by Engr-in-Charge.

M&L for GI water tubing medium grade with all fittings and fixed complete laid in trenches of 50mm bore sizes. Complete all as specified and as directed by Engr-in-Charge.

M&L cutting into exsisting steel tubing for alterations or addition, each cut measured size 80mm bore for connection of 50mm dia bore GI pipe for new connection including Tees, bends and reducer. Complete all as specified and as directed by Engr-in-Charge.

M&L 25mm Bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed . Complete all as specified and as directed by Engr-in-Charge.

M&L 50mm Bore dia of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed . Complete all as specified and as directed by Engr-in-Charge.

M&L Construction of 900x900x900 mm brick masonary valve pit/ chamber of under mentioned size (internal dimensions and all as shown in drg TD-2004/26 sheet 1/3 to 3/3 and including necessary excavation and earth work, PCC, Plaster in CM 1:6 on inside and out side (above ground ), angle iron frame 40x40x6mm size including fabrication work, hold fast, MS sheet cover 3mm thick, duly painted with one coat of black bituminous paint of approved quality, handle and including provn of 40mm dia Godrej (freedom) lock. Complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring using approved colour coding as per IS, with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) in and including PVC Casing and capping medium grade ISI marked with mounting frame and over cover plate including, Mild steel Sunken box, earth dolly with zinc coated and 3 mm thick phenolic laminated sheet top cover including 1.5 sqmm single core PVC insulated and unsheathed copper conductor FRLS cable 1100 V grade (ISI marked) earth continuty conductor to common earth and connected as continuous earth wire to earth dolly compiete all as sprcified and ditected for followings :-

One light/fan/ bell point controlled by one switch complete all as specified and as directed by Engr-in-Charge.

One 3 pin 5 Amp socket outlet on the same board with other switches complete all as specified and as directed by Engr-in-Charge.

One 3 pin 5 Amp socket outlet on independent board with other switches complete all as specified and as directed by Engr-in-Charge.

All as per item No 98.00 above but Point wiring with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed. complete all as specified and as directed by Engr-in-Charge.

S&F Switch, piano type flush/ Bell push button type 230/250 volts ISI marked complete all as specified and as directed by Engr-in-Charge of following:-

Switch piano, flush type, Single pole , one way 5 Amp complete all as specified and as directed by Engr-in-Charge.

All as above but 15 Amp complete all as specified and as directed by Engr-in-Charge.

S & F Socket Outlet 2 in 1 Piano type 230/250 Volts, 2 in 1,3 pin 5 Amp, complete all as specified and as directed by Engr-in-Charge.

S & F Socket Outlet type 230/250 Volts, 2 in 1,3 pin, 5 & 15 Amp, flush type, complete all as specified and as directed by Engr-in-Charge.

S&F Ceiling rose surface bakelite, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified and as directed by Engr-in-Charge.

S & F Lamp holder angle type PVC/Polycarbonate type with cord grip cap insulated body with back plate for pendant fitting including 10 Watt LED Lamp complete all as specified and as directed by Engr-in-Charge.

S&F LED retrofit lamp (Size-4 feet), Battern for LED tube, universal batten for T-5 lamps surface/ wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size. . Complete all as specified and as directed by Engr-in-Charge. Make:- Havells Cat No. REGALBATTENT5UPTO1X18WDSBSWH or equivalent

Supply & Fixing mirror surface mounted LED fitting 14 W (2 Feet) provided with a high outout PMMA diffuser for glare free light, IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size.. Complete all as specified and as directed by Engr-in-Charge. Make:- Crompton Cat No. LCL-14-CDL or equivalent

S&F Security lights LED 40 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66, efficacy> 100 lm/watt, 5700K, PF>0.90, LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniformlight spread cames LED technology of Britelite. including bracket made out of suitable size of GI medium grade tubing and fixed with clamps nuts and bolts, washer . Complete all as specified and as directed by Engr-in-Charge. . Make- CG cat Pt No-LSTS-40-CDL-M or equivalant

S&F SP & N 8 ways factory made sheet distribution board double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of under mentioned ratings complete all as specified and as directed by Engr-in-Charge. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price.)

Supply and fix MCB 10 KA conforming to IS-8828 : 1996 : IEC-898 : 1995 rupturing capacity of the under mentioned type and rating complete all as specified and as directed by Engr-in-Charge.

SP from 5 upto 32 Amps rating complete all as specified and as directed by Engr-in-Charge.

SP above 32 upto 63 Amps rating complete all as specified and as directed by Engr-in-Charge.

S&F Ceiling fan size 1200mm sweep, 5 Star rating, 3 blades, white color, single phase AC, 230 Volts complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Complete all as specefied and as directed by Engineer-in-Charge. Make: Havells cat Part No. ES-50 or equivalent

M & L 16 sqmm, 2 core supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade complete all as specefied and as directed by Engineer-in-Charge. Note : Excavation and earth work shall be measured and paid under specific item of schedule.

M & L Sand cushioning to PVC under ground cable with screened and washed river sand and gently punning to provide a required cover. Complete all as specified and as directed by Engr-in-Charge.

M&L Old size bricks for protection cover to under ground cable (with sub class `B` bricks designation-75) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm. Complete all as specefied and as directed by Engineer-in-Charge.

MSR INFRATECH

M/S JALANDRA CONSTRUCTIONS

S.R.Enterprises